Ultra-low Quiescent Current NMOS Low Dropout Regulator With Fast Transient response for Always-On Internet-of-Things Applications

abstract: The increased adoption of Internet-of-Things (IoT) for various applications like smart home, industrial automation, connected vehicles, medical instrumentation, etc. has resulted in a large scale distributed network of sensors, accompanied by their power supply regulator modules, control and data transfer circuitry. Depending on the application, the sensor location can be virtually anywhere and therefore they are typically powered by a localized battery. To ensure long battery-life without replacement, the power consumption of the sensor nodes, the supply regulator and, control and data transmission unit, needs to be very low. Reduction in power consumption in the sensor, control and data transmission is typically done by duty-cycled operation such that they are on periodically only for short bursts of time or turn on only based on a trigger event and are otherwise powered down. These approaches reduce their power consumption significantly and therefore the overall system power is dominated by the consumption in the always-on supply regulator. Besides having low power consumption, supply regulators for such IoT systems also need to have fast transient response to load current changes during a duty-cycled operation. Supply regulation using low quiescent current low dropout (LDO) regulators helps in extending the battery life of such power aware always-on applications with very long standby time. To serve as a supply regulator for such applications, a 1.24 µA quiescent current NMOS low dropout (LDO) is presented in this dissertation. This LDO uses a hybrid bias current generator (HBCG) to boost its bias current and improve the transient response. A scalable bias-current error amplifier with an on-demand buffer drives the NMOS pass device. The error amplifier is powered with an integrated dynamic frequency charge pump to ensure low dropout voltage. A low-power relaxation oscillator (LPRO) generates the charge pump clocks. Switched-capacitor pole tracking (SCPT) compensation scheme is proposed to ensure stability up to maximum load current of 150 mA for a low-ESR output capacitor range of 1 - 47µF. Designed in a 0.25 µm CMOS process, the LDO has an output voltage range of 1V – 3V, a dropout voltage of 240 mV, and a core area of 0.11 mm2.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Modelling of a P-MOS low drop-out voltage regulator with fast transient response and its feasibility in low cost technology

I regolatori di tensione lineari sono dei componenti molto utili in campo elettronico. Questi componenti garantiscono una tensione costante in uscita a fronte di una tensione variabile in ingresso. Gli alimentatori di ultima generazione, sfruttano la serie di un convertitore tipo switching e di un regolatore lineare. Nelle applicazioni che funzionano tramite batterie, il regolatore lineare è assi diffuso. Per esempio, in campo automobilistico, i regolatori lineari sono ampiamente utilizzati in quanto ad ogni sistema elettrico è garantito una tensione costante. In questa tesi si è analizzato nel dettaglio i principali tipi di regolatori lineari, focalizzandosi su quelli a basse cadute low drop-out. Ci si è inoltre focalizzati su una tecnica di compensazione multi retroazione. Per far questo si è realizzato una interfaccia grafica tramite Matlab chiamata LDO behavior, che riuscisse a spiegare, almeno in prima approssimazione, l'effetto dei feedback sul sistema totale. La fase di progettazione è stata realizzata sfruttando le informazioni fornite da questa interfaccia grafica. Infine si è realizzato un test-chip che è stato caratterizzato in laboratori

A Case Study in CMOS Design Scaling for Analog Applications: The Ringamp LDO

As CMOS process nodes scale to smaller feature sizes, process optimizations are made to achieve improvements in digital circuit performance, such as increasing speed and memory, while decreasing power consumption. Unfortunately for analog design, these optimizations usually come at the expense of poorer transistor performance, such as reduced small signal output resistance and increased channel length modulation. The ring amplifier has been proposed as a digital solution to the analog scaling problem, by configuring digital inverters to function as analog amplifiers through deadzone biasing. As digital inverters naturally scale, the ring amplifier is a promising area of exploration for analog design. This work presents a ring amplifier scaling study by demonstration of scaling an output capacitor-less, ring amplifier based low-dropout voltage regulator designed in a standard 180 nm CMOS process down to a standard 90 nm CMOS process

