Cross-layer design of multi-hop wireless networks

MULTI -hop wireless networks are usually defined as a collection of nodes equipped with radio transmitters, which not only have the capability to communicate each other in a multi-hop fashion, but also to route each others’ data packets. The distributed nature of such networks makes them suitable for a variety of applications where there are no assumed reliable central entities, or controllers, and may significantly improve the scalability issues of conventional single-hop wireless networks. This Ph.D. dissertation mainly investigates two aspects of the research issues related to the efficient multi-hop wireless networks design, namely: (a) network protocols and (b) network management, both in cross-layer design paradigms to ensure the notion of service quality, such as quality of service (QoS) in wireless mesh networks (WMNs) for backhaul applications and quality of information (QoI) in wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of this Ph.D. dissertation, different network settings are used as illustrative examples, however the proposed algorithms, methodologies, protocols, and models are not restricted in the considered networks, but rather have wide applicability. First, this dissertation proposes a cross-layer design framework integrating a distributed proportional-fair scheduler and a QoS routing algorithm, while using WMNs as an illustrative example. The proposed approach has significant performance gain compared with other network protocols. Second, this dissertation proposes a generic admission control methodology for any packet network, wired and wireless, by modeling the network as a black box, and using a generic mathematical 0. Abstract 3 function and Taylor expansion to capture the admission impact. Third, this dissertation further enhances the previous designs by proposing a negotiation process, to bridge the applications’ service quality demands and the resource management, while using WSNs as an illustrative example. This approach allows the negotiation among different service classes and WSN resource allocations to reach the optimal operational status. Finally, the guarantees of the service quality are extended to the environment of multiple, disconnected, mobile subnetworks, where the question of how to maintain communications using dynamically controlled, unmanned data ferries is investigated

Infocast: A New Paradigm for Collaborative Content Distribution from Roadside Units to Vehicular Networks Using Rateless Codes

In this paper, we address the problem of distributing a large amount of bulk data to a sparse vehicular network from roadside infostations, using efficient vehicle-to-vehicle collaboration. Due to the highly dynamic nature of the underlying vehicular network topology, we depart from architectures requiring centralized coordination, reliable MAC scheduling, or global network state knowledge, and instead adopt a distributed paradigm with simple protocols. In other words, we investigate the problem of reliable dissemination from multiple sources when each node in the network shares a limited amount of its resources for cooperating with others. By using \emph{rateless} coding at the Road Side Unit (RSU) and using vehicles as data carriers, we describe an efficient way to achieve reliable dissemination to all nodes (even disconnected clusters in the network). In the nutshell, we explore vehicles as mobile storage devices. We then develop a method to keep the density of the rateless codes packets as a function of distance from the RSU at the desired level set for the target decoding distance. We investigate various tradeoffs involving buffer size, maximum capacity, and the mobility parameter of the vehicles

Self-Stabilizing TDMA Algorithms for Dynamic Wireless Ad-hoc Networks

In dynamic wireless ad-hoc networks (DynWANs), autonomous computing devices set up a network for the communication needs of the moment. These networks require the implementation of a medium access control (MAC) layer. We consider MAC protocols for DynWANs that need to be autonomous and robust as well as have high bandwidth utilization, high predictability degree of bandwidth allocation, and low communication delay in the presence of frequent topological changes to the communication network. Recent studies have shown that existing implementations cannot guarantee the necessary satisfaction of these timing requirements. We propose a self-stabilizing MAC algorithm for DynWANs that guarantees a short convergence period, and by that, it can facilitate the satisfaction of severe timing requirements, such as the above. Besides the contribution in the algorithmic front of research, we expect that our proposal can enable quicker adoption by practitioners and faster deployment of DynWANs that are subject changes in the network topology

A framework for energy based performability models for wireless sensor networks

A novel idea of alternating node operations between Active and Sleep modes in Wireless Sensor Network (WSN) has successfully been used to save node power consumption. The idea which started off as a simple implementation of a timer in most protocols has been improved over the years to dynamically change with traffic conditions and the nature of application area. Recently, use of a second low power radio transceiver to triggered Active/Sleep modes has also been made. Active/Sleep operation modes have also been used to separately model and evaluate performance and availability of WSNs. The advancement in technology and continuous improvements of the existing protocols and application implementation demands continue to pose great challenges to the existing performance and availability models. In this study the need for integrating performance and availability studies of WSNs in the presence of both channel and node failures and repairs is investigated. A framework that outlines and characterizes key models required for integration of performance and availability of WSN is in turn outlined. Possible solution techniques for such models are also highlighted. Finally it is shown that the resulting models may be used to comparatively evaluate energy consumption of the existing motes and WSNs as well as deriving required performance measures

Goodbye, ALOHA!

