119 research outputs found

    Optimal proportional-integral guidance with reduced sensitivity to target maneuvers

    Get PDF
    This paper proposes a new optimal guidance law based on proportional-integral (PI) concept to reduce the sensitivity to unknown target maneuvers. Compared to existing PI guidance laws, the proposed guidance command is derived in the optimal control framework while guaranteeing finite time convergence. The kinematics equation with respect to the zero-effortmiss (ZEM) is utilized and the integral ZEM is augmented as a new system state. The proposed guidance law is derived through the Schwarz's inequality method. The closed-form solution of proposed guidance law is presented to provide better insight of its properties. Additionally, the working principle of the integral command is investigated to show why the proposed guidance law is robust against unknown target accelerations. The analytical results reveal that the proposed optimal guidance law is exactly the same as an instantaneous direct model reference adaptive guidance law with a pre-specified reference model. The potential significance of the obtained results is that it can provide a point of connection between PI guidance laws and adaptive guidance laws. Therefore, it allows us to have better understanding of the physical meaning of both guidance laws and provides the possibility in designing a new guidance law that takes advantages of both approaches. Finally, the performance of the guidance law developed is demonstrated by nonlinear numerical simulations with extensive comparisons

    Three-dimensional optimal impact time guidance for antiship missiles

    Get PDF
    Introduction: The primary objective of missile guidance laws is to drive the missile to intercept a specific target with zero miss distance. Proportional navigation guidance (PNG) has been proved to be an efficient and simple guidance algorithm for missile systems, thus showing wide applications in the past few decades [1]. The optimality of PNG was analyzed in [2] and its extension to three-dimensional (3D) scenario can be found at [3]. In the context of modern warfare, many high-value battleships, like destroyers and aircraft carriers, are equipped with powerful self-defense systems against anti-ship missiles [4]. In order to penetrate these formidable defensive systems, the concept of salvo attack or simultaneous attack was introduced: many missiles are required to hit a battleship simultaneously, albeit their di.erent initial locations. One typical solution of simultaneous attack is impact time control guidance. Generally, impact time control can be classified into two categories: (1) specify the desired impact time and control each missile to satisfy the desired impact time constraint individually; and (2) synchronize the impact time either in a distributed or decentralized fashion through a communication network among all interceptors

    Adaptive Robust Guidance Scheme Based on the Sliding Mode Control in an Aircraft Pursuit-Evasion Problem

    Get PDF
    In this chapter, a robust guidance scheme utilizing a line-of-sight (LOS) observation is presented. Initial relative speed and distance, and error boundaries of them are estimated in accordance with the interceptor-target relative motion kinematics. A robust guidance scheme based on the sliding mode control (SMC) is developed, which requires the boundaries of the target maneuver, and inevitably has jitter phenomenon. For solving above-mentioned problems, an estimation to the target acceleration’s boundary is developed for enhancing robustness of the guidance scheme and the Lyapunov stabilization is analyzed. The proposed robust guidance scheme’s brief characteristic is to reduce the effect of relative speed and distance, to reduce the effect of target maneuverability on the guidance precision, and to strengthen the influence of line-of-sight angular velocity. The proposed scheme’s performances are validated by the simulations of different target maneuvers under two worst-case conditions

    Optimal terminal guidance for exoatmospheric interception

    Get PDF
    AbstractIn this study, two optimal terminal guidance (OTG) laws, one of which takes into account the final velocity vector constraint, are developed for exoatmospheric interception using optimal control theory. In exoatmospheric interception, because the proposed guidance laws give full consideration to the effect of gravity, they consume much less fuel than the traditional guidance laws while requiring a light computational load. In the development of the guidance laws, a unified optimal guidance problem is put forward, where the final velocity vector constraint can be considered or neglected by properly adjusting a parameter in the cost function. To make this problem analytically solvable, a linear model is used to approximate the gravity difference, the difference of the gravitational accelerations of the target and interceptor. Additionally, an example is provided to show that some achievements of this study can be used to significantly improve the fuel efficiency of the pulsed guidance employed by the interceptor whose divert thrust level is fixed

    Optimality of error dynamics in missile guidance problems

    Get PDF

    Unified control parametrisation approach for finite-horizon feedback control with trajectory shaping

