FPGA Implementation of a Parameterized Fourier Synthesizer

International audienceField-Programmable Gate Array (FPGA) offers advantages for many applications, particularly where missions are complex and time performance is critical. For small-production digital acoustic synthesizers, FPGA can achieve the above-mentioned tighter system requirements with low total system costs on single chip. In this manuscript, a real-time acoustic synthesizer is implemented using Fourier series algorithm on Altera's Cyclone II FPGA chip. This work emphasizes systematic designs and parallel computations. The proposed system includes a flexible processor and a parallel parameterized acoustic module. On one hand, the Nios II embedded processor, which is relatively low-speed component, is used to generate commands and configure high-speed acoustic module parameters. On the other hand, acoustic module which should require high-speed components contains 4 parallel architectures to gain high-speed simultaneous calculus of 4 independent digital timbres. Every timbre is equivalent to 16 parallel high-precision harmonic channels with 0.3 % frequency error. Experimental results corroborate the fact that a single FPGA chip can achieve complex missions and attain real-time performances

CRoute: a fast high-quality timing-driven connection-based FPGA router

FPGA routing is an important part of physical design as the programmable interconnection network requires the majority of the total silicon area and the connections largely contribute to delay and power. It should also occur with minimum runtime to enable efficient design exploration. In this work we elaborate on the concept of the connection-based routing principle. The algorithm is improved and a timing-driven version is introduced. The router, called CROUTE, is implemented in an easy to adapt FPGA CAD framework written in Java, which is publicly available on GitHub. Quality and runtime are compared to the state-of-the-art router in VPR 7.0.7. Benchmarking is done with the TITAN23 design suite, which consists of large heterogeneous designs targeted to a detailed representation of the Stratix IV FPGA. CROUTE gains in both the total wirelength and maximum clock frequency while reducing the routing runtime. The total wire-length reduces by 11% and the maximum clock frequency increases by 6%. These high-quality results are obtained in 3.4x less routing runtime

HEVC 2D-DCT architectures comparison for FPGA and ASIC implementations

This paper compares ASIC and FPGA implementations of two commonly used architectures for 2-dimensional discrete cosine transform (DCT), the parallel and folded architectures. The DCT has been designed for sizes 4x4, 8x8, and 16x16, and implemented on Silterra 180nm ASIC and Xilinx Kintex Ultrascale FPGA. The objective is to determine suitable low energy architectures to be used as their characteristics greatly differ in terms of cells usage, placement and routing methods on these platforms. The parallel and folded DCT architectures for all three sizes have been designed using Verilog HDL, including the basic serializer-deserializer input and output. Results show that for large size transform of 16x16, ASIC parallel architecture results in roughly 30% less energy compared to folded architecture. As for FPGAs, folded architecture results in roughly 34% less energy compared to parallel architecture. In terms of overall energy consumption between 180nm ASIC and Xilinx Ultrascale, ASIC implementation results in about 58% less energy compared to the FPGA

Dynamic Power Evaluation of LTE Wireless Baseband Processing on FPGA

International audienceMobile networks and user equipments continuously evolve to circumvent the data traffic growth and the increasing number of users. However, the complexity and heterogeneity of such systems (3G, LTE, LTE-A, etc.) makes power one of the most critical metric. In this context, power estimation has become an unavoidable task in the design process. In this paper, a dynamic power estimation methodology for FPGA-based systems is presented. It aims at providing accurate and fast power estimations of an entire system prior to its implementation. It also aims at making design space exploration easier. We introduce an innovative scenario-level in order to facilitate the comparison of domain-specific systems. We show the effectiveness of our approach on several LTE baseband configurations which leads to a low absolute error, compared to classic estimations. It also exhibits a high speed-up factor which is determinant during design space exploration. I. INTRODUCTION Today, the data traffic that is generated on mobile networks continues to grow rapidly. According to [1], global mobile data increases of 69% in 2014 and it will have a compound annual growth rate of 57% from 2014 to 2019. To deal with these issues, mobile networks and user equipments tend to constantly adapt their processing capabilities. Among all possible solutions, a popular example is the LTE standard. The complexity of systems like LTE makes their design and development a challenging task, especially when they are implemented in embedded systems in which specific constraints have to be taken into account (power, size, performance , etc.). The number of parameters that can have an impact over power consumption makes the power estimation even more difficult. As the new technologies clearly enhance the performance in terms of throughput, QoS, it also implies a higher power consumption and more heat dissipation. One of the most popular families of digital circuits in embedded systems are the Field Programmable Gate Arrays (FPGA). These devices represent an attractive technology and make it possible to implement complex systems due to their high density of gates and heterogeneous resources. As compare to ASIC that can achieve better performance [2], FPGAs offer more flexibility. FPGA-based systems can be made of IP (Intellectual Property) which are hardware cores that facilitate design reuse and speed up development time. Their power consumption is generally divided into static and dynamic power. Static power comes from leakage currents whereas dynamic power is generated by the transistors switching activity as soon as the circuit is active