©2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The vision of the Internet of Things (IoT) to interconnect and Internet-connect everyday people, objects, and machines poses new challenges in the design of wireless communication networks. The design of medium access control (MAC) protocols has been traditionally an intense area of research due to their high impact on the overall performance of wireless communications. The majority of research activities in this field deal with different variations of protocols somehow based on ALOHA, either with or without listen before talk, i.e., carrier sensing multiple access. These protocols operate well under low traffic loads and low number of simultaneous devices. However, they suffer from congestion as the traffic load and the number of devices increase. For this reason, unless revisited, the MAC layer can become a bottleneck for the success of the IoT. In this paper, we provide an overview of the existing MAC solutions for the IoT, describing current limitations and envisioned challenges for the near future. Motivated by those, we identify a family of simple algorithms based on distributed queueing (DQ), which can operate for an infinite number of devices generating any traffic load and pattern. A description of the DQ mechanism is provided and most relevant existing studies of DQ applied in different scenarios are described in this paper. In addition, we provide a novel performance evaluation of DQ when applied for the IoT. Finally, a description of the very first demo of DQ for its use in the IoT is also included in this paper.Peer ReviewedPostprint (author's final draft

Mobile Ad-Hoc Networks

Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of-the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: quality-of-service and video communication, routing protocol and cross-layer design. A few interesting problems about security and delay-tolerant networks are also discussed. This book is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks

Design and Implementation of a Communication Protocol to Improve Multimedia QoS and QoE in Wireless Ad Hoc Networks

