Virtual topology design for optical WDM networks

Master'sMASTER OF ENGINEERIN

Virtualisation and resource allocation in MECEnabled metro optical networks

The appearance of new network services and the ever-increasing network traffic and number of connected devices will push the evolution of current communication networks towards the Future Internet. In the area of optical networks, wavelength routed optical networks (WRONs) are evolving to elastic optical networks (EONs) in which, thanks to the use of OFDM or Nyquist WDM, it is possible to create super-channels with custom-size bandwidth. The basic element in these networks is the lightpath, i.e., all-optical circuits between two network nodes. The establishment of lightpaths requires the selection of the route that they will follow and the portion of the spectrum to be used in order to carry the requested traffic from the source to the destination node. That problem is known as the routing and spectrum assignment (RSA) problem, and new algorithms must be proposed to address this design problem. Some early studies on elastic optical networks studied gridless scenarios, in which a slice of spectrum of variable size is assigned to a request. However, the most common approach to the spectrum allocation is to divide the spectrum into slots of fixed width and allocate multiple, consecutive spectrum slots to each lightpath, depending on the requested bandwidth. Moreover, EONs also allow the proposal of more flexible routing and spectrum assignment techniques, like the split-spectrum approach in which the request is divided into multiple "sub-lightpaths". In this thesis, four RSA algorithms are proposed combining two different levels of flexibility with the well-known k-shortest paths and first fit heuristics. After comparing the performance of those methods, a novel spectrum assignment technique, Best Gap, is proposed to overcome the inefficiencies emerged when combining the first fit heuristic with highly flexible networks. A simulation study is presented to demonstrate that, thanks to the use of Best Gap, EONs can exploit the network flexibility and reduce the blocking ratio. On the other hand, operators must face profound architectural changes to increase the adaptability and flexibility of networks and ease their management. Thanks to the use of network function virtualisation (NFV), the necessary network functions that must be applied to offer a service can be deployed as virtual appliances hosted by commodity servers, which can be located in data centres, network nodes or even end-user premises. The appearance of new computation and networking paradigms, like multi-access edge computing (MEC), may facilitate the adaptation of communication networks to the new demands. Furthermore, the use of MEC technology will enable the possibility of installing those virtual network functions (VNFs) not only at data centres (DCs) and central offices (COs), traditional hosts of VFNs, but also at the edge nodes of the network. Since data processing is performed closer to the enduser, the latency associated to each service connection request can be reduced. MEC nodes will be usually connected between them and with the DCs and COs by optical networks. In such a scenario, deploying a network service requires completing two phases: the VNF-placement, i.e., deciding the number and location of VNFs, and the VNF-chaining, i.e., connecting the VNFs that the traffic associated to a service must transverse in order to establish the connection. In the chaining process, not only the existence of VNFs with available processing capacity, but the availability of network resources must be taken into account to avoid the rejection of the connection request. Taking into consideration that the backhaul of this scenario will be usually based on WRONs or EONs, it is necessary to design the virtual topology (i.e., the set of lightpaths established in the networks) in order to transport the tra c from one node to another. The process of designing the virtual topology includes deciding the number of connections or lightpaths, allocating them a route and spectral resources, and finally grooming the traffic into the created lightpaths. Lastly, a failure in the equipment of a node in an NFV environment can cause the disruption of the SCs traversing the node. This can cause the loss of huge amounts of data and affect thousands of end-users. In consequence, it is key to provide the network with faultmanagement techniques able to guarantee the resilience of the established connections when a node fails. For the mentioned reasons, it is necessary to design orchestration algorithms which solve the VNF-placement, chaining and network resource allocation problems in 5G networks with optical backhaul. Moreover, some versions of those algorithms must also implements protection techniques to guarantee the resilience system in case of failure. This thesis makes contribution in that line. Firstly, a genetic algorithm is proposed to solve the VNF-placement and VNF-chaining problems in a 5G network with optical backhaul based on star topology: GASM (genetic algorithm for effective service mapping). Then, we propose a modification of that algorithm in order to be applied to dynamic scenarios in which the reconfiguration of the planning is allowed. Furthermore, we enhanced the modified algorithm to include a learning step, with the objective of improving the performance of the algorithm. In this thesis, we also propose an algorithm to solve not only the VNF-placement and VNF-chaining problems but also the design of the virtual topology, considering that a WRON is deployed as the backhaul network connecting MEC nodes and CO. Moreover, a version including individual VNF protection against node failure has been also proposed and the effect of using shared/dedicated and end-to-end SC/individual VNF protection schemes are also analysed. Finally, a new algorithm that solves the VNF-placement and chaining problems and the virtual topology design implementing a new chaining technique is also proposed. Its corresponding versions implementing individual VNF protection are also presented. Furthermore, since the method works with any type of WDM mesh topologies, a technoeconomic study is presented to compare the effect of using different network topologies in both the network performance and cost.Departamento de Teoría de la Señal y Comunicaciones e Ingeniería TelemáticaDoctorado en Tecnologías de la Información y las Telecomunicacione

