Advanced instrumentation for aircraft icing research

A compact and rugged probe based on the phase Doppler method was evaluated as a means for characterizing icing clouds using airborne platforms and for advancing aircraft icing research in large scale wind tunnels. The Phase Doppler Particle Analyzer (PDPA) upon which the new probe was based is now widely recognized as an accurate method for the complete characterization of sprays. The prototype fiber optic-based probe was evaluated in simulated aircraft icing clouds and found to have the qualities essential to providing information that will advance aircraft icing research. Measurement comparisons of the size and velocity distributions made with the standard PDPA and the fiber optic probe were in excellent agreement as were the measurements of number density and liquid water content. Preliminary testing in the NASA Lewis Icing Research Tunnel (IRT) produced reasonable results but revealed some problems with vibration and signal quality at high speeds. The cause of these problems were identified and design changes were proposed to eliminate the shortcomings of the probe

Self-healing network architectures for multiwavelength optical metro/access networks.

Sun Xiaofeng.Thesis (M.Phil.)--Chinese University of Hong Kong, 2006.Includes bibliographical references (leaves 61-64).Abstracts in English and Chinese.Chapter CHAPTER 1 --- INTRODUCTION --- p.1Chapter 1.1 --- Optical network evolution --- p.2Chapter 1.1.1 --- Submarine and terrestrial long-haul fibre systems --- p.2Chapter 1.1.2 --- Metropolitan networks --- p.3Chapter 1.1.3 --- Access networks --- p.4Chapter 1.2 --- Motivation of this thesis --- p.6Chapter 1.3 --- Outline of this thesis --- p.7Chapter CHAPTER 2 --- PREVIOUS SELF-HEALING NETWORK ARCHITECTURES --- p.9Chapter 2.1 --- Introduction --- p.10Chapter 2.1.1 --- Previous protection architectures for access networks --- p.10Chapter 2.1.2 --- Previous protection architectures for metro access networks --- p.13Chapter 2.3 --- Previous protection architectures for metro backbone networks --- p.15Chapter 2.3.1 --- Unidirectional path-switched rings (UPSR) --- p.15Chapter 2.3.2 --- Bidirectional line-switched rings (BLSR) --- p.16Chapter 2.3.3 --- Ring interconnection and dual homing --- p.17Chapter 2.4 --- Summary --- p.19Chapter CHAPTER 3 --- SELF-HEALING NETWORK ARCHITECTURE FOR WDM OPTICAL ACCESS NETWORKS --- p.20Chapter 3.1 --- Introduction --- p.21Chapter 3.2 --- Star-Ring Protection Architecture (SRPA) --- p.21Chapter 3.2.1 --- Motivation --- p.21Chapter 3.2.2 --- Network topology of SRPA --- p.22Chapter 3.2.3 --- Wavelength assignment of SRPA --- p.22Chapter 3.2.4 --- Structure of ONU --- p.23Chapter 3.2.5 --- Protection mechanism --- p.25Chapter 3.2.6 --- Experimental demonstration --- p.26Chapter 3.2.7 --- Power budget --- p.28Chapter 3.2.8 --- Summary --- p.28Chapter 3.3 --- Duplicated-Tree Protection Architecture (DTPA) --- p.28Chapter 3.3.1 --- Motivation --- p.28Chapter 3.3.2 --- Network topology and wavelength assignment --- p.29Chapter 3.3.3 --- Structure of OLT --- p.30Chapter 3.3.4 --- Protection mechanism --- p.31Chapter 3.3.5 --- Experimental demonstration --- p.33Chapter 1.1.1 --- Summary --- p.34Chapter 1.4 --- Summary --- p.35Chapter CHAPTER 4 --- SINGLE-FIBER SELF-HEALING WDM RING NETWORK ARCHITECTURE FOR METRO ACCESS NETWORKS --- p.36Chapter 4.1 --- Introduction --- p.37Chapter 4.2 --- Network architecture and wavelength assignment --- p.37Chapter 4.3 --- Structure of access node --- p.39Chapter 4.4 --- Structure of hub node --- p.40Chapter 4.5 --- Protection mechanism --- p.42Chapter 4.6 --- Experimental demonstration --- p.43Chapter 4.7 --- Optimization of access node --- p.47Chapter 4.8 --- Scalability --- p.48Chapter 4.9 --- Summary --- p.49Chapter CHAPTER 5 --- SELF-HEALING WDM MESH NETWORK ARCHITECTURE FOR METRO BACKBONE NETWORKS… --- p.50Chapter 5.1 --- Introduction --- p.51Chapter 5.2 --- Network architecture and node structure --- p.51Chapter 5.3 --- Protection mechanism --- p.53Chapter 5.4 --- Experimental demonstration --- p.55Chapter 5.5 --- Summary --- p.57Chapter CHAPTER 6 --- SUMMARYAND FUTURE WORKS --- p.58Chapter 6.1 --- Summary of the Thesis --- p.59Chapter 6.2 --- Future Works --- p.59LIST OF PUBLICATIONS --- p.61REFERENCES --- p.6

