The AXIOM software layers

AXIOM project aims at developing a heterogeneous computing board (SMP-FPGA).The Software Layers developed at the AXIOM project are explained.OmpSs provides an easy way to execute heterogeneous codes in multiple cores. People and objects will soon share the same digital network for information exchange in a world named as the age of the cyber-physical systems. The general expectation is that people and systems will interact in real-time. This poses pressure onto systems design to support increasing demands on computational power, while keeping a low power envelop. Additionally, modular scaling and easy programmability are also important to ensure these systems to become widespread. The whole set of expectations impose scientific and technological challenges that need to be properly addressed.The AXIOM project (Agile, eXtensible, fast I/O Module) will research new hardware/software architectures for cyber-physical systems to meet such expectations. The technical approach aims at solving fundamental problems to enable easy programmability of heterogeneous multi-core multi-board systems. AXIOM proposes the use of the task-based OmpSs programming model, leveraging low-level communication interfaces provided by the hardware. Modular scalability will be possible thanks to a fast interconnect embedded into each module. To this aim, an innovative ARM and FPGA-based board will be designed, with enhanced capabilities for interfacing with the physical world. Its effectiveness will be demonstrated with key scenarios such as Smart Video-Surveillance and Smart Living/Home (domotics).Peer ReviewedPostprint (author's final draft

The AXIOM platform for next-generation cyber physical systems

Cyber-Physical Systems (CPSs) are widely used in many applications that require interactions between humans and their physical environment. These systems usually integrate a set of hardware-software components for optimal application execution in terms of performance and energy consumption. The AXIOM project (Agile, eXtensible, fast I/O Module), presented in this paper, proposes a hardware-software platform for CPS coupled with an easy parallel programming model and sufficient connectivity so that the performance can scale-up by adding multiple boards. AXIOM supports a task-based programming model based on OmpSs and leverages a high-speed, inexpensive communication interface called AXIOM-Link. The board also tightly couples the CPU with reconfigurable resources to accelerate portions of the applications. As case studies, AXIOM uses smart video surveillance, and smart home living applicationsThis work is partially supported by the European Union H2020 program through the AXIOM project (grant ICT-01-2014 GA 645496) and HiPEAC (GA 687698), by the Spanish Government through Programa Severo Ochoa (SEV-2015-0493), by the Spanish Ministry of Science and Technology through TIN2015-65316-P project, and by the Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272). We also thank the Xilinx University Program for its hardware and software donations.Peer ReviewedPostprint (author's final draft

Methods for reliable estimation of pulse transit time and blood pressure variations using smartphone sensors

Hypertension is known to affect around one third of adults globally and early diagnosis is essential to reduce the effects of this affliction. Today’s Blood Pressure (BP) monitoring cuffs are obtrusive and in- convenient for performing regular measurements, and continuous non-invasive blood pressure devices are too complex and expensive for ambulatory use. Hence, there is a strong need for affordable systems that can measure blood pressure (BP) variations throughout the day as this will allow to monitor, diagnose and follow-up not only patients at risk, but also healthy population in general for early diagnosis. A promising method for arterial BP estimation is to measure the Pulse Transit Time (PTT) and derive pres- sure values from it. However, current methods for measuring this surrogate marker of BP require com- plex sensing and analysis circuitry and the related medical devices are expensive and inconvenient for the user. In this paper, we present new methods to estimate PTT reliably and subsequently BP, from the baseline sensors of smartphones. This new approach involves determining PTT by simultaneously mea- suring the time the blood leaves the heart, by recording the heart sound using the standard microphone of the phone, and the time it reaches the finger, by measuring the pulse wave using the phone’s camera. We present algorithms that can be executed directly on current smartphones to obtain clean and robust heart sound signals and to extract the pulse wave characteristics. We also present methods to ensure a synchronous capture of the waveforms, which is essential to obtain reliable PTT values with inexpen- sive sensors. Additionally, we combine Autocorrelation and Fast Fourier Transform (FFT)-based methods for reliably estimating the user heart rate (HR) from his/her heart sounds, and describe how to use the calculate HR to compensate for the camera frame rate variations and to improve the robustness of PTT estimation. Our experiments show that the computational overhead of the proposed processing meth- ods is minimum, which allows real-time feedback to the user, and that the PTT values are fully accurate (beat-to-beat), thereby enabling state-of-the-art smartphones to be used as affordable medical devices