Traffic engineering in dynamic optical networks

Traffic Engineering (TE) refers to all the techniques a Service Provider employs to improve the efficiency and reliability of network operations. In IP over Optical (IPO) networks, traffic coming from upper layers is carried over the logical topology defined by the set of established lightpaths. Within this framework then, TE techniques allow to optimize the configuration of optical resources with respect to an highly dynamic traffic demand. TE can be performed with two main methods: if the demand is known only in terms of an aggregated traffic matrix, the problem of automatically updating the configuration of an optical network to accommodate traffic changes is called Virtual Topology Reconfiguration (VTR). If instead the traffic demand is known in terms of data-level connection requests with sub-wavelength granularity, arriving dynamically from some source node to any destination node, the problem is called Dynamic Traffic Grooming (DTG). In this dissertation new VTR algorithms for load balancing in optical networks based on Local Search (LS) techniques are presented. The main advantage of using LS is the minimization of network disruption, since the reconfiguration involves only a small part of the network. A comparison between the proposed schemes and the optimal solutions found via an ILP solver shows calculation time savings for comparable results of network congestion. A similar load balancing technique has been applied to alleviate congestion in an MPLS network, based on the efficient rerouting of Label-Switched Paths (LSP) from the most congested links to allow a better usage of network resources. Many algorithms have been developed to deal with DTG in IPO networks, where most of the attention is focused on optimizing the physical resources utilization by considering specific constraints on the optical node architecture, while very few attention has been put so far on the Quality of Service (QoS) guarantees for the carried traffic. In this thesis a novel Traffic Engineering scheme is proposed to guarantee QoS from both the viewpoint of service differentiation and transmission quality. Another contribution in this thesis is a formal framework for the definition of dynamic grooming policies in IPO networks. The framework is then specialized for an overlay architecture, where the control plane of the IP and optical level are separated, and no information is shared between the two. A family of grooming policies based on constraints on the number of hops and on the bandwidth sharing degree at the IP level is defined, and its performance analyzed in both regular and irregular topologies. While most of the literature on DTG problem implicitly considers the grooming of low-speed connections onto optical channels using a TDM approach, the proposed grooming policies are evaluated here by considering a realistic traffic model which consider a Dynamic Statistical Multiplexing (DSM) approach, i.e. a single wavelength channel is shared between multiple IP elastic traffic flows

Multi-layer traffic engineering in optical networks under physical layer impairments

