High-Performance Energy-Efficient and Reliable Design of Spin-Transfer Torque Magnetic Memory

In this dissertation new computing paradigms, architectures and design philosophy are proposed and evaluated for adopting the STT-MRAM technology as highly reliable, energy efficient and fast memory. For this purpose, a novel cross-layer framework from the cell-level all the way up to the system- and application-level has been developed. In these framework, the reliability issues are modeled accurately with appropriate fault models at different abstraction levels in order to analyze the overall failure rates of the entire memory and its Mean Time To Failure (MTTF) along with considering the temperature and process variation effects. Design-time, compile-time and run-time solutions have been provided to address the challenges associated with STT-MRAM. The effectiveness of the proposed solutions is demonstrated in extensive experiments that show significant improvements in comparison to state-of-the-art solutions, i.e. lower-power, higher-performance and more reliable STT-MRAM design

A Construction Kit for Efficient Low Power Neural Network Accelerator Designs

Implementing embedded neural network processing at the edge requires efficient hardware acceleration that couples high computational performance with low power consumption. Driven by the rapid evolution of network architectures and their algorithmic features, accelerator designs are constantly updated and improved. To evaluate and compare hardware design choices, designers can refer to a myriad of accelerator implementations in the literature. Surveys provide an overview of these works but are often limited to system-level and benchmark-specific performance metrics, making it difficult to quantitatively compare the individual effect of each utilized optimization technique. This complicates the evaluation of optimizations for new accelerator designs, slowing-down the research progress. This work provides a survey of neural network accelerator optimization approaches that have been used in recent works and reports their individual effects on edge processing performance. It presents the list of optimizations and their quantitative effects as a construction kit, allowing to assess the design choices for each building block separately. Reported optimizations range from up to 10'000x memory savings to 33x energy reductions, providing chip designers an overview of design choices for implementing efficient low power neural network accelerators

Ultra-Low Leakage, Energy-Efficient Digital Integrated Circuit and System Design

The advances of the complementary metal-oxide-semiconductor (CMOS) technology manufacturing and design over the years have enabled a diverse range of applications across the power consumption, performance, and area (PPA) spectra. Many of the recent and prospective applications rely on the availability of energy-autonomous, miniaturized systems, i.e., ultra-low power (ULP) VLSI systems, which are generally characterized by extreme resource limitations. Some examples of applications are wireless sensing platforms, body-area sensor networks (BASN), biomedical and implantable devices, wearables, hearables, and monitors. Within the context of such applications, the key requirements are long lifetime and miniaturized size (sub-/millimeter-scale). In order to enable both requirements, energy-efficiency is the key metric. It allows for extended battery lifetime and operation with the energy that can be harvested from the environment, and it limits the size (volume) of the energy sources utilized to power these systems. Ultra-low voltage (ULV) operation is a key technique in which the VDD of circuits is reduced from nominal to near or below the threshold voltage of the transistor. It is a powerful knob that has been largely exploited by designers in order to achieve ultra-low power consumption and high energy-efficiency in CMOS. Existing ULP VLSI systems typically operate at a lower supply voltage thereby reducing their energy consumption by one to two orders of magnitude in order to enable the aforementioned applications. While supply voltage scaling is a promising measure for achieving low power and reducing energy consumption, it brings up several challenges. One critical issue is the leakage energy dissipated by the devices, which is magnified in portion to the total energy consumption at ULV. The reason is that, as VDD scales from nominal to near-threshold and sub-threshold, transistors become increasingly slower and they accumulate more leakage (i.e., static) power over longer cycle times. This energy waste accounts for a significant portion of the system's total energy consumption, offsets the gains provided by voltage scaling, defines the minimum energy per operation, and poses a practical limit for the system's energy-efficiency. This thesis presents selected research works on ultra-low leakage, energy-efficient digital integrated circuit design. More specifically, it describes novel and key techniques for minimizing the energy waste of idle/underutilized and always-on hardware. The main goal of such techniques is to push the envelope of energy-efficiency in energy-autonomous, miniaturized VLSI systems. Such techniques are applied to key building blocks of emerging mobile and embedded computing devices resulting in state-of-the-art energy-efficiencies

The Thermal-Constrained Real-Time Systems Design on Multi-Core Platforms -- An Analytical Approach

