Tolerancing and Sheet Bending in Small Batch Part Manufacturing

Tolerances indicate geometrical limits between which a component is expected to perform its function adequately. They are used for instance for set-up selection in process planning and for inspection. Tolerances must be accounted for in sequencing and positioning procedures for bending of sheet metal parts. In bending, the shape of a part changes not only locally, but globally as well. Therefore, sheet metal part manufacturing presents some specific problems as regards reasoning about tolerances. The paper focuses on the interpretation and conversion of tolerances as part of a sequencing procedure for bending to be used in an integrated CAPP system

Modeling of 2D and 3D Assemblies Taking Into Account Form Errors of Plane Surfaces

The tolerancing process links the virtual and the real worlds. From the former, tolerances define a variational geometrical language (geometric parameters). From the latter, there are values limiting those parameters. The beginning of a tolerancing process is in this duality. As high precision assemblies cannot be analyzed with the assumption that form errors are negligible, we propose to apply this process to assemblies with form errors through a new way of allowing to parameterize forms and solve their assemblies. The assembly process is calculated through a method of allowing to solve the 3D assemblies of pairs of surfaces having form errors using a static equilibrium. We have built a geometrical model based on the modal shapes of the ideal surface. We compute for the completely deterministic contact points between this pair of shapes according to a given assembly process. The solution gives an accurate evaluation of the assembly performance. Then we compare the results with or without taking into account the form errors. When we analyze a batch of assemblies, the problem is to compute for the nonconformity rate of a pilot production according to the functional requirements. We input probable errors of surfaces (position, orientation, and form) in our calculus and we evaluate the quality of the results compared with the functional requirements. The pilot production then can or cannot be validated

Computer aided inspection procedures to support smart manufacturing of injection moulded components

This work presents Reverse Engineering and Computer Aided technologies to improve the inspection of injection moulded electro-mechanical parts. Through a strong integration and automation of these methods, tolerance analysis, acquisition tool-path optimization and data management are performed. The core of the procedure concerns the automation of the data measure originally developed through voxel-based segmentation. This paper discusses the overall framework and its integration made according to Smart Manufacturing requirements. The experimental set-up, now in operative conditions at ABB SACE, is composed of a laser scanner installed on a CMM machine able to measure components with lengths in the range of 5÷250 mm, (b) a tool path optimization procedure and (c) a data management both developed as CAD-based applications

Review of research in feature-based design

Research in feature-based design is reviewed. Feature-based design is regarded as a key factor towards CAD/CAPP integration from a process planning point of view. From a design point of view, feature-based design offers possibilities for supporting the design process better than current CAD systems do. The evolution of feature definitions is briefly discussed. Features and their role in the design process and as representatives of design-objects and design-object knowledge are discussed. The main research issues related to feature-based design are outlined. These are: feature representation, features and tolerances, feature validation, multiple viewpoints towards features, features and standardization, and features and languages. An overview of some academic feature-based design systems is provided. Future research issues in feature-based design are outlined. The conclusion is that feature-based design is still in its infancy, and that more research is needed for a better support of the design process and better integration with manufacturing, although major advances have already been made

Virtual manufacturing: prediction of work piece geometric quality by considering machine and set-up

Lien vers la version éditeur: http://www.tandfonline.com/doi/full/10.1080/0951192X.2011.569952#.U4yZIHeqP3UIn the context of concurrent engineering, the design of the parts, the production planning and the manufacturing facility must be considered simultaneously. The design and development cycle can thus be reduced as manufacturing constraints are taken into account as early as possible. Thus, the design phase takes into account the manufacturing constraints as the customer requirements; more these constraints must not restrict the creativity of design. Also to facilitate the choice of the most suitable system for a specific process, Virtual Manufacturing is supplemented with developments of numerical computations (Altintas et al. 2005, Bianchi et al. 1996) in order to compare at low cost several solutions developed with several hypothesis without manufacturing of prototypes. In this context, the authors want to predict the work piece geometric more accurately by considering machine defects and work piece set-up, through the use of process simulation. A particular case study based on a 3 axis milling machine will be used here to illustrate the authors’ point of view. This study focuses on the following geometric defects: machine geometric errors, work piece positioning errors due to fixture system and part accuracy

Recent Developments in Tolerancing Techniques

Mechanical tolerances are specified in conjunction with part geometry, material type andother technical specifications during the design of mechanical components and assemblies., These tolerances ensure the expected design function, and provide guidelines for the manufactureof designed parts. However, assigning proper tolerances for a design is a non-trivial task. Thispaper reviews the recent developments in the field of tolerancing techniques, particularly withreference to the use of computers, cost tolerance relationship and tolerance design for qualityimprovement of the product

Estimating the cost of functional requirements for tolerance allocation on mechanical assemblies

When allocating tolerances to geometric features of machine parts, a target variation must be specified for some functional requirements on the assembly. Such decision, however, is usually made from experience without consideration of its effect on manufacturing cost. To allow such an assessment, the paper describes a method for estimating the cost of a requirement as a function of its variation. The estimation can be done before solving a tolerance allocation problem, at the time the variation on the requirement is chosen as an optimization constraint. A simple expression for the cost of requirements of various types is obtained using the extended reciprocal-power function for the cost of part tolerances, and the optimal scaling method for tolerance allocation. As a result, the costs of both requirement variations and part tolerances can be treated in the same way; this allows a hierarchical approach to tolerance allocation, which can simplify the problem when dealing with complex dimension chains. Furthermore, simple calculations based on the proposed method suggest general cost reduction criteria in the design of assemblies

Robust Design of a Fixture Configuration in the Presence of form Deviations

During machining, the tool path is defined with respect to the workpiece reference frame. The workpiece's boundary surfaces have form deviations, and the geometry and the position of the locators are imperfect. The resulting misalignment produces geometrical errors in the features machined on the workpiece. The main purpose of this work is to investigate how the geometric errors of a machined surface are related to the main sources of the locator errors and to the form deviations of the workpiece. A mathematical framework is presented for an analysis of the relationship among the manufacturing errors, the part form deviations, and the locator errors

Towards the automation of product geometric verification: An overview

The paper aims at providing an overview on the current automation level of geometric verification process with reference to some aspects that can be considered crucial to achieve a greater efficiency, accuracy and repeatability of the inspection process. Although we are still far from making this process completely automatic, several researches were made in recent years to support and speed up the geometric error evaluation and to make it less human-intensive. The paper, in particular, surveys: (1) models of specification developed for an integrated approach to tolerancing; (2) state of the art of Computer-Aided Inspection Planning (CAIP); (3) research efforts recently made for limiting or eliminating the human contribution during the data processing aimed at geometric error evaluation. Possible future perspectives of the research on the automation of geometric verification process are finally described