[EN] This dissertation addresses the problem of multimedia delivery over multi-hop ad hoc wireless networks, and especially over wireless sensor networks. Due to their characteristics of low power consumption, low processing capacity and low memory capacity, they have major difficulties in achieving optimal quality levels demanded by end users in such communications. In the first part of this work, it has been carried out a study to determine the behavior of a variety of multimedia streams and how they are affected by the network conditions when they are transmitted over topologies formed by devices of different technologies in multi hop wireless ad hoc mode. To achieve this goal, we have performed experimental tests using a test bench, which combine the main codecs used in audio and video streaming over IP networks with different sound and video captures representing the characteristic patterns of multimedia services such as phone calls, video communications, IPTV and video on demand (VOD). With the information gathered in the laboratory, we have been able to establish the correlation between the induced changes in the physical and logical topology and the network parameters that measure the quality of service (QoS) of a multimedia transmission, such as latency, jitter or packet loss. At this stage of the investigation, a study was performed to determine the state of the art of the proposed protocols, algorithms, and practical implementations that have been explicitly developed to optimize the multimedia transmission over wireless ad hoc networks, especially in ad hoc networks using clusters of nodes distributed over a geographic area and wireless sensor networks. Next step of this research was the development of an algorithm focused on the logical organization of clusters formed by nodes capable of adapting to the circumstances of real-time traffic. The stated goal was to achieve the maximum utilization of the resources offered by the set of nodes that forms the network, allowing simultaneously sending reliably and efficiently all types of content through them, and mixing conventional IP data traffic with multimedia traffic with stringent QoS and QoE requirements. Using the information gathered in the previous phase, we have developed a network architecture that improves overall network performance and multimedia streaming. In parallel, it has been designed and programmed a communication protocol that allows implementing the proposal and testing its operation on real network infrastructures. In the last phase of this thesis we have focused our work on sending multimedia in wireless sensor networks (WSN). Based on the above results, we have adapted both the architecture and the communication protocol for this particular type of network, whose use has been growing hugely in recent years.[ES] Esta tesis doctoral aborda el problema de la distribución de contenidos multimedia a través de redes inalámbricas ad hoc multisalto, especialmente las redes inalámbricas de sensores que, debido a sus características de bajo consumo energético, baja capacidad de procesamiento y baja capacidad de memoria, plantean grandes dificultades para alcanzar los niveles de calidad óptimos que exigen los usuarios finales en dicho tipo de comunicaciones. En la primera parte de este trabajo se ha llevado a cabo un estudio para determinar el comportamiento de una gran variedad de flujos multimedia y como se ven afectados por las condiciones de la red cuando son transmitidos a través topologías formadas por dispositivos de diferentes tecnologías que se comunican en modo ad hoc multisalto inalámbrico. Para ello, se han realizado pruebas experimentales sobre una maqueta de laboratorio, combinando los principales códecs empleados en la transmisión de audio y video a través de redes IP con diversas capturas de sonido y video que representan patrones característicos de servicios multimedia tales como las llamadas telefónicas, videoconferencias, IPTV o video bajo demanda (VOD). Con la información reunida en el laboratorio se ha podido establecer la correlación entre los cambios inducidos en la topología física y lógica de la red con los parámetros que miden la calidad de servicio (QoS) de una transmisión multimedia, tales como la latencia el jitter o la pérdida de paquetes. En esta fase de la investigación se realiza un estudio para determinar el estado del arte de las propuestas de desarrollo e implementación de protocolos y algoritmos que se han generado de forma explícita para optimizar la transmisión de tráfico multimedia sobre redes ad hoc inalámbricas, especialmente en las redes inalámbricas de sensores y redes ad hoc utilizando clústeres de nodos distribuidos en un espacio geográfico. El siguiente paso en la investigación ha consistido en el desarrollo de un algoritmo propio para la organización lógica de clústeres formados por nodos capaces de adaptarse a las circunstancias del tráfico en tiempo real. El objetivo planteado es conseguir un aprovechamiento máximo de los recursos ofrecidos por el conjunto de nodos que forman la red, permitiendo de forma simultánea el envío de todo tipo de contenidos a través de ellos de forma confiable y eficiente, permitiendo la convivencia de tráfico de datos IP convencional con tráfico multimedia con requisitos exigentes de QoS y QoE. A partir de la información conseguida en la fase anterior, se ha desarrollado una arquitectura de red que mejora el rendimiento general de la red y el de las transmisiones multimedia de audio y video en particular. De forma paralela, se ha diseñado y programado un protocolo de comunicación que permite implementar el modelo y testear su funcionamiento sobre infraestructuras de red reales. En la última fase de esta tesis se ha dirigido la atención hacia la transmisión multimedia en las redes de sensores inalámbricos (WSN). Partiendo de los resultados anteriores, se ha adaptado tanto la arquitectura como el protocolo de comunicaciones para este tipo concreto de red, cuyo uso se ha extendido en los últimos años de forma considerable[CA] Esta tesi doctoral aborda el problema de la distribució de continguts multimèdia a través de xarxes sense fil ad hoc multi salt, especialment les xarxes sense fil de sensors que, a causa de les seues característiques de baix consum energètic, baixa capacitat de processament i baixa capacitat de memòria, plantegen grans dificultats per a aconseguir els nivells de qualitat òptims que exigixen els usuaris finals en eixos tipus de comunicacions. En la primera part d'este treball s'ha dut a terme un estudi per a determinar el comportament d'una gran varietat de fluxos multimèdia i com es veuen afectats per les condicions de la xarxa quan són transmesos a través topologies formades per dispositius de diferents tecnologies que es comuniquen en mode ad hoc multi salt sense fil. Per a això, s'han realitzat proves experimentals sobre una maqueta de laboratori, combinant els principals códecs empleats en la transmissió d'àudio i vídeo a través de xarxes IP amb diverses captures de so i vídeo que representen patrons característics de serveis multimèdia com son les cridades telefòniques, videoconferències, IPTV o vídeo baix demanda (VOD). Amb la informació reunida en el laboratori s'ha pogut establir la correlació entre els canvis induïts en la topologia física i lògica de la xarxa amb els paràmetres que mesuren la qualitat de servei (QoS) d'una transmissió multimèdia, com la latència el jitter o la pèrdua de paquets. En esta fase de la investigació es realitza un estudi per a determinar l'estat de l'art de les propostes de desenvolupament i implementació de protocols i algoritmes que s'han generat de forma explícita per a optimitzar la transmissió de tràfic multimèdia sobre xarxes ad hoc sense fil, especialment en les xarxes sense fil de sensors and xarxes ad hoc utilitzant clusters de nodes distribuïts en un espai geogràfic. El següent pas en la investigació ha consistit en el desenvolupament d'un algoritme propi per a l'organització lògica de clusters formats per nodes capaços d'adaptar-se a les circumstàncies del tràfic en temps real. L'objectiu plantejat és aconseguir un aprofitament màxim dels recursos oferits pel conjunt de nodes que formen la xarxa, permetent de forma simultània l'enviament de qualsevol tipus de continguts a través d'ells de forma confiable i eficient, permetent la convivència de tràfic de dades IP convencional amb tràfic multimèdia amb requisits exigents de QoS i QoE. A partir de la informació aconseguida en la fase anterior, s'ha desenvolupat una arquitectura de xarxa que millora el rendiment general de la xarxa i el de les transmissions multimèdia d'àudio i vídeo en particular. De forma paral¿lela, s'ha dissenyat i programat un protocol de comunicació que permet implementar el model i testejar el seu funcionament sobre infraestructures de xarxa reals. En l'última fase d'esta tesi s'ha dirigit l'atenció cap a la transmissió multimèdia en les xarxes de sensors sense fil (WSN). Partint dels resultats anteriors, s'ha adaptat tant l'arquitectura com el protocol de comunicacions per a aquest tipus concret de xarxa, l'ús del qual s'ha estés en els últims anys de forma considerable.Díaz Santos, JR. (2016). Design and Implementation of a Communication Protocol to Improve Multimedia QoS and QoE in Wireless Ad Hoc Networks [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/62162TESI