Ankara : The Department of Electrical and Electronics Engineering and the Institute of Engineering and Sciences of Bilkent University, 2010.Thesis (Ph. D.) -- Bilkent University, 2010.Includes bibliographical references leaves 153-165.We study Traffic Engineering (TE) in Multiprotocol Label Switching (MPLS)/Wavelength Division Multiplexing (WDM) networks and propose a multi-layer TE method. MPLS provides powerful TE features for IP networks and is widely deployed in backbone networks. WDM can increase the transmission capacity of optical fibers to tremendous amounts, therefore it has been the dominant multiplexing technology used in the optical layer. The proposed multi-layer TE solution facilitates efficient use of network resources where the TE mechanisms in the MPLS and WDM layers coordinate. We consider a static WDM layer and available traffic expectation information. The TE problem arising in the considered scenario is the Virtual Topology Design (VTD) problem, which involves the decision of WDM lightpaths to be established, calculation of MPLS Label Switched Paths (LSPs) on the resulting virtual topology, and calculation of the routes and wavelengths in the physical topology that correspond to the lightpaths in the virtual topology. We assume a daily traffic pattern changing with the time of day and aim to design a static virtual topology that satisfies as much of the offered traffic as possible, over the whole day. In our proposed solution, the multi-layer VTD problem is solved by decomposing it into two sub-problems, each involving in a single layer. The decomposition approach is used in the thesis due to the huge computational burden of the combined solution for real-life networks. The sub-problem in the MPLS layer is the design of the lightpath topology and calculation of the LSP routes on this virtual topology. This problem is known to be NP-complete and finding its optimum solution is possible only for small networks. We propose a Tabu Search based heuristic method to solve two versions of this problem, resource oriented and performance oriented. Integer Linear Programming (ILP) relaxations are also developed for obtaining upper and lower bounds. We show that the gap between the produced solutions and the lower and upper bounds are around 10% and 7% for the resource and performance oriented problems, respectively. Since the actual traffic can show deviations from the expected values, we also developed an MPLS layer online TE method to compensate the instantaneous fluctuations of the traffic flows. In the proposed method, the LSPs are rerouted dynamically using a specially designed cost function. Our numerical studies show that using the designed cost function results in much lower blockings than using commonly used Widest Shortest Path First and Available Shortest Path First approaches in the literature. The corresponding sub-problem of the multi-layer VTD problem in the WDM layer is the Static Lightpath Establishment (SLE) problem. Along with the capacity and wavelength continuity constraints, we also consider the Bit Error Rate (BER) constraints due to physical layer impairments such as attenuation, polarization mode dispersion and switch crosstalk. This problem is NP-complete even without the BER constraints. We propose a heuristic solution method and develop an exact ILP formulation to evaluate the performance of the proposed method for small problem sizes. Our proposed method produces solutions close to the optimum solutions for the cases in which the ILP formulation could be solved to optimality. Then, these solution methods for the single layer sub-problems are combined in a multi-layer TE scheme to solve the VTD problem in both layers jointly. The proposed TE scheme considers the physical layer limitations and optical impairments. This TE scheme can be applied by keeping each layer’s information hidden from the other layer, but our simulations show that it can produce more effective and efficient solutions when the physical layer topology information is shared with the MPLS layer. We also investigate the effect of non-uniform optical components in terms of impairment characteristics. The numerical results show that more traffic can be routed when all the components in the network have moderate impairment characteristics, compared to the case in which some components have better and some have worse impairment characteristics.Şengezer, NamıkPh.D

