Empirical assessment of architecture-based reliability of open-source software

A number of analytical models have been proposed earlier for quantifying software reliability. Some of these models estimate the failure behavior of the software using black-box testing, which treats the software as a monolithic whole. With the evolution of component based software development, the necessity to use white-box testing increased. A few architecture-based reliability models, which use white-box approach, were proposed earlier and they have been validated using several small case studies and proved to be correct. However, there is a dearth of large-scale empirical data used for reliability analysis. This thesis enriches the empirical knowledge in software reliability engineering. We use a real, large-scale case study, GCC compiler, for our experiments. To the best of out knowledge, this is the most comprehensive case study ever used for software reliability analysis. The software is instrumented with a profiler, to extract the execution profiles of the test cases. The execution profiles form the basis for building the operational profile of the system, which describes the software usage. The test case failures are traced back to the faults in the source code to analyze the failure behavior of the components. These results are used to estimate the reliability of the software, as well as the uncertainty in the reliability analysis using entropy

Space Applications of Automation, Robotics and Machine Intelligence Systems (ARAMIS). Volume 4: Supplement, Appendix 4.3: Candidate ARAMIS Capabilities

Potential applications of automation, robotics, and machine intelligence systems (ARAMIS) to space activities, and to their related ground support functions, in the years 1985-2000, so that NASA may make informed decisions on which aspects of ARAMIS to develop. The study first identifies the specific tasks which will be required by future space projects. It then defines ARAMIS options which are candidates for those space project tasks, and evaluates the relative merits of these options. Finally, the study identifies promising applications of ARAMIS, and recommends specific areas for further research. The ARAMIS options defined and researched by the study group span the range from fully human to fully machine, including a number of intermediate options (e.g., humans assisted by computers, and various levels of teleoperation). By including this spectrum, the study searches for the optimum mix of humans and machines for space project tasks

Multi-criteria and satisfaction oriented scheduling for hybrid distributed computing infrastructures

International audienceAssembling and simultaneously using different types of distributed computing infrastructures (DCI) like Grids and Clouds is an increasingly common situation. Because infrastructures are characterized by different attributes such as price, performance, trust, greenness, the task scheduling problem becomes more complex and challenging. In this paper we present the design for a fault-tolerant and trust-aware scheduler, which allows to execute Bag-of-Tasks applications on elastic and hybrid DCI, following user-defined scheduling strategies. Our approach, named Promethee scheduler, combines a pull-based scheduler with multi-criteria Promethee decision making algorithm. Because multi-criteria scheduling leads to the multiplication of the possible scheduling strategies, we propose SOFT, a methodology that allows to find the optimal scheduling strategies given a set of application requirements. The validation of this method is performed with a simulator that fully implements the Promethee scheduler and recreates an hybrid DCI environment including Internet Desktop Grid, Cloud and Best Effort Grid based on real failure traces. A set of experiments shows that the Promethee scheduler is able to maximize user satisfaction expressed accordingly to three distinct criteria: price, expected completion time and trust, while maximizing the infrastructure useful employment from the resources owner point of view. Finally, we present an optimization which bounds the computation time of the Promethee algorithm, making realistic the possible integration of the scheduler to a wide range of resource management software

Software Engineering Laboratory Series: Collected Software Engineering Papers

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document

Fault Diagnosis and Failure Prognostics of Lithium-ion Battery based on Least Squares Support Vector Machine and Memory Particle Filter Framework

123456A novel data driven approach is developed for fault diagnosis and remaining useful life (RUL) prognostics for lithium-ion batteries using Least Square Support Vector Machine (LS-SVM) and Memory-Particle Filter (M-PF). Unlike traditional data-driven models for capacity fault diagnosis and failure prognosis, which require multidimensional physical characteristics, the proposed algorithm uses only two variables: Energy Efficiency (EE), and Work Temperature. The aim of this novel framework is to improve the accuracy of incipient and abrupt faults diagnosis and failure prognosis. First, the LSSVM is used to generate residual signal based on capacity fade trends of the Li-ion batteries. Second, adaptive threshold model is developed based on several factors including input, output model error, disturbance, and drift parameter. The adaptive threshold is used to tackle the shortcoming of a fixed threshold. Third, the M-PF is proposed as the new method for failure prognostic to determine Remaining Useful Life (RUL). The M-PF is based on the assumption of the availability of real-time observation and historical data, where the historical failure data can be used instead of the physical failure model within the particle filter. The feasibility of the framework is validated using Li-ion battery prognostic data obtained from the National Aeronautic and Space Administration (NASA) Ames Prognostic Center of Excellence (PCoE). The experimental results show the following: (1) fewer data dimensions for the input data are required compared to traditional empirical models; (2) the proposed diagnostic approach provides an effective way of diagnosing Li-ion battery fault; (3) the proposed prognostic approach can predict the RUL of Li-ion batteries with small error, and has high prediction accuracy; and, (4) the proposed prognostic approach shows that historical failure data can be used instead of a physical failure model in the particle filter

