ToScA North America (6 – 8 June 2017, The University of Texas, Austin, TX) Program

ToScA North America will address key areas of science, including Multi-modal Imaging, Geosciences, Forensics, Increasing Contrast, Educational Outreach, Data, Materials Science and Medical and Biological Science.University of Texas High-Resolution X-ray CT Facility (UTCT); Jackson School of Geosciences, The University of Texas at Austin; Natural History Museum (London); Royal Microscopical Society (Oxford, UK)Geological Science

Talbot-Lau x-ray phase-contrast setup for fast scanning of large samples

Abstract Compared to conventional attenuation x-ray radiographic imaging, the x-ray Talbot-Lau technique provides further information about the scattering and the refractive properties of the object in the beam path. Hence, this additional information should improve the diagnostic process concerning medical applications and non-destructive testing. Nevertheless, until now, due to grating fabrication process, Talbot-Lau imaging suffers from small grating sizes (70 mm diameter). This leads to long acquisition times for imaging large objects. Stitching the gratings is one solution. Another one consists of scanning Talbot-Lau setups. In this publication, we present a compact and very fast scanning setup which enables imaging of large samples. With this setup a maximal scanning velocity of 71.7 mm/s is possible. A resolution of 4.1 lines/mm can be achieved. No complex alignment procedures are necessary while the field of view comprises 17.5 × 150 cm2. An improved reconstruction algorithm concerning the scanning approach, which increases robustness with respect to mechanical instabilities, has been developed and is presented. The resolution of the setup in dependence of the scanning velocity is evaluated. The setup imaging qualities are demonstrated using a human knee ex-vivo as an example for a high absorbing human sample

Noise Reduction for Single-Shot Grating-Based Phase-Contrast Imaging at an X-ray Backlighter

X-ray backlighters allow the capture of sharp images of fast dynamic processes due to extremely short exposure times. Moiré imaging enables simultaneously measuring the absorption and differential phase-contrast (DPC) of these processes. Acquiring images with one single shot limits the X-ray photon flux, which can result in noisy images. Increasing the photon statistics by repeating the experiment to gain the same image is not possible if the investigated processes are dynamic and chaotic. Furthermore, to reconstruct the DPC and transmission image, an additional measurement captured in absence of the object is required. For these reference measurements, shot-to-shot fluctuations in X-ray spectra and a source position complicate the averaging of several reference images for noise reduction. Here, two approaches of processing multiple reference images in combination with one single object image are evaluated regarding the image quality. We found that with only five reference images, the contrast-to-noise ratio can be improved by approximately 13% in the DPC image. This promises improvements for short-exposure single-shot acquisitions of rapid processes, such as laser-produced plasma shock-waves in high-energy density experiments at backlighter X-ray sources such as the PHELIX high-power laser facility

X-ray Phase Contrast Tomography : Setup and Scintillator Development

X-ray microscopy and micro-tomography (μCT) are valuable non-destructive examination methods in many disciplines such as bio-medical research, archaeometry, material science and paleontology. Besides being implemented at synchrotrons radiation sources, laboratory setups using an X-ray tube and high-resolution scintillation detector routinely provide information on the micrometre scale. To improve the image contrast for small and low-density samples, it is possible to introduce a propagation distance between sample and detector to perform propagation-based phase contrast imaging (PB-PCI). This contrast mode relies on a sufficiently coherent illumination and is characterised by the appearance of an additional intensity modulations (‘edge enhancement fringes’) around interfaces in the image. The strength of this effect depends on hardware as well as geometry parameters. This thesis describes the development of a laboratory setup for X-ray μCT with a PB-PCI option. It contains the theoretical and technical background of the setup design as well the characterization of the achieved performance.Moreover, the optimization of the PB-PCI geometry was explored both theoretically as well as experimentally for three different setups. A simple rule for finding the optimal magnification to achieve high phase contrast for edge features was deduced. The effect of the polychromatic source spectrum und detector sensitivity was identified and included into the theoretical model.Besides application and methodological studies, the setup was used to test and characterise new X-ray scintillator materials. Recently, metal halide perovskite nanocrystals (MHP NCs) have gained attention due to their outstanding opto-electronic performance. The main challenge for their use and commercialization is their low long-term stability against humidity, temperature, and light exposure. Here, a CsPbBr3 scintillator comprised of an ordered array of nanowires (NW) in an anodized aluminium oxide (AAO) membrane is presented as a promising new scintillator for X-ray microscopy and μCT. It shows a high light yield under X-ray exposure which improves with smaller NW diameter and higher NW length. In contrast to many other MHP materials this scintillator shows good stability under continuous X-ray exposure and changing environmental conditions over extended time spans of several weeks. This makes it suitable for tomography, which is demonstrated by acquiring the first high-resolution tomogram using a MHP scintillator with the presented laboratory setup

Aiding the conservation of two wooden Buddhist sculptures with 3D imaging and spectroscopic techniques

The conservation of Buddhist sculptures that were transferred to Europe at some point during their lifetime raises numerous questions: while these objects historically served a religious, devotional purpose, many of them currently belong to museums or private collections, where they are detached from their original context and often adapted to western taste. A scientific study was carried out to address questions from Museo d'Arte Orientale of Turin curators in terms of whether these artifacts might be forgeries or replicas, and how they may have transformed over time. Several analytical techniques were used for materials identification and to study the production technique, ultimately aiming to discriminate the original materials from those added within later interventions

Development of an x-ray excited optical luminescence microscope (XEOM)

X-ray excited optical luminescence (XEOL) refers to the trans-visible emission produced as a consequence of X-ray bombardment and provides an alternative detection method for X-ray absorption spectroscopy (XAS). Whereas XAS measured by conventional means (absorption, X-ray fluorescence) generally yields spectra characteristic of the bulk, the shallow escape depth of visible photons provides surface specificity of ~ 200 nm. Combining this with the relative ease of manipulating the emission using conventional optics gives us the basis for a method of mapping surface chemical states on the micron scale — XEOL microscopy (XEOM). As part of an ongoing project looking into the use of XEOL to study the chemical systems relevant to the corrosion of heritage artefacts, a portable XEOM instrument, XEOM1, has been constructed. Here, a detailed account of the development process is given, including descriptions of the microscope itself (optics, detectors, auxiliary hardware) and of its support system (control electronics and software). Data processing challenges are also discussed. Testing of XEOM1 has involved deployment on multiple synchrotron beamlines and data acquired from samples comprising of corroded copper surfaces (coupons, meshes) are presented in order to demonstrate how XEOM1 can be used for surface chemical analysis. XEOL spectra have been obtained by acquiring image 'stacks' — each stack is sequence of images resolved in energy across an absorption edge — and extracting data from regions of interest (ROIs) in each image. Chemical identification is achieved through analysis of the nearedge structure (XANES). Subtraction of pre- and post-edge images also gives a method for fast elemental mapping. Several options for future development of the XEOM1 hardware and related investigations are also proposed

Analytical approach to diagnose the influence of the burial environment on the conservation state of archaeological remains: From lithic to metallic objects

392 p