Characterization, design and re-optimization on multi-layer optical networks

L'augment de volum de tràfic IP provocat per l'increment de serveis multimèdia com HDTV o vídeo conferència planteja nous reptes als operadors de xarxa per tal de proveir transmissió de dades eficient. Tot i que les xarxes mallades amb multiplexació per divisió de longitud d'ona (DWDM) suporten connexions òptiques de gran velocitat, aquestes xarxes manquen de flexibilitat per suportar tràfic d’inferior granularitat, fet que provoca un pobre ús d'ample de banda. Per fer front al transport d'aquest tràfic heterogeni, les xarxes multicapa representen la millor solució. Les xarxes òptiques multicapa permeten optimitzar la capacitat mitjançant l'empaquetament de connexions de baixa velocitat dins de connexions òptiques de gran velocitat. Durant aquesta operació, es crea i modifica constantment una topologia virtual dinàmica gràcies al pla de control responsable d’aquestes operacions. Donada aquesta dinamicitat, un ús sub-òptim de recursos pot existir a la xarxa en un moment donat. En aquest context, una re-optimizació periòdica dels recursos utilitzats pot ser aplicada, millorant així l'ús de recursos. Aquesta tesi està dedicada a la caracterització, planificació, i re-optimització de xarxes òptiques multicapa de nova generació des d’un punt de vista unificat incloent optimització als nivells de capa física, capa òptica, capa virtual i pla de control. Concretament s'han desenvolupat models estadístics i de programació matemàtica i meta-heurístiques. Aquest objectiu principal s'ha assolit mitjançant cinc objectius concrets cobrint diversos temes oberts de recerca. En primer lloc, proposem una metodologia estadística per millorar el càlcul del factor Q en problemes d'assignació de ruta i longitud d'ona considerant interaccions físiques (IA-RWA). Amb aquest objectiu, proposem dos models estadístics per computar l'efecte XPM (el coll d'ampolla en termes de computació i complexitat) per problemes IA-RWA, demostrant la precisió d’ambdós models en el càlcul del factor Q en escenaris reals de tràfic. En segon lloc i fixant-nos a la capa òptica, presentem un nou particionament del conjunt de longituds d'ona que permet maximitzar, respecte el cas habitual, la quantitat de tràfic extra proveït en entorns de protecció compartida. Concretament, definim diversos models estadístics per estimar la quantitat de tràfic donat un grau de servei objectiu, i diferents models de planificació de xarxa amb l'objectiu de maximitzar els ingressos previstos i el valor actual net de la xarxa. Després de resoldre aquests problemes per xarxes reals, concloem que la nostra proposta maximitza ambdós objectius. En tercer lloc, afrontem el disseny de xarxes multicapa robustes davant de fallida simple a la capa IP/MPLS i als enllaços de fibra. Per resoldre aquest problema eficientment, proposem un enfocament basat en sobre-dimensionar l'equipament de la capa IP/MPLS i recuperar la connectivitat i el comparem amb la solució convencional basada en duplicar la capa IP/MPLS. Després de comparar solucions mitjançant models ILP i heurístiques, concloem que la nostra solució permet obtenir un estalvi significatiu en termes de costos de desplegament. Com a quart objectiu, introduïm un mecanisme adaptatiu per reduir l'ús de ports opto-electrònics (O/E) en xarxes multicapa sota escenaris de tràfic dinàmic. Una formulació ILP i diverses heurístiques són desenvolupades per resoldre aquest problema, que permet reduir significativament l’ús de ports O/E en temps molt curts. Finalment, adrecem el problema de disseny resilient del pla de control GMPLS. Després de proposar un nou model analític per quantificar la resiliència en topologies mallades de pla de control, usem aquest model per proposar un problema de disseny de pla de control. Proposem un procediment iteratiu lineal i una heurística i els usem per resoldre instàncies reals, arribant a la conclusió que es pot reduir significativament la quantitat d'enllaços del pla de control