Neurophysiology

Contains research objectives and reports on nine research projects.The Teagle Foundation, Inc.U.S. Air Force (Aeronautical Systems Division) under Contract AF33(616)-7783Bell Telephone Laboratories, Inc.National Institutes of Health [Grant M-4235-(C1)]National Institutes of Health (Grant B-1865-(C3))National Institutes of Health (Grant MP-4737)National Institutes of Health (Grant B-2480(C1)

Physical-Layer Security, Quantum Key Distribution and Post-quantum Cryptography

The growth of data-driven technologies, 5G, and the Internet place enormous pressure on underlying information infrastructure. There exist numerous proposals on how to deal with the possible capacity crunch. However, the security of both optical and wireless networks lags behind reliable and spectrally efficient transmission. Significant achievements have been made recently in the quantum computing arena. Because most conventional cryptography systems rely on computational security, which guarantees the security against an efficient eavesdropper for a limited time, with the advancement in quantum computing this security can be compromised. To solve these problems, various schemes providing perfect/unconditional security have been proposed including physical-layer security (PLS), quantum key distribution (QKD), and post-quantum cryptography. Unfortunately, it is still not clear how to integrate those different proposals with higher level cryptography schemes. So the purpose of the Special Issue entitled “Physical-Layer Security, Quantum Key Distribution and Post-quantum Cryptography” was to integrate these various approaches and enable the next generation of cryptography systems whose security cannot be broken by quantum computers. This book represents the reprint of the papers accepted for publication in the Special Issue

Convergence of millimeter-wave and photonic interconnect systems for very-high-throughput digital communication applications

In the past, radio-frequency signals were commonly used for low-speed wireless electronic systems, and optical signals were used for multi-gigabit wired communication systems. However, as the emergence of new millimeter-wave technology introduces multi-gigabit transmission over a wireless radio-frequency channel, the borderline between radio-frequency and optical systems becomes blurred. As a result, there come ample opportunities to design and develop next-generation broadband systems to combine the advantages of these two technologies to overcome inherent limitations of various broadband end-to-end interconnect systems in signal generation, recovery, synchronization, and so on. For the transmission distances of a few centimeters to thousands of kilometers, the convergence of radio-frequency electronics and optics to build radio-over-fiber systems ushers in a new era of research for the upcoming very-high-throughput broadband services. Radio-over-fiber systems are believed to be the most promising solution to the backhaul transmission of the millimeter-wave wireless access networks, especially for the license-free, very-high-throughput 60-GHz band. Adopting radio-over-fiber systems in access or in-building networks can greatly extend the 60-GHz signal reach by using ultra-low loss optical fibers. However, such high frequency is difficult to generate in a straightforward way. In this dissertation, the novel techniques of homodyne and heterodyne optical-carrier suppressions for radio-over-fiber systems are investigated and various system architectures are designed to overcome these limitations of 60-GHz wireless access networks, bringing the popularization of multi-gigabit wireless networks to become closer to the reality. In addition to the advantages for the access networks, extremely high spectral efficiency, which is the most important parameter for long-haul networks, can be achieved by radio-over-fiber signal generation. As a result, the transmission performance of spectrally efficient radio-over-fiber signaling, including orthogonal frequency division multiplexing and orthogonal wavelength division multiplexing, is broadly and deeply investigated. On the other hand, radio-over-fiber is also used for the frequency synchronization that can resolve the performance limitation of wireless interconnect systems. A novel wireless interconnects assisted by radio-over-fiber subsystems is proposed in this dissertation. In conclusion, multiple advantageous facets of radio-over-fiber systems can be found in various levels of end-to-end interconnect systems. The rapid development of radio-over-fiber systems will quickly change the conventional appearance of modern communications.PhDCommittee Chair: Gee-Kung Chang; Committee Member: Bernard Kippelen; Committee Member: Shyh-Chiang Shen; Committee Member: Thomas K. Gaylord; Committee Member: Umakishore Ramachandra

