Rapid Convergecast on Commodity Hardware: Performance Limits and Optimal Policies

ReSensePromo

Wireless industrial monitoring and control networks: the journey so far and the road ahead

While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks

Alternate marking-based network telemetry for industrial WSNs

For continuous, persistent and problem-free operation of Industrial Wireless Sensor Networks (IWSN), it is critical to have visibility and awareness into what is happening on the network at any one time. Especially, for the use cases with strong needs for deterministic and real-time network services with latency and reliability guarantees, it is vital to monitor network devices continuously to guarantee their functioning, detect and isolate relevant problems and verify if all system requirements are being met simultaneously. In this context, this article investigates a light-weight telemetry solution for IWSNs, which enables the collection of accurate and continuous flowbased telemetry information, while adding no overhead on the monitored packets. The proposed monitoring solution adopts the recent Alternate Marking Performance Monitoring (AMPM) concept and mainly targets measuring end-to-end and hopby-hop reliability and delay performance in critical application flows. Besides, the technical capabilities and characteristics of the proposed solution are evaluated via a real-life implementation and practical experiments, validating its suitability for IWSNs

Real-Time and Energy-Efficient Routing for Industrial Wireless Sensor-Actuator Networks

With the emergence of industrial standards such as WirelessHART, process industries are adopting Wireless Sensor-Actuator Networks (WSANs) that enable sensors and actuators to communicate through low-power wireless mesh networks. Industrial monitoring and control applications require real-time communication among sensors, controllers and actuators within end-to-end deadlines. Deadline misses may lead to production inefficiency, equipment destruction to irreparable financial and environmental impacts. Moreover, due to the large geographic area and harsh conditions of many industrial plants, it is labor-intensive or dan- gerous to change batteries of field devices. It is therefore important to achieve long network lifetime with battery-powered devices. This dissertation tackles these challenges and make a series of contributions. (1) We present a new end-to-end delay analysis for feedback control loops whose transmissions are scheduled based on the Earliest Deadline First policy. (2) We propose a new real-time routing algorithm that increases the real-time capacity of WSANs by exploiting the insights of the delay analysis. (3) We develop an energy-efficient routing algorithm to improve the network lifetime while maintaining path diversity for reliable communication. (4) Finally, we design a distributed game-theoretic algorithm to allocate sensing applications with near-optimal quality of sensing

D-SAR: A Distributed Scheduling Algorithm for Real-time, Closed-Loop Control in Industrial Wireless Sensor and Actuator Networks

Current wireless standards and protocols for industrial applications such as WirelessHART and ISA100.11a typically use centralized network management techniques for communication scheduling and route establishment. However, large-scale centralized systems can have several drawbacks. They have difficulty in coping with disturbances or changes within the network in real-time. Large-scale centralized systems can also have highly variable latencies thus making them unsuitable for closed-loop control applications. To address these problems, this paper describes D-SAR, a distributed resource reservation algorithm which would allow source nodes to meet the Quality-of-Service (QoS) requirements of the application in real-time, when carrying out peer-to-peer communication. The presented solution uses concepts derived from relevant networking-related domains such as circuit switching and Asynchronous Transfer Mode (ATM) networks and applies them to wireless sensor and actuator networks

The Bus Goes Wireless: Routing-Free Data Collection with QoS Guarantees in Sensor Networks

Abstract—We present the low-power wireless bus (LWB), a new communication paradigm for QoS-aware data collection in lowpower sensor networks. The LWB maps all communication onto network floods by using Glossy, an efficient flooding architecture for wireless sensor networks. Therefore, unlike current solutions, the LWB requires no information of the network topology, and inherently supports networks with mobile nodes and multiple data sinks. A LWB prototype implemented in Contiki guarantees bounded end-to-end communication delay and duplicate-free, inorder packet delivery—key QoS requirements in many control and mission-critical applications. Experiments on two testbeds demonstrate that the LWB prototype outperforms state-of-theart data collection and link layer protocols, in terms of reliability and energy efficiency. For instance, we measure an average radio duty cycle of 1.69 % and an overall data yield of 99.97 % in a typical data collection scenario with 85 sensor nodes on Twist. I

End-to-End Delay Analysis for Fixed Priority Scheduling in WirelessHART Networks

The WirelessHART standard has been specifically designed for real-time communication between sensor and actuator devices for industrial process monitoring and control. End-to-end communication delay analysis for WirelessHART networks is required for acceptance test of real-time data flows from sensors to actuators and for workload adjustment in response to network dynamics. In this paper, we map the scheduling of real-time periodic data flows in a WirelessHART network to real-time multiprocessor scheduling. We, then, exploit the response time analysis for multiprocessor scheduling and propose a novel method for the end-to-end delay analysis of the real-time flows that are scheduled using a fixed priority scheduling policy in a WirelessHART network. Simulations based on both random topologies and real network topologies of a physical testbed demonstrate the efficacy of our end-to-end delay analysis in terms of acceptance ratio under various fixed priority scheduling policies

Accounting for Failures in Delay Analysis for WirelessHART Networks

WirelessHART networks are gaining ground as a real-time communication infrastructure in industrial wireless control systems. Because wireless communication is often susceptible to transmission failures in industrial environments, it is essential to account for failures in the delay analysis for realtime flows between sensors and actuators in process control. WirelessHART networks handle transmission failures through retransmissions using dedicated and shared time slots through different paths in the routing graphs. While these mechanisms for handling transmission failures are critical for process control requiring reliable communication, they introduce substantial challenges to worst-case end-to-end delay analysis for real-time flows. This paper presents the first worst-case end-to-end delay analysis for periodic real-time flows in a WirelessHART network that takes into account transmission failures. The delay bounds can be used to quickly assess the schedulability of real-time flows for industrial wireless control applications with stringent requirements on both high reliability and network latency. Simulations based on the topologies of a wireless sensor network testbed consisting of 69 TelosB motes indicate that our analysis provides safe upper bounds of the end-to-end delays of real-time flows at an acceptable level of pessimism