sense afectar la qualitat de servei a la xarxa.The explosion of IP traffic due to the increase of IP-based multimedia services such as HDTV or video conferencing poses new challenges to network operators to provide a cost-effective data transmission. Although Dense Wavelength Division Multiplexing (DWDM) meshed transport networks support high-speed optical connections, these networks lack the flexibility to support sub-wavelength traffic leading to poor bandwidth usage. To cope with the transport of that huge and heterogeneous amount of traffic, multilayer networks represent the most accepted architectural solution. Multilayer optical networks allow optimizing network capacity by means of packing several low-speed traffic streams into higher-speed optical connections (lightpaths). During this operation, a dynamic virtual topology is created and modified the whole time thanks to a control plane responsible for the establishment, maintenance, and release of connections. Because of this dynamicity, a suboptimal allocation of resources may exist at any time. In this context, a periodically resource reallocation could be deployed in the network, thus improving network resource utilization. This thesis is devoted to the characterization, planning, and re-optimization of next-generation multilayer networks from an integral perspective including physical layer, optical layer, virtual layer, and control plane optimization. To this aim, statistical models, mathematical programming models and meta-heuristics are developed. More specifically, this main objective has been attained by developing five goals covering different open issues. First, we provide a statistical methodology to improve the computation of the Q-factor for impairment-aware routing and wavelength assignment problems (IA-RWA). To this aim we propose two statistical models to compute the Cross-Phase Modulation variance (which represents the bottleneck in terms of computation time and complexity) in off-line and on-line IA-RWA problems, proving the accuracy of both models when computing Q-factor values in real traffic scenarios. Second and moving to the optical layer, we present a new wavelength partitioning scheme that allows maximizing the amount of extra traffic provided in shared path protected environments compared with current solutions. Specifically, we define several statistical models to estimate the traffic intensity given a target grade of service, and different network planning problems for maximizing the expected revenues and net present value. After solving these problems for real networks, we conclude that our proposed scheme maximizes both revenues and NPV. Third, we tackle the design of survivable multilayer networks against single failures at the IP/MPLS layer and WSON links. To efficiently solve this problem, we propose a new approach based on over-dimensioning IP/MPLS devices and lightpath connectivity and recovery and we compare it against the conventional solution based on duplicating backbone IP/MPLS nodes. After evaluating both approaches by means of ILP models and heuristic algorithms, we conclude that our proposed approach leads to significant CAPEX savings. Fourth, we introduce an adaptive mechanism to reduce the usage of opto-electronic (O/E) ports of IP/MPLS-over-WSON multilayer networks in dynamic scenarios. A ILP formulation and several heuristics are developed to solve this problem, which allows significantly reducing the usage of O/E ports in very short running times. Finally, we address the design of resilient control plane topologies in GMPLS-enabled transport networks. After proposing a novel analytical model to quantify the resilience in mesh control plane topologies, we use this model to propose a problem to design the control plane topology. An iterative model and a heuristic are proposed and used to solve real instances, concluding that a significant reduction in the number of control plane links can be performed without affecting the quality of service of the network