CONTREX: Design of embedded mixed-criticality CONTRol systems under consideration of EXtra-functional properties

The increasing processing power of today’s HW/SW platforms leads to the integration of more and more functions in a single device. Additional design challenges arise when these functions share computing resources and belong to different criticality levels. CONTREX complements current activities in the area of predictable computing platforms and segregation mechanisms with techniques to consider the extra-functional properties, i.e., timing constraints, power, and temperature. CONTREX enables energy efficient and cost aware design through analysis and optimization of these properties with regard to application demands at different criticality levels. This article presents an overview of the CONTREX European project, its main innovative technology (extension of a model based design approach, functional and extra-functional analysis with executable models and run-time management) and the final results of three industrial use-cases from different domain (avionics, automotive and telecommunication).The work leading to these results has received funding from the European Community’s Seventh Framework Programme FP7/2007-2011 under grant agreement no. 611146

The AQUAS ECSEL Project Aggregated Quality Assurance for Systems: Co-Engineering Inside and Across the Product Life Cycle

There is an ever-increasing complexity of the systems we engineer in modern society, which includes facing the convergence of the embedded world and the open world. This complexity creates increasing difficulty with providing assurance for factors including safety, security and performance. In such a context, the AQUAS project investigates the challenges arising from e.g., the inter-dependence of safety, security and performance of systems and aims at efficient solutions for the entire product life-cycle. The project builds on knowledge of partners gained in current or former EU projects and will demonstrate the newly developed methods and techniques for co-engineering across use cases spanning Aerospace, Medicine, Transport and Industrial Control.A special thanks to all the AQUAS consortium people that have worked on the AQUAS proposal on which this paper is based, especially to Charles Robinson (TRT), the proposal coordinator. The AQUAS project is funded from the ECSEL Joint Undertaking under grant agreement n 737475, and from National funding

A design concept for radiation hardened RADFET readout system for space applications

Instruments for measuring the absorbed dose and dose rate under radiation exposure, known as radiation dosimeters, are indispensable in space missions. They are composed of radiation sensors that generate current or voltage response when exposed to ionizing radiation, and processing electronics for computing the absorbed dose and dose rate. Among a wide range of existing radiation sensors, the Radiation Sensitive Field Effect Transistors (RADFETs) have unique advantages for absorbed dose measurement, and a proven record of successful exploitation in space missions. It has been shown that the RADFETs may be also used for the dose rate monitoring. In that regard, we propose a unique design concept that supports the simultaneous operation of a single RADFET as absorbed dose and dose rate monitor. This enables to reduce the cost of implementation, since the need for other types of radiation sensors can be minimized or eliminated. For processing the RADFET's response we propose a readout system composed of analog signal conditioner (ASC) and a self-adaptive multiprocessing system-on-chip (MPSoC). The soft error rate of MPSoC is monitored in real time with embedded sensors, allowing the autonomous switching between three operating modes (high-performance, de-stress and fault-tolerant), according to the application requirements and radiation conditions

Task mapping and mesh topology exploration for an FPGA-based network on chip

International audienceTask mapping strategies on NoC (Network-on-Chip) have a huge impact on the timing performance and power consumption. So does the to-pology. In this paper, we describe the exploration flow of task mapping algorithms using different NoC mesh shapes. The flow is used to evaluate timing and energy consumption based on a NoC emulation platform. It is open to any task mapping algorithms and to any shapes of NoC mesh. A heterogeneous (PC and FPGA) platform is used to fully perform each step of the flow. The experiments demonstrate that the most appropriate task mapping strategy and the most suitable NoC shape strongly depend on the algorithm used. Depending on the timing latency results obtained and the FPGA resources used, the designer can select the appropriate task mapping strategy on the suitable shape in a short exploration time and with precise timing evaluation

Increasing the reliability and applicability of measurement-based probabilistic timing analysis

