Indoor wireless communications and applications

Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter

WiFi Access Points Line-of-Sight Detection for Indoor Positioning Using the Signal Round Trip Time

The emerging WiFi Round Trip Time measured by the IEEE 802.11mc standard promised sub-meter-level accuracy for WiFi-based indoor positioning systems, under the assumption of an ideal line-of-sight path to the user. However, most workplaces with furniture and complex interiors cause the wireless signals to reflect, attenuate, and diffract in different directions. Therefore, detecting the non-line-of-sight condition of WiFi Access Points is crucial for enhancing the performance of indoor positioning systems. To this end, we propose a novel feature selection algorithm for non-line-of-sight identification of the WiFi Access Points. Using the WiFi Received Signal Strength and Round Trip Time as inputs, our algorithm employs multi-scale selection and Machine Learning-based weighting methods to choose the most optimal feature sets. We evaluate the algorithm on a complex campus WiFi dataset to demonstrate a detection accuracy of 93% for all 13 Access Points using 34 out of 130 features and only 3 s of test samples at any given time. For individual Access Point line-of-sight identification, our algorithm achieved an accuracy of up to 98%. Finally, we make the dataset available publicly for further research

Improved NLOS Error Mitigation Based on LTS Algorithm

A new improved Least Trimmed Squares (LTS) based algorithm for Non-line-of sight (NLOS) error mitigation is proposed for indoor localisation systems. The conventional LTS algorithm has hard threshold to decide the final set of base stations (BSs) to be used in position calculations. When the number of Line of Sight (LOS) base stations is more than the number of NLOS BSs the conventional LTS algorithm does not include some of them in position estimation due to principle of LTS algorithm or under heavy NLOS environments it cannot separate least biased BSs to use. To improve the performance of the conventional LTS algorithm in dynamic environments we have proposed a method that selects BSs for position calculation based on ordered residuals without discarding half of the BSs. By choosing a set of BSs which have least residual errors among all combinations as a final set for position calculation, we were able to decrease the localisation error of the system in dynamic environments. We demonstrate the robustness of the new improved method based on computer simulations under realistic channel environments

Real-Time Localization Using Software Defined Radio

Service providers make use of cost-effective wireless solutions to identify, localize, and possibly track users using their carried MDs to support added services, such as geo-advertisement, security, and management. Indoor and outdoor hotspot areas play a significant role for such services. However, GPS does not work in many of these areas. To solve this problem, service providers leverage available indoor radio technologies, such as WiFi, GSM, and LTE, to identify and localize users. We focus our research on passive services provided by third parties, which are responsible for (i) data acquisition and (ii) processing, and network-based services, where (i) and (ii) are done inside the serving network. For better understanding of parameters that affect indoor localization, we investigate several factors that affect indoor signal propagation for both Bluetooth and WiFi technologies. For GSM-based passive services, we developed first a data acquisition module: a GSM receiver that can overhear GSM uplink messages transmitted by MDs while being invisible. A set of optimizations were made for the receiver components to support wideband capturing of the GSM spectrum while operating in real-time. Processing the wide-spectrum of the GSM is possible using a proposed distributed processing approach over an IP network. Then, to overcome the lack of information about tracked devices’ radio settings, we developed two novel localization algorithms that rely on proximity-based solutions to estimate in real environments devices’ locations. Given the challenging indoor environment on radio signals, such as NLOS reception and multipath propagation, we developed an original algorithm to detect and remove contaminated radio signals before being fed to the localization algorithm. To improve the localization algorithm, we extended our work with a hybrid based approach that uses both WiFi and GSM interfaces to localize users. For network-based services, we used a software implementation of a LTE base station to develop our algorithms, which characterize the indoor environment before applying the localization algorithm. Experiments were conducted without any special hardware, any prior knowledge of the indoor layout or any offline calibration of the system

Location-Enabled IoT (LE-IoT): A Survey of Positioning Techniques, Error Sources, and Mitigation

The Internet of Things (IoT) has started to empower the future of many industrial and mass-market applications. Localization techniques are becoming key to add location context to IoT data without human perception and intervention. Meanwhile, the newly-emerged Low-Power Wide-Area Network (LPWAN) technologies have advantages such as long-range, low power consumption, low cost, massive connections, and the capability for communication in both indoor and outdoor areas. These features make LPWAN signals strong candidates for mass-market localization applications. However, there are various error sources that have limited localization performance by using such IoT signals. This paper reviews the IoT localization system through the following sequence: IoT localization system review -- localization data sources -- localization algorithms -- localization error sources and mitigation -- localization performance evaluation. Compared to the related surveys, this paper has a more comprehensive and state-of-the-art review on IoT localization methods, an original review on IoT localization error sources and mitigation, an original review on IoT localization performance evaluation, and a more comprehensive review of IoT localization applications, opportunities, and challenges. Thus, this survey provides comprehensive guidance for peers who are interested in enabling localization ability in the existing IoT systems, using IoT systems for localization, or integrating IoT signals with the existing localization sensors

