411 research outputs found
The Impact of QoS Constraints on the Energy Efficiency of Fixed-Rate Wireless Transmissions
Transmission over wireless fading channels under quality of service (QoS)
constraints is studied when only the receiver has channel side information.
Being unaware of the channel conditions, transmitter is assumed to send the
information at a fixed rate. Under these assumptions, a two-state (ON-OFF)
transmission model is adopted, where information is transmitted reliably at a
fixed rate in the ON state while no reliable transmission occurs in the OFF
state. QoS limitations are imposed as constraints on buffer violation
probabilities, and effective capacity formulation is used to identify the
maximum throughput that a wireless channel can sustain while satisfying
statistical QoS constraints. Energy efficiency is investigated by obtaining the
bit energy required at zero spectral efficiency and the wideband slope in both
wideband and low-power regimes assuming that the receiver has perfect channel
side information (CSI). In both wideband and low-power regimes, the increased
energy requirements due to the presence of QoS constraints are quantified.
Comparisons with variable-rate/fixed-power and variable-rate/variable-power
cases are given. Energy efficiency is further analyzed in the presence of
channel uncertainties. The optimal fraction of power allocated to training is
identified under QoS constraints. It is proven that the minimum bit energy in
the low-power regime is attained at a certain nonzero power level below which
bit energy increases without bound with vanishing power
Delay Performance of MISO Wireless Communications
Ultra-reliable, low latency communications (URLLC) are currently attracting
significant attention due to the emergence of mission-critical applications and
device-centric communication. URLLC will entail a fundamental paradigm shift
from throughput-oriented system design towards holistic designs for guaranteed
and reliable end-to-end latency. A deep understanding of the delay performance
of wireless networks is essential for efficient URLLC systems. In this paper,
we investigate the network layer performance of multiple-input, single-output
(MISO) systems under statistical delay constraints. We provide closed-form
expressions for MISO diversity-oriented service process and derive
probabilistic delay bounds using tools from stochastic network calculus. In
particular, we analyze transmit beamforming with perfect and imperfect channel
knowledge and compare it with orthogonal space-time codes and antenna
selection. The effect of transmit power, number of antennas, and finite
blocklength channel coding on the delay distribution is also investigated. Our
higher layer performance results reveal key insights of MISO channels and
provide useful guidelines for the design of ultra-reliable communication
systems that can guarantee the stringent URLLC latency requirements.Comment: This work has been submitted to the IEEE for possible publication.
Copyright may be transferred without notice, after which this version may no
longer be accessibl
A Network Calculus Approach for the Analysis of Multi-Hop Fading Channels
A fundamental problem in the delay and backlog analysis across multi-hop
paths in wireless networks is how to account for the random properties of the
wireless channel. Since the usual statistical models for radio signals in a
propagation environment do not lend themselves easily to a description of the
available service rate on a wireless link, the performance analysis of wireless
networks has resorted to higher-layer abstractions, e.g., using Markov chain
models. In this work, we propose a network calculus that can incorporate common
statistical models of fading channels and obtain statistical bounds on delay
and backlog across multiple nodes. We conduct the analysis in a transfer
domain, which we refer to as the `SNR domain', where the service process at a
link is characterized by the instantaneous signal-to-noise ratio at the
receiver. We discover that, in the transfer domain, the network model is
governed by a dioid algebra, which we refer to as (min,x)-algebra. Using this
algebra we derive the desired delay and backlog bounds. An application of the
analysis is demonstrated for a simple multi-hop network with Rayleigh fading
channels and for a network with cross traffic.Comment: 26 page
Uncoded space-time labelling diversity : data rate & reliability enhancements and application to real-world satellite broadcasting.