Error modeling of precision orientation sensors in a fixed base simulation

Models of noise and dynamic characteristics of gyro and autocollimator for very small signal levels are presented. Measurements were evaluated using spectral techniques for identifying noise from base motion. The experiment was constructed to measure the precession, due to relativistic effects, of an extremely precise earth-orbiting gyroscope. The design goal for nonrelativistic gyro drift is 0.001 arcsec per year. An analogous fixed base simulator was used in developing methods of instrument error modeling and performance evaluation applicable to the relativity experiment sensors and other precision pointing instruments. Analysis of autocollimator spectra uncovered the presence of a platform gimbal resonance. The source of resonance was isolated to gimbal bearing elastic restraint properties most apparent at very small levels of motion. A model of these properties which include both elastic and coulomb friction characteristics is discussed, and a describing function developed

Optimización metaheurística para la planificación de redes WDM

Las implementaciones actuales de las redes de telecomunicaciones no permiten soportar el incremento en la demanda de ancho de banda producido por el crecimiento del tráfico de datos en las últimas décadas. La aparición de la fibra óptica y el desarrollo de la tecnología de multiplexación por división de longitudes de onda (WDM) permite incrementar la capacidad de redes de telecomunicaciones existentes mientras se minimizan costes. En este trabajo se planifican redes ópticas WDM mediante la resolución de los problemas de Provisión y Conducción en redes WDM (Provisioning and Routing Problem) y de Supervivencia (Survivability Problem). El Problema de Conducción y Provisión consiste en incrementar a mínimo coste la capacidad de una red existente de tal forma que se satisfaga un conjunto de requerimientos de demanda. El problema de supervivencia consiste en garantizar el flujo del tráfico a través de una red en caso de fallo de alguno de los elementos de la misma. Además se resuelve el Problema de Provisión y Conducción en redes WDM con incertidumbre en las demandas. Para estos problemas se proponen modelos de programación lineal entera. Las metaheurísticas proporcionan un medio para resolver problemas de optimización complejos, como los que surgen al planificar redes de telecomunicaciones, obteniendo soluciones de alta calidad en un tiempo computacional razonable. Las metaheurísticas son estrategias que guían y modifican otras heurísticas para obtener soluciones más allá de las generadas usualmente en la búsqueda de optimalidad local. No garantizan que la mejor solución encontrada, cuando se satisfacen los criterios de parada, sea una solución óptima global del problema. Sin embargo, la experimentación de implementaciones metaheurísticas muestra que las estrategias de búsqueda embebidas en tales procedimientos son capaces de encontrar soluciones de alta calidad a problemas difíciles en industria, negocios y ciencia. Para la solución del problema de Provisión y Conducción en Redes WDM, se desarrolla un algoritmo metaheurístico híbrido que combina principalmente ideas de las metaheurísticas Búsqueda Dispersa (Scatter Search) y Búsqueda Mutiarranque (Multistart). Además añade una componente tabú en uno de los procedimiento del algoritmo. Se utiliza el modelo de programación lineal entera propuesto por otros autores y se propone un modelo de programación lineal entera alternativo que proporciona cotas superiores al problema, pero incluye un menor número de variables y restricciones, pudiendo ser resuelto de forma óptima para tamaños de red mayores. Los resultados obtenidos por el algoritmo metaheurístico diseñado se comparan con los obtenidos por un procedimiento basado en permutaciones de las demandas propuesto anteriormente por otros autores, y con los dos modelos de programación lineal entera usados. Se propone modelos de programación lineal entera para sobrevivir la red en caso de fallos en un único enlace. Se proponen modelos para los esquemas de protección de enlace compartido, de camino compartido con enlaces disjuntos, y de camino compartido sin enlaces disjuntos. Se propone un método de resolución metaheurístico que obtiene mejores costes globales que al resolver el problema en dos fases, es decir, al resolver el problema de servicio y a continuación el de supervivencia. Se proponen además modelos de programación entera para resolver el problema de provisión en redes WDM con incertidumbres en las demandas