Over the past decades, the shrinking transistor size enabled more transistors to be integrated into an IC chip, to achieve higher and higher computing performances. However, the semiconductor industry is now reaching a saturation point of Moore’s Law largely due to soaring power consumption and heat dissipation, among other factors. High chip temperature not only significantly increases packing/cooling cost, degrades system performance and reliability, but also increases the energy consumption and even damages the chip permanently. Although designing 2D and even 3D multi-core processors helps to lower the power/thermal barrier for single-core architectures by exploring the thread/process level parallelism, the higher power density and longer heat removal path has made the thermal problem substantially more challenging, surpassing the heat dissipation capability of traditional cooling mechanisms such as cooling fan, heat sink, heat spread, etc., in the design of new generations of computing systems. As a result, dynamic thermal management (DTM), i.e. to control the thermal behavior by dynamically varying computing performance and workload allocation on an IC chip, has been well-recognized as an effective strategy to deal with the thermal challenges. Over the past decades, the shrinking transistor size, benefited from the advancement of IC technology, enabled more transistors to be integrated into an IC chip, to achieve higher and higher computing performances. However, the semiconductor industry is now reaching a saturation point of Moore’s Law largely due to soaring power consumption and heat dissipation, among other factors. High chip temperature not only significantly increases packing/cooling cost, degrades system performance and reliability, but also increases the energy consumption and even damages the chip permanently. Although designing 2D and even 3D multi-core processors helps to lower the power/thermal barrier for single-core architectures by exploring the thread/process level parallelism, the higher power density and longer heat removal path has made the thermal problem substantially more challenging, surpassing the heat dissipation capability of traditional cooling mechanisms such as cooling fan, heat sink, heat spread, etc., in the design of new generations of computing systems. As a result, dynamic thermal management (DTM), i.e. to control the thermal behavior by dynamically varying computing performance and workload allocation on an IC chip, has been well-recognized as an effective strategy to deal with the thermal challenges. Different from many existing DTM heuristics that are based on simple intuitions, we seek to address the thermal problems through a rigorous analytical approach, to achieve the high predictability requirement in real-time system design. In this regard, we have made a number of important contributions. First, we develop a series of lemmas and theorems that are general enough to uncover the fundamental principles and characteristics with regard to the thermal model, peak temperature identification and peak temperature reduction, which are key to thermal-constrained real-time computer system design. Second, we develop a design-time frequency and voltage oscillating approach on multi-core platforms, which can greatly enhance the system throughput and its service capacity. Third, different from the traditional workload balancing approach, we develop a thermal-balancing approach that can substantially improve the energy efficiency and task partitioning feasibility, especially when the system utilization is high or with a tight temperature constraint. The significance of our research is that, not only can our proposed algorithms on throughput maximization and energy conservation outperform existing work significantly as demonstrated in our extensive experimental results, the theoretical results in our research are very general and can greatly benefit other thermal-related research

DESIGN OF EFFICIENT NANOELECTRONIC MEMORY AND CRYPTOGRAPHIC CIRCUITS

This thesis presents the design of Nanoelectronic Memory cell and arrays compatible with molecular switch (nanodevice) electrical characteristics. The proposed transmission gate based CMOL (hybrid CMOS / Molecular) memory cell surmounts the operational difficulties facing previous design. The Control circuitry with improved multiplexer design is introduced in this dissertation. Yield improvement through replacing the defective cell with a free cell can be achieved using a proposed algorithm. Moreover, the proposed memory cell has the same area as the existing CMOL inverter cells allowing easier implementation of both logic and memory circuits on the same chip. An efficient hardware implementation of the SBox from the Advanced Encryption Standard (AES) is presented in this dissertation. Modification of the design was achieved by adding Tri­ state Inverter followed by an Inverter (TII). Simulation results show a reduction in the average power dissipation as well as the time delays. Reduction of supply voltage and using low Vdd in non critical path improved the performance by reducing the energy delay product. Different transistors models with dual threshold voltage (Vt) based on 65nm CMOS technology were applied to the design to achieve further improvement. Keywords: CMOL, CMOL circuits, Nanoscale memory, Control Circuit, AES, SBox, Deep sub-micron CMOS technology, Tri-state Inverter, Low Power SBo