CMOS Design of Reconfigurable SoC Systems for Impedance Sensor Devices

La rápida evolución en el campo de los sensores inteligentes, junto con los avances en las tecnologías de la computación y la comunicación, está revolucionando la forma en que recopilamos y analizamos datos del mundo físico para tomar decisiones, facilitando nuevas soluciones que desempeñan tareas que antes eran inconcebibles de lograr.La inclusión en un mismo dado de silicio de todos los elementos necesarios para un proceso de monitorización y actuación ha sido posible gracias a los avances en micro (y nano) electrónica. Al mismo tiempo, la evolución de las tecnologías de procesamiento y micromecanizado de superficies de silicio y otros materiales complementarios ha dado lugar al desarrollo de sensores integrados compatibles con CMOS, lo que permite la implementación de matrices de sensores de alta densidad. Así, la combinación de un sistema de adquisición basado en sensores on-Chip, junto con un microprocesador como núcleo digital donde se puede ejecutar la digitalización de señales, el procesamiento y la comunicación de datos proporciona características adicionales como reducción del coste, compacidad, portabilidad, alimentación por batería, facilidad de uso e intercambio inteligente de datos, aumentando su potencial número de aplicaciones.Esta tesis pretende profundizar en el diseño de un sistema portátil de medición de espectroscopía de impedancia de baja potencia operado por batería, basado en tecnologías microelectrónicas CMOS, que pueda integrarse con el sensor, proporcionando una implementación paralelizable sin incrementar significativamente el tamaño o el consumo, pero manteniendo las principales características de fiabilidad y sensibilidad de un instrumento de laboratorio. Esto requiere el diseño tanto de la etapa de gestión de la energía como de las diferentes celdas que conforman la interfaz, que habrán de satisfacer los requisitos de un alto rendimiento a la par que las exigentes restricciones de tamaño mínimo y bajo consumo requeridas en la monitorización portátil, características que son aún más críticas al considerar la tendencia actual hacia matrices de sensores.A nivel de celdas, se proponen diferentes circuitos en un proceso CMOS de 180 nm: un regulador de baja caída de voltaje como unidad de gestión de energía, que proporciona una alimentación de 1.8 V estable, de bajo ruido, precisa e independiente de la carga para todo el sistema; amplificadores de instrumentación con una aproximación completamente diferencial, que incluyen una etapa de entrada de voltaje/corriente configurable, ganancia programable y ancho de banda ajustable, tanto en la frecuencia de corte baja como alta; un multiplicador para conformar la demodulación dual, que está embebido en el amplificador para optimizar consumo y área; y filtros pasa baja totalmente integrados, que actúan como extractores de magnitud de DC, con frecuencias de corte ajustables desde sub-Hz hasta cientos de Hz.<br /

A Silicon Carbide Linear Voltage Regulator for High Temperature Applications

Current market demands have pushed the capabilities of silicon to the edge. High temperature and high power applications require a semiconductor device to operate reliably in very harsh environments. This situation has awakened interests in other types of semiconductors, usually with a higher bandgap than silicon\u27s, as the next venue for the fabrication of integrated circuits (IC) and power devices. Silicon Carbide (SiC) has so far proven to be one of the best options in the power devices field. This dissertation presents the first attempt to fabricate a SiC linear voltage regulator. This circuit would provide a power management option for developing SiC processes due to its relatively simple implementation and yet, a performance acceptable to today\u27s systems applications. This document details the challenges faced and methods needed to design and fabricate the circuit as well as measured data corroborating design simulation results

Scalable Analysis, Verification and Design of IC Power Delivery

Due to recent aggressive process scaling into the nanometer regime, power delivery network design faces many challenges that set more stringent and specific requirements to the EDA tools. For example, from the perspective of analysis, simulation efficiency for large grids must be improved and the entire network with off-chip models and nonlinear devices should be able to be analyzed. Gated power delivery networks have multiple on/off operating conditions that need to be fully verified against the design requirements. Good power delivery network designs not only have to save the wiring resources for signal routing, but also need to have the optimal parameters assigned to various system components such as decaps, voltage regulators and converters. This dissertation presents new methodologies to address these challenging problems. At first, a novel parallel partitioning-based approach which provides a flexible network partitioning scheme using locality is proposed for power grid static analysis. In addition, a fast CPU-GPU combined analysis engine that adopts a boundary-relaxation method to encompass several simulation strategies is developed to simulate power delivery networks with off-chip models and active circuits. These two proposed analysis approaches can achieve scalable simulation runtime. Then, for gated power delivery networks, the challenge brought by the large verification space is addressed by developing a strategy that efficiently identifies a number of candidates for the worst-case operating condition. The computation complexity is reduced from O(2^N) to O(N). At last, motivated by a proposed two-level hierarchical optimization, this dissertation presents a novel locality-driven partitioning scheme to facilitate divide-and-conquer-based scalable wire sizing for large power delivery networks. Simultaneous sizing of multiple partitions is allowed which leads to substantial runtime improvement. Moreover, the electric interactions between active regulators/converters and passive networks and their influences on key system design specifications are analyzed comprehensively. With the derived design insights, the system-level co-design of a complete power delivery network is facilitated by an automatic optimization flow. Results show significant performance enhancement brought by the co-design