Australian Centre for Advanced Photovoltaics Annual Report 2019

Solar photovoltaics involves the generation of electricity directly from sunlight when this light shines upon solar cells packaged into a solar module. Silicon is the most common material used to make these photovoltaic cells, similarly to its predominant role in microelectronics, although several other photovoltaic materials are being actively investigated. The year 2019 was another important one for photovoltaics both in Australia and internationally. Rooftop solar installations in Australia (<100 kW) increased by over 2.1 gigawatts during the year, a 35% increase over 2018, the previous record year, with a similar increase in large commercial systems. Solar’s contribution to electricity generation in the Australian National Electricity Market increased to 7.6% averaged over 2019, likely to exceed 10% average in 2020. Even more importantly, this strong solar contribution has significantly improved the power network’s ability to meet peaks in electricity demand during summer heatwaves, where solar is proving much more reliable than conventional coal generators, whether new or aging. The other big news from an Australian perspective is that the Australian invented and developed PERC (passivated emitter and rear cell) in 2019 became the cell manufactured in the highest volume internationally. Also, on this international front, annual global photovoltaic installations increased to a new record of 124 gigawatts installed in 2019, according to market analysts. Photovoltaics also reinforced its position as one of the lowest cost options for electricity production yet developed, with wholesale module selling prices dropping 20% from 2018 averaged over the year. The lowest bid for the long-term supply of solar via a power purchase agreement decreased to US$16.54/MWh in July 2019. Bids in Australia dropped to more closely match this international benchmark with the Clean Energy Regulator reporting that bids of AUD$45/MWh were now not uncommon. By combining with the company’s pumped hydro storage assets, Snowy Hydro claimed it was now able to offer “firm” solar- and wind-generated power on demand at AUD$70/MWh, well below the price from “baseload” coal plant. Australia has played a major role in achieving these very low costs and is expected to play a key role in future cost reductions through the ongoing activities of the Australian Centre for Advanced Photovoltaics (ACAP), documented in this 2019 Annual Report. This is the seventh annual ACAP report, with ACAP activities supported by the Australian Government through the Australian Renewable Energy Agency (ARENA). ACAP aims to significantly accelerate photovoltaic development by leveraging development of “over the horizon” photovoltaic technology, providing a pipeline of improved technology for increased performance and ongoing cost reduction. A second aim is to provide high quality training opportunities for the next generation of photovoltaic researchers, with one targeted outcome being to consolidate Australia’s position as the photovoltaic research and educational hub of the Asia-Pacific manufacturing region. In achieving these aims, ACAP works with a wide range of both local and international partners. ACAP came into being on 1 February 2013 after the signing of a Head Agreement between the University of New South Wales (UNSW) and ARENA. During 2013, related Collaboration Agreements were signed between UNSW and the other ACAP nodes, Australian National University (ANU), University of Melbourne (UoM), Monash University, University of Queensland (UQ) and CSIRO (Materials Science and Engineering, Melbourne) and, additionally, with the ACAP industrial partners, Suntech Research and Development, Australia (SRDA) (partnership now transferred to Wuxi Suntech Power Co., Ltd.), Trina Solar Ltd, BlueScope Steel and BT Imaging, and subsequently with PV Lighthouse, Greatcell Pty Ltd and RayGen Resources Pty Ltd. Our major international partners include the NSF-DOE Engineering Research Center for Quantum Energy and Sustainable Solar Technologies (QESST), based at Arizona State University, and the US National Renewable Energy Laboratory (NREL), as well as the Molecular Foundry, Berkeley, Stanford University, Georgia Institute of Technology, the University of California, Santa Barbara and the the Korean Green Energy Institute. This report covers the period from 1 January to 31 December 2019. Over the past seven years, ACAP has moved effectively to establish a high profile within the international research community. This is evidenced by the string of independently confirmed world records for energy conversion efficiency in efforts led by different nodes and for several different technologies since ACAP’s commencement. These include records for rear-junction silicon cells (ANU: 24.4%, 2013), overall sunlight to electricity conversion (UNSW, 40.4%, 2014; 40.6%, 2016), one-sun mini-module (UNSW: 34.5%, 2016), small-area “thin-film” CZTS (Cu2 ZnSnS4 ) cells (UNSW: 9.5%, 2016; 11.0%, 2017), for >1 cm2 CZTS cells (UNSW: 10.0%, 2017), perovskite mini modules (UNSW: 11.5%, 2016) and for >1 cm2 perovskite cells (UNSW: 18.0%, 2016; 19.6%, 2017; ANU: 21.6%, 2019). This tradition was continued into 2019 with key developments during the year summarised in the highlight pages immediately following this report. Particularly significant was the continued high level of recognition of ACAP’s impact through major local and international awards. In 2019, the Australian Academy of Technology and Engineering (ATSE) selected Professor Thorsten Trupke and Associate Professor Robert Bardos from the UNSW node for the prestigious Clunies Ross Award. The pair developed and commercialised photoluminescence imaging of silicon cells, ingots and wafers at UNSW, with development of this work supported over recent years by ACAP. This technology has been a gamechanger for the photovoltaics research community and the solar cell and module manufacturing industry, both locally and internationally. This and more detailed results described in the body of this 2019 Annual Report contributed to making 2019, once again, an extremely successful year for ACAP. I would like to thank ARENA for its ongoing financial support and also for the very effective involvement of ARENA personnel in supporting the ACAP program, both informally and via the ACAP National Steering Committee and the International Advisory Committee. I would additionally like to thank, in particular, all researchers affiliated with ACAP for their contributions to the broad range of progress reported in the following pages. Finally, I am pleased to be able to report that ACAP has taken another major step towards attaining its significant long-term objectives by achieving its key seventh-year milestones, on time and within budget. We look forward to similar progress in 2020 and in subsequent years

Biomedical Signal and Image Processing

Written for senior-level and first year graduate students in biomedical signal and image processing, this book describes fundamental signal and image processing techniques that are used to process biomedical information. The book also discusses application of these techniques in the processing of some of the main biomedical signals and images, such as EEG, ECG, MRI, and CT. New features of this edition include the technical updating of each chapter along with the addition of many more examples, the majority of which are MATLAB based