Tese (doutorado) - Universidade Federal de Santa Catarina, Centro Tecnológico, Programa de Pós-Graduação em Engenharia de Automação e Sistemas, Florianópolis, 2019Conforme a complexidade das arquiteturas computacionais aumenta para melhorar desempenho ou reduzir custos, o uso de processadores modernos em Sistemas de Tempo Real (STRs) é prejudicado cada vez mais pelo surgimento de efeitos temporais que dificultam a obtenção de limites confiáveis e precisos para os Worst-Case Execution Times (WCETs) de tarefas. A Análise Temporal Probabilística Baseada em Medições (ATPBM) visa determinar limites probabilísticos de WCET (i.e. pWCETs) aplicando a Teoria de Valores Extremos (TVE) sobre medições de tempos de execução, e é portanto promissora no tratamento da complexidade de hardware no projeto de STRs. Processadores temporalmente aleatorizados foram recentemente propostos para tornar o comportamento temporal de sistemas computacionais mais facilmente analisável através de ferramental probabilístico, e são projetados substituindo informações internas determinísticas ou especulativas por números (pseudo-)aleatórios. A pesquisa cujos resultados são apresentados nesta tese produziu contribuições em duas frentes distintas. Em primeiro lugar, foram propostos e aplicados métodos para avaliar a confiabilidade dos pWCETs produzidos pela ATPBM, baseados na coleta de grandes amostras de tempos de execução e na comparação (1) dos pWCETs com os maiores tempos de execução observados, e (2) das densidades de excedência dos pWCETs com seus valores esperados. Essas avaliações indicaram que modelos probabilísticos da TVE projetados para gerar margens mais precisas podem muitas vezes levar a subestimativas de pWCETs, e recomendou-se então que modelos sobrestimadores devem ser utilizados para obter-se pWCETs mais confiáveis. Em segundo lugar, avaliou-se a hipótese de que técnicas de escalonamento aleatorizado podem beneficiar a análise temporal de tarefas executadas em pipelines multithread através da ATPBM, por levarem os tempos de execução produzidos a atenderem às premissas básicas de aplicabilidade da técnica. Para tal, foram considerados tanto (A) um escalonador puramente aleatório, quanto (B) um escalonador aleatorizado capaz de limitar os efeitos temporais da interferência entre threads, sem comprometer sua analisabilidade pela ATPBM, através de um mecanismo de regulação de elegibilidade baseado em créditos.Abstract: As the complexity of computer architectures grows in order to improve performance and/or to reduce costs, the use of modern processors in the design of Real-Time Systems (RTSs) is increasingly hampered by the emergence of timing effects that challenge determining reliable and tight bounds for tasks' Worst-Case Execution Times (WCETs). The Measurement-Based Probabilistic Timing Analysis (MBPTA) technique aims determining probabilistic WCET bounds (i.e. pWCETs) by applying Extreme Value Theory (EVT) on tasks' execution time measurements, and is hence promising in handling hardware complexity issues within RTSs' design. Hardware-level time-randomized processors were recently proposed as a means to cause computing systems' timing behaviour to become more easily analysable through probabilistic tools, and are designed replacing deterministic or speculative internal information with (pseudo-)random numbers. The scientific research whose outcomes are presented in this thesis produced contributions on two distinct fronts. In first place, we proposed and applied methods for evaluating the reliability of pWCET estimates produced using MBPTA, based on collecting large execution time samples and then comparing (1) the pWCETs against the largest observed execution times, and (2) pWCETs' exceedance densities against their expected values. These evaluations led us to conclude that EVT probabilistic models intended to yield more precise bounds may often lead to pWCET underestimations, and we hence recommended that upper-bounding models should instead be used for deriving pWCETs with increased reliability. In second place, we evaluated the hypothesis that randomized scheduling techniques can benefit the timing analysis of tasks executed on multithread pipelines through MBPTA, by causing the yielded execution times to meet the technique's basic application requirements. For that, we considered both (A) a scheduler that employs a purely random policy, and (B) a randomized scheduler capable of limiting the timing effects of inter-thread interference, without compromising analysability, by using a credit-based eligibility regulation mechanism