Integrated Circuits for Programming Flash Memories in Portable Applications

Smart devices such as smart grids, smart home devices, etc. are infrastructure systems that connect the world around us more than before. These devices can communicate with each other and help us manage our environment. This concept is called the Internet of Things (IoT). Not many smart nodes exist that are both low-power and programmable. Floating-gate (FG) transistors could be used to create adaptive sensor nodes by providing programmable bias currents. FG transistors are mostly used in digital applications like Flash memories. However, FG transistors can be used in analog applications, too. Unfortunately, due to the expensive infrastructure required for programming these transistors, they have not been economical to be used in portable applications. In this work, we present low-power approaches to programming FG transistors which make them a good candidate to be employed in future wireless sensor nodes and portable systems. First, we focus on the design of low-power circuits which can be used in programming the FG transistors such as high-voltage charge pumps, low-drop-out regulators, and voltage reference cells. Then, to achieve the goal of reducing the power consumption in programmable sensor nodes and reducing the programming infrastructure, we present a method to program FG transistors using negative voltages. We also present charge-pump structures to generate the necessary negative voltages for programming in this new configuration

A Ringamp-Assisted, Output Capacitor-less Analog CMOS Low-Dropout Voltage Regulator

Continued advancements in state-of-the-art integrated circuits have furthered trends toward higher computational performance and increased functionality within smaller circuit area footprints, all while improving power efficiencies to meet the demands of mobile and battery-powered applications. A significant portion of these advancements have been enabled by continued scaling of CMOS technology into smaller process node sizes, facilitating faster digital systems and power optimized computation. However, this scaling has degraded classic analog amplifying circuit structures with reduced voltage headroom and lower device output resistance; and thus, lower available intrinsic gain. This work investigates these trends and their impact for fine-grain Low-Dropout (LDO) Voltage Regulators, leading to a presented design methodology and implementation of a state-of-the-art Ringamp-Assisted, Output Capacitor-less Analog CMOS LDO Voltage Regulator capable of both power scaling and process node scaling for general SoC applications

Development of high-performance low-dropout regulators for SoC applications.

Or, Pui Ying."July 2010."Thesis (M.Phil.)--Chinese University of Hong Kong, 2010.Includes bibliographical references.Abstracts in English and Chinese.AcknowledgmentsTable of ContentList of FiguresList of TablesList of PublicationsChapter Chapter 1 - --- Background of LDO ResearchChapter 1.1 --- Structure of a LDO --- p.1-1Chapter 1.2 --- Principle of Operation of LDO --- p.1-2Chapter 1.3 --- Steady-State Specification of LDO --- p.1-3Chapter 1.4 --- High-Frequency Specification of LDO --- p.1-3Chapter 1.5 --- Dynamic Specification of LDO --- p.1-4Chapter 1.6 --- An Advanced LDO Structure --- p.1-4Chapter 1.7 --- Contribution and Outline of the Thesis --- p.1-5References --- p.1-6Chapter Chapter 2 - --- PSRR AnalysisChapter 2.1 --- Modeling of the PSRR of LDO --- p.2-3Chapter 2.2 --- Analysis of LDO Circuit Using Proposed Modeling --- p.2-6Chapter 2.3 --- Conclusion of Chapter --- p.2-12References --- p.2-13Chapter Chapter 3- --- An Output-Capacitorless LDO with Direct Voltage-Spike DetectionChapter 3.1 --- Analysis of Output-Capacitorless LDO --- p.3-5Chapter 3.2 --- LDO with Proposed Voltage-Spike Detection Circuit --- p.3-7Chapter 3.3 --- Experimental Results --- p.3-15Chapter 3.4 --- Conclusion of Chapter --- p.3-21References --- p.3-22Chapter Chapter 4 - --- A LDO with Impedance Adjustment and Loop-Gain Boosting TechniqueChapter 4.1 --- Proposed LDO --- p.4-3Chapter 4.2 --- Experimental Results --- p.4-7Chapter 4.3 --- Comparison --- p.4-11Chapter 4.4 --- Conclusion of Chapter --- p.4-12Reference --- p.4-13Chapter Chapter 5 - --- Conclusion and Future Wor