    Get PDF
    This study presents control parametrisation as a unifying framework for designing a linear feedback control law that achieves finite-time transfer of output as well as trajectory shaping. Representing control input as a linear combination of independent basis functions allows wide variability in the resultant feedback control laws through selection of the number and types of basis functions. Given an array of basis functions that meets the trajectory shaping necessities, the unified design approach proceeds with determination of the coefficients so that the predicted trajectory attains the desired output at the final time. The input evaluated with the coefficients found at each instance essentially turns out to be a linear state feedback policy with an additional feedforward term and time-dependent gains which is appropriate for practical use. The unified control parametrisation approach lends itself well to missile guidance applications with the expandability and direct trajectory shaping capability that it provides. To emphasise expandability of the framework, this study revisits the trajectory shaping guidance laws from the control parametrisation viewpoint and shows how the notion of specifying input basis functions not only generalises various existing methods but also enables further extensions. Furthermore, an application to integrated guidance and control illustrates the strength of design process in handling the shaping requirements more directly through construction of appropriate basis

    Three-dimensional biased proportional navigation guidance based on spatial rotation of predicted final velocity

    Get PDF
    This study presents the design of three-dimensional biased proportional navigation guidance laws for arrival at a stationary target along a desired direction based on spatial rotation of predicted final velocity vector. The focus is on full constructive derivation using vector-form expressions without introducing local representation of rotation such as Euler angles or quaternions. The proposed approach synthesises the bias command in the form of an angular velocity vector through realisation of the predictive control design philosophy, the direction which has been unexplored in a three-dimensional setting. The proposed approach avoids heuristic choices and approximations in the design process and hence overcomes the limitation of earlier studies. The vector-form design approach provides theoretical and practical advantages including rigour in derivation, clear geometric understandings about the problem provided by identification of the most effective direction for rotation of final velocity, independence from selection of a fixed coordinate system, avoidance of singularities in local representations, more direct trajectory shaping, and simple implementation

    Guidance and control for defense systems against ballistic threats

    Get PDF
    A defense system against ballistic threat is a very complex system from the engineering point of view. It involves different kinds of subsystems and, at the same time, it presents very strict requirements. Technology evolution drives the need of constantly upgrading system’s capabilities. The guidance and control fields are two of the areas with the best progress possibilities. This thesis deals with the guidance and control problems involved in a defense system against ballistic threats. This study was undertaken by analyzing the mission of an intercontinental ballistic missile. Trajectory reconstruction from radar and satellite measurements was carried out with an estimation algorithm for nonlinear systems. Knowing the trajectory is a prerequisite for intercepting the ballistic missile. Interception takes place thanks to a dedicated tactical missile. The guidance and control of this missile were also studied in this work. Particular attention was paid on the estimation of engagement’s variables inside the homing loop. Interceptor missiles are usually equipped with a seeker that provides the angle under which the interceptor sees its target. This single measurement does not guarantee the observability of the variables required by advanced guidance laws such as APN, OGL, or differential games-based laws. A new guidance strategy was proposed, that solves the bad observability problems and returns satisfactory engagement performances. The thesis is concluded by a study of the interceptor most suitable aerodynamic configuration in order to implement the proposed strategy, and by the relative autopilot design. The autopilot implements the lateral acceleration commands from the guidance system. The design was carried out with linear control techniques, considering requirements on the rising time, actuators maximum effort, and response to a bang-bang guidance command. The analysis of the proposed solutions was carried on by means of numerical simulations, developed for each single case-study

    Optimal Control Methods for Missile Evasion

    Get PDF
    Optimal control theory is applied to the study of missile evasion, particularly in the case of a single pursuing missile versus a single evading aircraft. It is proposed to divide the evasion problem into two phases, where the primary considerations are energy and maneuverability, respectively. Traditional evasion tactics are well documented for use in the maneuverability phase. To represent the first phase dominated by energy management, the optimal control problem may be posed in two ways, as a fixed final time problem with the objective of maximizing the final distance between the evader and pursuer, and as a free final time problem with the objective of maximizing the final time when the missile reaches some capture distance away from the evader.These two optimal control problems are studied under several different scenarios regarding assumptions about the pursuer. First, a suboptimal control strategy, proportional navigation, is used for the pursuer. Second, it is assumed that the pursuer acts optimally, requiring the solution of a two-sided optimal control problem, otherwise known as a differential game. The resulting trajectory is known as a minimax, and it can be shown that it accounts for uncertainty in the pursuer\u27s control strategy. Finally, a pursuer whose motion and state are uncertain is studied in the context of Receding Horizon Control and Real Time Optimal Control. The results highlight how updating the optimal control trajectory reduces the uncertainty in the resulting miss distance
    • …
    corecore