A Review on Energy Consumption Optimization Techniques in IoT Based Smart Building Environments

In recent years, due to the unnecessary wastage of electrical energy in residential buildings, the requirement of energy optimization and user comfort has gained vital importance. In the literature, various techniques have been proposed addressing the energy optimization problem. The goal of each technique was to maintain a balance between user comfort and energy requirements such that the user can achieve the desired comfort level with the minimum amount of energy consumption. Researchers have addressed the issue with the help of different optimization algorithms and variations in the parameters to reduce energy consumption. To the best of our knowledge, this problem is not solved yet due to its challenging nature. The gap in the literature is due to the advancements in the technology and drawbacks of the optimization algorithms and the introduction of different new optimization algorithms. Further, many newly proposed optimization algorithms which have produced better accuracy on the benchmark instances but have not been applied yet for the optimization of energy consumption in smart homes. In this paper, we have carried out a detailed literature review of the techniques used for the optimization of energy consumption and scheduling in smart homes. The detailed discussion has been carried out on different factors contributing towards thermal comfort, visual comfort, and air quality comfort. We have also reviewed the fog and edge computing techniques used in smart homes

Sustainable consumption: towards action and impact. : International scientific conference November 6th-8th 2011, Hamburg - European Green Capital 2011, Germany: abstract volume

This volume contains the abstracts of all oral and poster presentations of the international scientific conference „Sustainable Consumption – Towards Action and Impact“ held in Hamburg (Germany) on November 6th-8th 2011. This unique conference aims to promote a comprehensive academic discourse on issues concerning sustainable consumption and brings together scholars from a wide range of academic disciplines. In modern societies, private consumption is a multifaceted and ambivalent phenomenon: it is a ubiquitous social practice and an economic driving force, yet at the same time, its consequences are in conflict with important social and environmental sustainability goals. Finding paths towards “sustainable consumption” has therefore become a major political issue. In order to properly understand the challenge of “sustainable consumption”, identify unsustainable patterns of consumption and bring forward the necessary innovations, a collaborative effort of researchers from different disciplines is needed

Development of Economic Water Usage Sensor and Cyber-Physical Systems Co-Simulation Platform for Home Energy Saving

In this thesis, two Cyber-Physical Systems (CPS) approaches were considered to reduce residential building energy consumption. First, a flow sensor was developed for residential gas and electric storage water heaters. The sensor utilizes unique temperature changes of tank inlet and outlet pipes upon water draw to provide occupant hot water usage. Post processing of measured pipe temperature data was able to detect water draw events. Conservation of energy was applied to heater pipes to determine relative internal water flow rate based on transient temperature measurements. Correlations between calculated flow and actual flow were significant at a 95% confidence level. Using this methodology, a CPS water heater controller can activate existing residential storage water heaters according to occupant hot water demand. The second CPS approach integrated an open-source building simulation tool, EnergyPlus, into a CPS simulation platform developed by the National Institute of Standards and Technology (NIST). The NIST platform utilizes the High Level Architecture (HLA) co-simulation protocol for logical timing control and data communication. By modifying existing EnergyPlus co-simulation capabilities, NIST’s open-source platform was able to execute an uninterrupted simulation between a residential house in EnergyPlus and an externally connected thermostat controller. The developed EnergyPlus wrapper for HLA co-simulation can allow active replacement of traditional real-time data collection for building CPS development. As such, occupant sensors and simple home CPS product can allow greater residential participation in energy saving practices, saving up to 33% on home energy consumption nationally

A three-dimensional model of residential energy consumer archetypes for local energy policy design in the UK

This paper reviews major studies in three traditional lines of research in residential energy consumption in the UK, i.e. economic/infrastructure, behaviour, and load profiling. Based on the review the paper proposes a three-dimensional model for archetyping residential energy consumers in the UK by considering property energy efficiency levels, the greenness of household behaviour of using energy, and the duration of property daytime occupancy. With the proposed model, eight archetypes of residential energy consumers in the UK have been identified. They are: pioneer greens, follower greens, concerned greens, home stayers, unconscientious wasters, regular wasters, daytime wasters, and disengaged wasters. Using a case study, these archetypes of residential energy consumers demonstrate the robustness of the 3-D model in aiding local energy policy/intervention design in the UK

USEM: A ubiquitous smart energy management system for residential homes

With the ever-increasing worldwide demand for energy, and the limited available energy resources, there is a growing need to reduce our energy consumption whenever possible. Therefore, over the past few decades a range of technologies have been proposed to assist consumers with reducing their energy use. Most of these have focused on decreasing energy consumption in the industry, transport, and services sectors. In more recent years, however, growing attention has been given to energy use in the residential sector, which accounts for nearly 30% of total energy consumption in the developed countries. Here we present one such system, which aims to assist residential users with monitoring their energy usage and provides mechanisms for setting up and controlling their home appliances to conserve energy. We also describe a user study we have conducted to evaluate the effectiveness of this system in supporting its users with a range of tools and visualizations developed for ubiquitous devices such as mobile phones and tablets. The findings of this study have shown the potential benefits of our system, and have identified areas of improvement that need to be addressed in the future

Fostering energy awareness in residential homes using mobile devices

There is considerable global effort being made towards identifying ways of reducing energy consumption to cope with growing demands. Although there is potential for energy saving in many sectors, our focus is on reducing energy consumption in residential homes. We have developed a system which combines home automation and energy usage monitoring technologies. The system offers a range of tools designed for mobile devices to assist users with monitoring their energy usage and provides mechanisms for setting up and controlling home appliances to conserve energy. In this paper we describe our system and a user study we have conducted to evaluate its effectiveness. The findings of the study show the potential benefits of this type of mobile technology

Green multimedia: informing people of their carbon footprint through two simple sensors

In this work we discuss a new, but highly relevant, topic to the multimedia community; systems to inform individuals of their carbon footprint, which could ultimately effect change in community carbon footprint-related activities. The reduction of carbon emissions is now an important policy driver of many governments, and one of the major areas of focus is in reducing the energy demand from the consumers i.e. all of us individually. In terms of CO2 generated from energy consumption, there are three predominant factors, namely electricity usage, thermal related costs, and transport usage. Standard home electricity and heating sensors can be used to measure the former two aspects, and in this paper we evaluate a novel technique to estimate an individual's transport-related carbon emissions through the use of a simple wearable accelerometer. We investigate how providing this novel estimation of transport-related carbon emissions through an interactive web site and mobile phone app engages a set of users in becoming more aware of their carbon emissions. Our evaluations involve a group of 6 users collecting 25 million accelerometer readings and 12.5 million power readings vs. a control group of 16 users collecting 29.7 million power readings