Micro-architecture level low power design for microprocessors

Ph.DDOCTOR OF PHILOSOPH

Design and Code Optimization for Systems with Next-generation Racetrack Memories

With the rise of computationally expensive application domains such as machine learning, genomics, and fluids simulation, the quest for performance and energy-efficient computing has gained unprecedented momentum. The significant increase in computing and memory devices in modern systems has resulted in an unsustainable surge in energy consumption, a substantial portion of which is attributed to the memory system. The scaling of conventional memory technologies and their suitability for the next-generation system is also questionable. This has led to the emergence and rise of nonvolatile memory ( NVM ) technologies. Today, in different development stages, several NVM technologies are competing for their rapid access to the market. Racetrack memory ( RTM ) is one such nonvolatile memory technology that promises SRAM -comparable latency, reduced energy consumption, and unprecedented density compared to other technologies. However, racetrack memory ( RTM ) is sequential in nature, i.e., data in an RTM cell needs to be shifted to an access port before it can be accessed. These shift operations incur performance and energy penalties. An ideal RTM , requiring at most one shift per access, can easily outperform SRAM . However, in the worst-cast shifting scenario, RTM can be an order of magnitude slower than SRAM . This thesis presents an overview of the RTM device physics, its evolution, strengths and challenges, and its application in the memory subsystem. We develop tools that allow the programmability and modeling of RTM -based systems. For shifts minimization, we propose a set of techniques including optimal, near-optimal, and evolutionary algorithms for efficient scalar and instruction placement in RTMs . For array accesses, we explore schedule and layout transformations that eliminate the longer overhead shifts in RTMs . We present an automatic compilation framework that analyzes static control flow programs and transforms the loop traversal order and memory layout to maximize accesses to consecutive RTM locations and minimize shifts. We develop a simulation framework called RTSim that models various RTM parameters and enables accurate architectural level simulation. Finally, to demonstrate the RTM potential in non-Von-Neumann in-memory computing paradigms, we exploit its device attributes to implement logic and arithmetic operations. As a concrete use-case, we implement an entire hyperdimensional computing framework in RTM to accelerate the language recognition problem. Our evaluation shows considerable performance and energy improvements compared to conventional Von-Neumann models and state-of-the-art accelerators

Interconnect and Memory Design for Intelligent Mobile System

Technology scaling has driven the transistor to a smaller area, higher performance and lower power consuming which leads us into the mobile and edge computing era. However, the benefits of technology scaling are diminishing today, as the wire delay and energy scales far behind that of the logics, which makes communication more expensive than computation. Moreover, emerging data centric algorithms like deep learning have a growing demand on SRAM capacity and bandwidth. High access energy and huge leakage of the large on-chip SRAM have become the main limiter of realizing an energy efficient low power smart sensor platform. This thesis presents several architecture and circuit solutions to enable intelligent mobile systems, including voltage scalable interconnect scheme, Compute-In-Memory (CIM), low power memory system from edge deep learning processor and an ultra-low leakage stacked voltage domain SRAM for low power smart image signal processor (ISP). Four prototypes are implemented for demonstration and verification. The first two seek the solutions to the slow and high energy global on-chip interconnect: the first prototype proposes a reconfigurable self-timed regenerator based global interconnect scheme to achieve higher performance and energy-efficiency in wide voltage range, while the second one presents a non Von Neumann architecture, a hybrid in-/near-memory Compute SRAM (CRAM), to address the locality issue. The next two works focus on low-power low-leakage SRAM design for Intelligent sensors. The third prototype is a low power memory design for a deep learning processor with 270KB custom SRAM and Non-Uniform Memory Access architecture. The fourth prototype is an ultra-low leakage SRAM for motion-triggered low power smart imager sensor system with voltage domain stacking and a novel array swapping mechanism. The work presented in this dissertation exploits various optimizations in both architecture level (exploiting temporal and spatial locality) and circuit customization to overcome the main challenges in making extremely energy-efficient battery-powered intelligent mobile devices. The impact of the work is significant in the era of Internet-of-Things (IoT) and the age of AI when the mobile computing systems get ubiquitous, intelligent and longer battery life, powered by these proposed solutions.PHDElectrical and Computer EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/155232/1/jiwang_1.pd

Adaptive Baseband Pro cessing and Configurable Hardware for Wireless Communication

