Hybrid Image Classification Technique for Land-Cover Mapping in the Arctic Tundra, North Slope, Alaska

Remotely sensed image classification techniques are very useful to understand vegetation patterns and species combination in the vast and mostly inaccessible arctic region. Previous researches that were done for mapping of land cover and vegetation in the remote areas of northern Alaska have considerably low accuracies compared to other biomes. The unique arctic tundra environment with short growing season length, cloud cover, low sun angles, snow and ice cover hinders the effectiveness of remote sensing studies. The majority of image classification research done in this area as reported in the literature used traditional unsupervised clustering technique with Landsat MSS data. It was also emphasized by previous researchers that SPOT/HRV-XS data lacked the spectral resolution to identify the small arctic tundra vegetation parcels. Thus, there is a motivation and research need to apply a new classification technique to develop an updated, detailed and accurate vegetation map at a higher spatial resolution i.e. SPOT-5 data. Traditional classification techniques in remotely sensed image interpretation are based on spectral reflectance values with an assumption of the training data being normally distributed. Hence it is difficult to add ancillary data in classification procedures to improve accuracy. The purpose of this dissertation was to develop a hybrid image classification approach that effectively integrates ancillary information into the classification process and combines ISODATA clustering, rule-based classifier and the Multilayer Perceptron (MLP) classifier which uses artificial neural network (ANN). The main goal was to find out the best possible combination or sequence of classifiers for typically classifying tundra type vegetation that yields higher accuracy than the existing classified vegetation map from SPOT data. Unsupervised ISODATA clustering and rule-based classification techniques were combined to produce an intermediate classified map which was used as an input to a Multilayer Perceptron (MLP) classifier. The result from the MLP classifier was compared to the previous classified map and for the pixels where there was a disagreement for the class allocations, the class having a higher kappa value was assigned to the pixel in the final classified map. The results were compared to standard classification techniques: simple unsupervised clustering technique and supervised classification with Feature Analyst. The results indicated higher classification accuracy (75.6%, with kappa value of .6840) for the proposed hybrid classification method than the standard classification techniques: unsupervised clustering technique (68.3%, with kappa value of 0.5904) and supervised classification with Feature Analyst (62.44%, with kappa value of 0.5418). The results were statistically significant at 95% confidence level

Wetland Habitat Studies using various Classification Techniques on Multi-Spectral Landsat Imagery: Case study: Tram chim National Park, Dong Thap Vietnam

Dissertation submitted in partial fulfilment of the requirements for the Degree of Master of Science in Geospatial TechnologiesWetland is one of the most valuable ecological systems in nature. Wetland habitat is a set of comprehensive information of wetland distribution, wetland habitat types are essential to wetland management programs. Maps of wetland should provide sufficient detail, retain an appropriate scale and be useful for further mapping and inventory work (Queensland wetland framework). Remotely sensed image classification techniques are useful to detect vegetation patterns and species combination in the inaccessible regions. Automated classification procedures are conducted to save the time of the research. The purpose of the research was to develop a hierarchical classification approach that effectively integrate ancillary information into the classification process and combines ISODATA (iterative self-organizing data analysis techniques algorithm) clustering, Maximum likelihood and rule-based classifier. The main goal was to find out the best possible combination or sequence of classifiers for typically classifying wetland habitat types yields higher accuracy than the existing classified wetland map from Landsat ETM data. Three classification schemes were introduced to delineate the wetland habitat types in the idea of comparison among the methods. The results showed the low accuracy of different classification schemes revealing the fact that image classification is still on the way toward a fine proper procedure to get high accuracy result with limited effort to make the investigation on sites. Even though the motivation of the research was to apply an appropriate procedure with acceptable accuracy of classified map image, the results did not achieve a higher accuracy on knowledge-based classification method as it was expected. The possible reasons are the limitation of the image resolution, the ground truth data requirements, and the difficulties of building the rules based on the spectral characteristics of the objects which contain high mix of spectral similarities

Integrating Remote Sensing and Geographic Information Systems

Remote sensing and geographic information systems (GIS) comprise the two major components of geographic information science (GISci), an overarching field of endeavor that also encompasses global positioning systems (GPS) technology, geodesy and traditional cartography (Goodchild 1992, Estes and Star 1993, Hepner et al. 2005). Although remote sensing and GIS developed quasi-independently, the synergism between them has become increasingly apparent (Aronoff 2005). Today, GIS software almost always includes tools for display and analysis of images, and image processing software commonly contains options for analyzing ‘ancillary’ geospatial data (Faust 1998). The significant progress made in ‘integration’ of remote sensing and GIS has been well-summarized in several reviews (Ehlers 1990, Mace 1991, Hinton 1996, Wilkinson 1996). Nevertheless, advances are so rapid that periodic reassessment of the state-of-the-art is clearly warranted

