412 research outputs found
Wireless industrial monitoring and control networks: the journey so far and the road ahead
While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks
COMMUNICATION IN SMART GRIDS USING LTE
The world today is focusing on the enhancement of efficient use of energy and it has compelled the energy industry to research and seek for measures for increasing energy efficiency. Out of various fields related to energy, Smart Grid has emerged itself as one of the effective contributor to fulfill the approach of efficient use of energy. The term smart grid has been evolved from power grid where the energy is generated, distributed and finally consumed by a consumer. The smart form of this power grid is actually smart grid which facilitates smart way of communication of smart devices between grids, so that the effective mode of controlling and monitoring can be achieved. In order to achieve this, the devices should be smart enough so that they can be interoperable and remotely accessed. For the smart devices to communicate in real time so that controlling and remote access becomes possible, it demands an advanced communicating medium.
LTE is one of the most challenging, famous and widely adopted communication technology that meets the requirement imposed by broadband wireless mobile communications. Early tests, evaluations and their pre-commercial deployments have proved that they fulfil all the requirements like high-data-rate, low latency and optimized system that advanced communication demands.
Thus, this paper focuses on the evaluation of integration of LTE in Smart Grids so that automation in Smart Grids can be achieved.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format
Recommended from our members
Understanding the characteristics of Internet traffic and designing an efficient RaptorQ-based data transport protocol for modern data centres
This thesis is the amalgamation of research on efficient data transport protocols for data centres and a comprehensive and systematic study of Internet traffic, which came as a result of the need to understand traffic patterns and workloads in modern computer networks.
The first part of the thesis is on the development of efficient data transport pro- tocols for data centres. We study modern data transport protocols for data centres through large scale simulations using the OMNeT++ simulator. We developed and experimented with an OMNeT++ model of NDP. This has led to the identification of limitations of the state of the art and the formulation of research questions with respect to data transport protocols for modern data centres. The developed model includes an implementation of a Fat-tree topology and per-packet ECMP load bal- ancing. We discuss how we integrated the model with the INET Framework and validated it by running various experiments that test different model parameters and components. This work revealed limitations of NDP with respect to efficient one-to-many and many-to-one communication in data centres, which led to the de- velopment of SCDP, a novel and general-purpose data transport protocol for data centres that, in contrast to all other protocols proposed to date, natively supports one-to-many and many-to-one data communication, which is extremely common in modern data centres. SCDP does so without compromising on efficiency for short and long unicast flows. SCDP achieves this by integrating RaptorQ codes with receiver-driven data transport, in-network packet trimming and Multi-Level Feed- back Queuing (MLFQ); (1) RaptorQ codes enable efficient one-to-many and many- to-one data transport; (2) on top of RaptorQ codes, receiver- driven flow control, in combination with in-network packet trimming, enable efficient usage of network re- sources as well as multi-path transport and packet spraying for all transport modes. Incast and Outcast are eliminated; (3) the systematic nature of RaptorQ codes, in combination with MLFQ, enable fast, decoding-free completion of short flows. We extensively evaluated SCDP in a wide range of simulated scenarios with realistic data centre workloads. For one-to-many and many-to-one transport sessions, SCDP performs significantly better than NDP. For short and long unicast flows, SCDP performs equally well or better compared to NDP.
In the second part of the thesis, we extensively study Internet traffic. Getting good statistical models of traffic on network links is a well-known, often-studied problem. A lot of attention has been given to correlation patterns and flow duration. The distribution of the amount of traffic per unit time is an equally important but less studied problem. We study a large number of traffic traces from many different networks including academic, commercial and residential networks using state-of-the-art statistical techniques. We show that the log-normal distribution is a better fit than the Gaussian distribution. We also investigate a second, heavy- tailed distribution and show that its performance is better than Gaussian but worse than log-normal. We examine anomalous traces which are a poor fit for all tested distributions and show that this is often due to traffic outages or links that hit maximum capacity. Stationarity tests showed that the traffic is stationary at some range of aggregation times. We demonstrate the utility of the log-normal distribution in two contexts: predicting the proportion of time traffic will exceed a given level (for link capacity estimation) and predicting 95th percentile pricing. We also show the log-normal distribution is a better predictor than Gaussian orWeibull distributions
Reducing Internet Latency : A Survey of Techniques and their Merit
Bob Briscoe, Anna Brunstrom, Andreas Petlund, David Hayes, David Ros, Ing-Jyh Tsang, Stein Gjessing, Gorry Fairhurst, Carsten Griwodz, Michael WelzlPeer reviewedPreprin
IETF standardization in the field of the Internet of Things (IoT): a survey
Smart embedded objects will become an important part of what is called the Internet of Things. However, the integration of embedded devices into the Internet introduces several challenges, since many of the existing Internet technologies and protocols were not designed for this class of devices. In the past few years, there have been many efforts to enable the extension of Internet technologies to constrained devices. Initially, this resulted in proprietary protocols and architectures. Later, the integration of constrained devices into the Internet was embraced by IETF, moving towards standardized IP-based protocols. In this paper, we will briefly review the history of integrating constrained devices into the Internet, followed by an extensive overview of IETF standardization work in the 6LoWPAN, ROLL and CoRE working groups. This is complemented with a broad overview of related research results that illustrate how this work can be extended or used to tackle other problems and with a discussion on open issues and challenges. As such the aim of this paper is twofold: apart from giving readers solid insights in IETF standardization work on the Internet of Things, it also aims to encourage readers to further explore the world of Internet-connected objects, pointing to future research opportunities
Evaluation of on-demand routing in mobile ad hoc networks and proposal for a secure routing protocol
Secure routing Mobile Ad hoc Networks (MANETs) has emerged as an important MANET research area. Initial work in MANET focused mainly on the problem of providing efficient mechanisms for finding paths in very dynamic networks, without considering the security of the routing process. Because of this, a number of attacks exploit these routing vulnerabilities to manipulate MANETs. In this thesis, we performed an in-depth evaluation and performance analysis of existing MANET Routing protocols, identifying Dynamic Source Routing (DSR) as the most robust (based on throughput, latency and routing overhead) which can be secured with negligible routing efficiency trade-off. We describe security threats, specifically showing their effects on DSR. We proposed a new routing protocol, named Authenticated Source Routing for Ad hoc Networks (ASRAN) which is an out-of-band certification-based, authenticated source routing protocol with modifications to the route acquisition process of DSR to defeat all identified attacks. Simulation studies confirm that ASRAN has a good trade-off balance in reference to the addition of security and routing efficiency
- …