Reliable and energy efficient resource provisioning in cloud computing systems

Cloud Computing has revolutionized the Information Technology sector by giving computing a perspective of service. The services of cloud computing can be accessed by users not knowing about the underlying system with easy-to-use portals. To provide such an abstract view, cloud computing systems have to perform many complex operations besides managing a large underlying infrastructure. Such complex operations confront service providers with many challenges such as security, sustainability, reliability, energy consumption and resource management. Among all the challenges, reliability and energy consumption are two key challenges focused on in this thesis because of their conflicting nature. Current solutions either focused on reliability techniques or energy efficiency methods. But it has been observed that mechanisms providing reliability in cloud computing systems can deteriorate the energy consumption. Adding backup resources and running replicated systems provide strong fault tolerance but also increase energy consumption. Reducing energy consumption by running resources on low power scaling levels or by reducing the number of active but idle sitting resources such as backup resources reduces the system reliability. This creates a critical trade-off between these two metrics that are investigated in this thesis. To address this problem, this thesis presents novel resource management policies which target the provisioning of best resources in terms of reliability and energy efficiency and allocate them to suitable virtual machines. A mathematical framework showing interplay between reliability and energy consumption is also proposed in this thesis. A formal method to calculate the finishing time of tasks running in a cloud computing environment impacted with independent and correlated failures is also provided. The proposed policies adopted various fault tolerance mechanisms while satisfying the constraints such as task deadlines and utility values. This thesis also provides a novel failure-aware VM consolidation method, which takes the failure characteristics of resources into consideration before performing VM consolidation. All the proposed resource management methods are evaluated by using real failure traces collected from various distributed computing sites. In order to perform the evaluation, a cloud computing framework, 'ReliableCloudSim' capable of simulating failure-prone cloud computing systems is developed. The key research findings and contributions of this thesis are: 1. If the emphasis is given only to energy optimization without considering reliability in a failure prone cloud computing environment, the results can be contrary to the intuitive expectations. Rather than reducing energy consumption, a system ends up consuming more energy due to the energy losses incurred because of failure overheads. 2. While performing VM consolidation in a failure prone cloud computing environment, a significant improvement in terms of energy efficiency and reliability can be achieved by considering failure characteristics of physical resources. 3. By considering correlated occurrence of failures during resource provisioning and VM allocation, the service downtime or interruption is reduced significantly by 34% in comparison to the environments with the assumption of independent occurrence of failures. Moreover, measured by our mathematical model, the ratio of reliability and energy consumption is improved by 14%

Collected software engineering papers, volume 12

This document is a collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) from November 1993 through October 1994. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. This is the 12th such volume of technical papers produced by the SEL. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. Additional information about the SEL and its research efforts may be obtained from the sources listed in the bibliography at the end of this document

CloudOps: Towards the Operationalization of the Cloud Continuum: Concepts, Challenges and a Reference Framework

The current trend of developing highly distributed, context aware, heterogeneous computing intense and data-sensitive applications is changing the boundaries of cloud computing. Encouraged by the growing IoT paradigm and with flexible edge devices available, an ecosystem of a combination of resources, ranging from high density compute and storage to very lightweight embedded computers running on batteries or solar power, is available for DevOps teams from what is known as the Cloud Continuum. In this dynamic context, manageability is key, as well as controlled operations and resources monitoring for handling anomalies. Unfortunately, the operation and management of such heterogeneous computing environments (including edge, cloud and network services) is complex and operators face challenges such as the continuous optimization and autonomous (re-)deployment of context-aware stateless and stateful applications where, however, they must ensure service continuity while anticipating potential failures in the underlying infrastructure. In this paper, we propose a novel CloudOps workflow (extending the traditional DevOps pipeline), proposing techniques and methods for applications’ operators to fully embrace the possibilities of the Cloud Continuum. Our approach will support DevOps teams in the operationalization of the Cloud Continuum. Secondly, we provide an extensive explanation of the scope, possibilities and future of the CloudOps.This research was funded by the European project PIACERE (Horizon 2020 Research and Innovation Programme, under grant agreement No. 101000162)

CloudOps: Towards the Operationalization of the Cloud Continuum: Concepts, Challenges and a Reference Framework

The current trend of developing highly distributed, context aware, heterogeneous computing intense and data-sensitive applications is changing the boundaries of cloud computing. Encouraged by the growing IoT paradigm and with flexible edge devices available, an ecosystem of a combination of resources, ranging from high density compute and storage to very lightweight embedded computers running on batteries or solar power, is available for DevOps teams from what is known as the Cloud Continuum. In this dynamic context, manageability is key, as well as controlled operations and resources monitoring for handling anomalies. Unfortunately, the operation and management of such heterogeneous computing environments (including edge, cloud and network services) is complex and operators face challenges such as the continuous optimization and autonomous (re-)deployment of context-aware stateless and stateful applications where, however, they must ensure service continuity while anticipating potential failures in the underlying infrastructure. In this paper, we propose a novel CloudOps workflow (extending the traditional DevOps pipeline), proposing techniques and methods for applications’ operators to fully embrace the possibilities of the Cloud Continuum. Our approach will support DevOps teams in the operationalization of the Cloud Continuum. Secondly, we provide an extensive explanation of the scope, possibilities and future of the CloudOps.This research was funded by the European project PIACERE (Horizon 2020 Research and Innovation Programme, under grant agreement No. 101000162)