The world of information is literally at one’s fingertips, allowing access to previously unimaginable amounts of data, thanks to advances in wireless communication. The growing demand for high speed data has necessitated theuse of wider bandwidths, and wireless technologies such as Multiple-InputMultiple-Output (MIMO) have been adopted to increase spectral efficiency.These advanced communication technologies require sophisticated signal processing, often leading to higher power consumption and reduced battery life.Therefore, increasing energy efficiency of baseband hardware for MIMO signal processing has become extremely vital. High Quality of Service (QoS)requirements invariably lead to a larger number of computations and a higherpower dissipation. However, recognizing the dynamic nature of the wirelesscommunication medium in which only some channel scenarios require complexsignal processing, and that not all situations call for high data rates, allowsthe use of an adaptive channel aware signal processing strategy to provide adesired QoS. Information such as interference conditions, coherence bandwidthand Signal to Noise Ratio (SNR) can be used to reduce algorithmic computations in favorable channels. Hardware circuits which run these algorithmsneed flexibility and easy reconfigurability to switch between multiple designsfor different parameters. These parameters can be used to tune the operations of different components in a receiver based on feedback from the digitalbaseband. This dissertation focuses on the optimization of digital basebandcircuitry of receivers which use feedback to trade power and performance. Aco-optimization approach, where designs are optimized starting from the algorithmic stage through the hardware architectural stage to the final circuitimplementation is adopted to realize energy efficient digital baseband hardwarefor mobile 4G devices. These concepts are also extended to the next generation5G systems where the energy efficiency of the base station is improved.This work includes six papers that examine digital circuits in MIMO wireless receivers. Several key blocks in these receiver include analog circuits thathave residual non-linearities, leading to signal intermodulation and distortion.Paper-I introduces a digital technique to detect such non-linearities and calibrate analog circuits to improve signal quality. The concept of a digital nonlinearity tuning system developed in Paper-I is implemented and demonstratedin hardware. The performance of this implementation is tested with an analogchannel select filter, and results are presented in Paper-II. MIMO systems suchas the ones used in 4G, may employ QR Decomposition (QRD) processors tosimplify the implementation of tree search based signal detectors. However,the small form factor of the mobile device increases spatial correlation, whichis detrimental to signal multiplexing. Consequently, a QRD processor capableof handling high spatial correlation is presented in Paper-III. The algorithm and hardware implementation are optimized for carrier aggregation, which increases requirements on signal processing throughput, leading to higher powerdissipation. Paper-IV presents a method to perform channel-aware processingwith a simple interpolation strategy to adaptively reduce QRD computationcount. Channel properties such as coherence bandwidth and SNR are used toreduce multiplications by 40% to 80%. These concepts are extended to usetime domain correlation properties, and a full QRD processor for 4G systemsfabricated in 28 nm FD-SOI technology is presented in Paper-V. The designis implemented with a configurable architecture and measurements show thatcircuit tuning results in a highly energy efficient processor, requiring 0.2 nJ to1.3 nJ for each QRD. Finally, these adaptive channel-aware signal processingconcepts are examined in the scope of the next generation of communicationsystems. Massive MIMO systems increase spectral efficiency by using a largenumber of antennas at the base station. Consequently, the signal processingat the base station has a high computational count. Paper-VI presents a configurable detection scheme which reduces this complexity by using techniquessuch as selective user detection and interpolation based signal processing. Hardware is optimized for resource sharing, resulting in a highly reconfigurable andenergy efficient uplink signal detector

AI/ML Algorithms and Applications in VLSI Design and Technology

An evident challenge ahead for the integrated circuit (IC) industry in the nanometer regime is the investigation and development of methods that can reduce the design complexity ensuing from growing process variations and curtail the turnaround time of chip manufacturing. Conventional methodologies employed for such tasks are largely manual; thus, time-consuming and resource-intensive. In contrast, the unique learning strategies of artificial intelligence (AI) provide numerous exciting automated approaches for handling complex and data-intensive tasks in very-large-scale integration (VLSI) design and testing. Employing AI and machine learning (ML) algorithms in VLSI design and manufacturing reduces the time and effort for understanding and processing the data within and across different abstraction levels via automated learning algorithms. It, in turn, improves the IC yield and reduces the manufacturing turnaround time. This paper thoroughly reviews the AI/ML automated approaches introduced in the past towards VLSI design and manufacturing. Moreover, we discuss the scope of AI/ML applications in the future at various abstraction levels to revolutionize the field of VLSI design, aiming for high-speed, highly intelligent, and efficient implementations