Optical Wireless Data Center Networks

Bandwidth and computation-intensive Big Data applications in disciplines like social media, bio- and nano-informatics, Internet-of-Things (IoT), and real-time analytics, are pushing existing access and core (backbone) networks as well as Data Center Networks (DCNs) to their limits. Next generation DCNs must support continuously increasing network traffic while satisfying minimum performance requirements of latency, reliability, flexibility and scalability. Therefore, a larger number of cables (i.e., copper-cables and fiber optics) may be required in conventional wired DCNs. In addition to limiting the possible topologies, large number of cables may result into design and development problems related to wire ducting and maintenance, heat dissipation, and power consumption. To address the cabling complexity in wired DCNs, we propose OWCells, a class of optical wireless cellular data center network architectures in which fixed line of sight (LOS) optical wireless communication (OWC) links are used to connect the racks arranged in regular polygonal topologies. We present the OWCell DCN architecture, develop its theoretical underpinnings, and investigate routing protocols and OWC transceiver design. To realize a fully wireless DCN, servers in racks must also be connected using OWC links. There is, however, a difficulty of connecting multiple adjacent network components, such as servers in a rack, using point-to-point LOS links. To overcome this problem, we propose and validate the feasibility of an FSO-Bus to connect multiple adjacent network components using NLOS point-to-point OWC links. Finally, to complete the design of the OWC transceiver, we develop a new class of strictly and rearrangeably non-blocking multicast optical switches in which multicast is performed efficiently at the physical optical (lower) layer rather than upper layers (e.g., application layer). Advisors: Jitender S. Deogun and Dennis R. Alexande

Telephone primer

The telephone is the most common and widely used electronic communication device in use today. Because of this, the military is heavily reliant on the telephone system and considers it the primary voice communications medium. Furthermore, recent technological advances will dramatically change the telephone as well as we know it today. This thesis will take a comprehensive look at the telephone in today's complex telecommunications environment. It will describe the technical aspects of individual components as well as how the system works as a whole. The divestiture of AT and T will be analyzed, especially the effects it has had on the military. After describing the historical and technical aspects of the telephone system, the thesis will focus its attention on military telephone programs and upgrades being planned to increase telephone capabilities and survivability.http://archive.org/details/telephoneprimer1094534900Commander, United States NavyApproved for public release; distribution is unlimited

Large Horizontal Near-field Scanner based on a Non-tethered Unmanned Aerial Vehicle

A horizontal planar scanner with an approximate size of 40 m x 40 m has been implemented using the Unmanned Aerial Vehicle (UAV) technology. The UAV is not wired to the ground to maintain the flexibility and short setup time of a non-tethered flight. In this configuration, the UAV-mounted continuous-wave source is not phase-locked to the on-the-ground receiver. A dual-polarized reference antenna placed on the ground is hence used to retrieve the relevant phase information. The presented approach has been applied on the Pre - Aperture Array Verification System (Pre -AAVS1) of the Square Kilometre Array, which is a digital beamformed array with 16 active elements. An inverse source technique has been applied on measured Near-Field (NF) data acquired on two different sets of points (one for each electric field component) from all the receiver channels. In this way, Embedded Element Patterns (EEPs), array calibration coefficients and pattern have been determined from NF data only. The achieved results have been validated using a complementary set of Far-Field (FF) measurements and simulations