Indoor Localisation of Scooters from Ubiquitous Cost-Effective Sensors: Combining Wi-Fi, Smartphone and Wheel Encoders

Indoor localisation of people and objects has been a focus of research studies for several decades because of its great advantage to several applications. Accuracy has always been a challenge because of the uncertainty of the employed sensors. Several technologies have been proposed and researched, however, accuracy still represents an issue. Today, several sensor technologies can be found in indoor environments, some of which are economical and powerful, such as Wi-Fi. Meanwhile, Smartphones are typically present indoors because of the people that carry them along, while moving about within rooms and buildings. Furthermore, vehicles such as mobility scooters can also be present indoor to support people with mobility impairments, which may be equipped with low-cost sensors, such as wheel encoders. This thesis investigates the localisation of mobility scooters operating indoor. This represents a specific topic as most of today's indoor localisation systems are for pedestrians. Furthermore, accurate indoor localisation of those scooters is challenging because of the type of motion and specific behaviour. The thesis focuses on improving localisation accuracy for mobility scooters and on the use of already available indoor sensors. It proposes a combined use of Wi-Fi, Smartphone IMU and wheel encoders, which represents a cost-effective energy-efficient solution. A method has been devised and a system has been developed, which has been experimented on different environment settings. The outcome of the experiments are presented and carefully analysed in the thesis. The outcome of several trials demonstrates the potential of the proposed solutions in reducing positional errors significantly when compared to the state-of-the-art in the same area. The proposed combination demonstrated an error range of 0.35m - 1.35m, which can be acceptable in several applications, such as some related to assisted living. 3 As the proposed system capitalizes on the use of ubiquitous technologies, it opens up to a potential quick take up from the market, therefore being of great benefit for the target audience

A Localization System for Optimizing the Deployment of Small Cells in 2-Tier Heterogeneous Wireless Networks

Due to the ever growing population of mobile device users and expansion on the number of devices and applications requiring data usage, there is an increasing demand for improved capacity in wireless cellular networks. Cell densification and 2-tier heterogeneous networks (HetNets) are two solutions which will assist 5G systems in meeting these growing capacity demands. Small-cell deployment over existing heterogeneous networks have been considered by researchers. Different strategies for deploying these small-cells within the existing network among which are random, cell-edge and high user concentration (HUC) have also been explored. Small cells deployed on locations of HUC offloads traffic from existing network infrastructure, ensure good Quality of Service (QoS) and balanced load in the network but there is a challenge of identifying HUC locations. There has been considerable research performed into techniques for determining user location and cell deployment. Currently localization can be achieved using time dependent methods such as Time of Arrival (ToA), Time Difference of Arrival (TDoA), or Global Positioning Systems (GPS). GPS based solutions provide high accuracy user positioning but suffer from concerns over user privacy, and other time dependent approaches require regular synchronization which can be difficult to achieve in practice. Alternatively, Received Signal Strength (RSS) based solutions can provide simple anonymous user data, requiring no extra hardware within the mobile handset but often rely on triangulation from adjacent Base Stations (BS). In mobile cellular networks such solutions are therefore often only applicable near the cell edge, as installing additional BS would increase the complexity and cost of a network deployment. The work presented in this thesis overcomes these limitations by providing an observer system for wireless networks that can be used to periodically monitor the cell coverage area and identify regions of high concentrations of users for possible small cell deployment in 2-tier heterogeneous networks. The observer system comprises of two collinear antennas separated by λ/2. The relative phase of each antenna was varied using a phase shifter so that the combined output of the two antennas were used to create sum and difference radiation patterns, and to steer the antenna radiation pattern creating different azimuth positions for AoA estimation. Statistical regression analysis was used to develop range estimation models based on four different environment empirical pathloss models for user range estimation. Users were located into clusters by classifying them into azimuth-range classes and counting the number of users in each class. Locations for small cell deployment were identified based on class population. BPEM, ADEM, BUEM, EARM and NLOS models were developed for more accurate range estimation. A prototype system was implemented and tested both outdoor and indoor using a network of WiFi nodes. Experimental results show close relationship with simulation and an average PER in range estimation error of 80% by applying developed error models. Based on both simulation and experiment, system showed good performance. By deploying micro-, pico-, or femto-cells in areas of higher user concentration, high data rates and good quality of service in the network can be maintained. The observer system provides the network manager with relative angle of arrival (AoA), distance estimation and relative location of user clusters within the cell. The observer system divides the cell into a series of azimuthal and range sectors, and determines which sector the users are located in. Simulation and a prototype design of the system is presented and results have shown system robustness and high accuracy for its purpose