Doctoral Degree. University of KwaZulu-Natal, Durban.Abstract available in PDF
Information-theoretic analysis of a family of additive energy channels
This dissertation studies a new family of channel models for non-coherent com- munications, the additive energy channels. By construction, the additive en- ergy channels occupy an intermediate region between two widely used channel models: the discrete-time Gaussian channel, used to represent coherent com- munication systems operating at radio and microwave frequencies, and the discrete-time Poisson channel, which often appears in the analysis of intensity- modulated systems working at optical frequencies. The additive energy chan- nels share with the Gaussian channel the additivity between a useful signal and a noise component. However, the signal and noise components are not complex- valued quadrature amplitudes but, as in the Poisson channel, non-negative real numbers, the energy or squared modulus of the complex amplitude. The additive energy channels come in two variants, depending on whether the channel output is discrete or continuous. In the former case, the energy is a multiple of a fundamental unit, the quantum of energy, whereas in the second the value of the energy can take on any non-negative real number. For con- tinuous output the additive noise has an exponential density, as for the energy of a sample of complex Gaussian noise. For discrete, or quantized, energy the signal component is randomly distributed according to a Poisson distribution whose mean is the signal energy of the corresponding Gaussian channel; part of the total noise at the channel output is thus a signal-dependent, Poisson noise component. Moreover, the additive noise has a geometric distribution, the discrete counterpart of the exponential density. Contrary to the common engineering wisdom that not using the quadrature amplitude incurs in a signi¯cant performance penalty, it is shown in this dis- sertation that the capacity of the additive energy channels essentially coincides with that of a coherent Gaussian model under a broad set of circumstances. Moreover, common modulation and coding techniques for the Gaussian chan- nel often admit a natural extension to the additive energy channels, and their performance frequently parallels those of the Gaussian channel methods. Four information-theoretic quantities, covering both theoretical and practi- cal aspects of the reliable transmission of information, are studied: the channel capacity, the minimum energy per bit, the constrained capacity when a given digital modulation format is used, and the pairwise error probability. Of these quantities, the channel capacity sets a fundamental limit on the transmission capabilities of the channel but is sometimes di±cult to determine. The min- imum energy per bit (or its inverse, the capacity per unit cost), on the other hand, turns out to be easier to determine, and may be used to analyze the performance of systems operating at low levels of signal energy. Closer to a practical ¯gure of merit is the constrained capacity, which estimates the largest amount of information which can be transmitted by using a speci¯c digital modulation format. Its study is complemented by the computation of the pairwise error probability, an e®ective tool to estimate the performance of practical coded communication systems. Regarding the channel capacity, the capacity of the continuous additive energy channel is found to coincide with that of a Gaussian channel with iden- tical signal-to-noise ratio. Also, an upper bound |the tightest known| to the capacity of the discrete-time Poisson channel is derived. The capacity of the quantized additive energy channel is shown to have two distinct functional forms: if additive noise is dominant, the capacity is close to that of the continu- ous channel with the same energy and noise levels; when Poisson noise prevails, the capacity is similar to that of a discrete-time Poisson channel, with no ad- ditive noise. An analogy with radiation channels of an arbitrary frequency, for which the quanta of energy are photons, is presented. Additive noise is found to be dominant when frequency is low and, simultaneously, the signal-to-noise ratio lies below a threshold; the value of this threshold is well approximated by the expected number of quanta of additive noise. As for the minimum energy per nat (1 nat is log2 e bits, or about 1.4427 bits), it equals the average energy of the additive noise component for all the stud- ied channel models. A similar result was previously known to hold for two particular cases, namely the discrete-time Gaussian and Poisson channels. An extension of digital modulation methods from the Gaussian channels to the additive energy channel is presented, and their constrained capacity determined. Special attention is paid to their asymptotic form of the capacity at low and high levels of signal energy. In contrast to the behaviour in the vi Gaussian channel, arbitrary modulation formats do not achieve the minimum energy per bit at low signal energy. Analytic expressions for the constrained capacity at low signal energy levels are provided. In the high-energy limit simple pulse-energy modulations, which achieve a larger constrained capacity than their counterparts for the Gaussian channel, are presented. As a ¯nal element, the error probability of binary channel codes in the ad- ditive energy channels is studied by analyzing the pairwise error probability, the probability of wrong decision between two alternative binary codewords. Saddlepoint approximations to the pairwise error probability are given, both for binary modulation and for bit-interleaved coded modulation, a simple and e±cient method to use binary codes with non-binary modulations. The meth- ods yield new simple approximations to the error probability in the fading Gaussian channel. The error rates in the continuous additive energy channel are close to those of coherent transmission at identical signal-to-noise ratio. Constellations minimizing the pairwise error probability in the additive energy channels are presented, and their form compared to that of the constellations which maximize the constrained capacity at high signal energy levels
Average Rate of Downlink Heterogeneous Cellular Networks over Generalized Fading Channels - A Stochastic Geometry Approach
In this paper, we introduce an analytical framework to compute the average
rate of downlink heterogeneous cellular networks. The framework leverages
recent application of stochastic geometry to other-cell interference modeling
and analysis. The heterogeneous cellular network is modeled as the
superposition of many tiers of Base Stations (BSs) having different transmit
power, density, path-loss exponent, fading parameters and distribution, and
unequal biasing for flexible tier association. A long-term averaged maximum
biased-received-power tier association is considered. The positions of the BSs
in each tier are modeled as points of an independent Poisson Point Process
(PPP). Under these assumptions, we introduce a new analytical methodology to
evaluate the average rate, which avoids the computation of the Coverage
Probability (Pcov) and needs only the Moment Generating Function (MGF) of the
aggregate interference at the probe mobile terminal. The distinguishable
characteristic of our analytical methodology consists in providing a tractable
and numerically efficient framework that is applicable to general fading
distributions, including composite fading channels with small- and mid-scale
fluctuations. In addition, our method can efficiently handle correlated
Log-Normal shadowing with little increase of the computational complexity. The
proposed MGF-based approach needs the computation of either a single or a
two-fold numerical integral, thus reducing the complexity of Pcov-based
frameworks, which require, for general fading distributions, the computation of
a four-fold integral.Comment: Accepted for publication in IEEE Transactions on Communications, to
appea
- …