Basic research planning in mathematical pattern recognition and image analysis

Fundamental problems encountered while attempting to develop automated techniques for applications of remote sensing are discussed under the following categories: (1) geometric and radiometric preprocessing; (2) spatial, spectral, temporal, syntactic, and ancillary digital image representation; (3) image partitioning, proportion estimation, and error models in object scene interference; (4) parallel processing and image data structures; and (5) continuing studies in polarization; computer architectures and parallel processing; and the applicability of "expert systems" to interactive analysis

Art Neural Networks for Remote Sensing: Vegetation Classification from Landsat TM and Terrain Data

A new methodology for automatic mapping from Landsat Thematic Mapper (TM) and terrain data, based on the fuzzy ARTMAP neural network, is developed. System capabilities are tested on a challenging remote sensing classification problem, using spectral and terrain features for vegetation classification in the Cleveland National Forest. After training at the pixel level, system performance is tested at the stand level, using sites not seen during training. Results are compared to those of maximum likelihood classifiers, as well as back propagation neural networks and K Nearest Neighbor algorithms. ARTMAP dynamics are fast, stable, and scalable, overcoming common limitations of back propagation, which did not give satisfactory performance. Best results are obtained using a hybrid system based on a convex combination of fuzzy ARTMAP and maximum likelihood predictions. A prototype remote sensing example introduces each aspect of data processing and fuzzy ARTMAP classification. The example shows how the network automatically constructs a minimal number of recognition categories to meet accuracy criteria. A voting strategy improves prediction and assigns confidence estimates by training the system several times on different orderings of an input set.National Science Foundation (IRI 94-01659, SBR 93-00633); Office of Naval Research (N00014-95-l-0409, N00014-95-0657

An intelligent classification system for land use and land cover mapping using spaceborne remote sensing and GIS

The objectives of this study were to experiment with and extend current methods of Synthetic Aperture Rader (SAR) image classification, and to design and implement a prototype intelligent remote sensing image processing and classification system for land use and land cover mapping in wet season conditions in Bangladesh, which incorporates SAR images and other geodata. To meet these objectives, the problem of classifying the spaceborne SAR images, and integrating Geographic Information System (GIS) data and ground truth data was studied first. In this phase of the study, an extension to traditional techniques was made by applying a Self-Organizing feature Map (SOM) to include GIS data with the remote sensing data during image segmentation. The experimental results were compared with those of traditional statistical classifiers, such as Maximum Likelihood, Mahalanobis Distance, and Minimum Distance classifiers. The performances of the classifiers were evaluated in terms of the classification accuracy with respect to the collected real-time ground truth data. The SOM neural network provided the highest overall accuracy when a GIS layer of land type classification (with respect to the period of inundation by regular flooding) was used in the network. Using this method, the overall accuracy was around 15% higher than the previously mentioned traditional classifiers. It also achieved higher accuracies for more classes in comparison to the other classifiers. However, it was also observed that different classifiers produced better accuracy for different classes. Therefore, the investigation was extended to consider Multiple Classifier Combination (MCC) techniques, which is a recently emerging research area in pattern recognition. The study has tested some of these techniques to improve the classification accuracy by harnessing the goodness of the constituent classifiers. A Rule-based Contention Resolution method of combination was developed, which exhibited an improvement in the overall accuracy of about 2% in comparison to its best constituent (SOM) classifier. The next phase of the study involved the design of an architecture for an intelligent image processing and classification system (named ISRIPaC) that could integrate the extended methodologies mentioned above. Finally, the architecture was implemented in a prototype and its viability was evaluated using a set of real data. The originality of the ISRIPaC architecture lies in the realisation of the concept of a complete system that can intelligently cover all the steps of image processing classification and utilise standardised metadata in addition to a knowledge base in determining the appropriate methods and course of action for the given task. The implemented prototype of the ISRIPaC architecture is a federated system that integrates the CLIPS expert system shell, the IDRISI Kilimanjaro image processing and GIS software, and the domain experts' knowledge via a control agent written in Visual C++. It starts with data assessment and pre-processing and ends up with image classification and accuracy assessment. The system is designed to run automatically, where the user merely provides the initial information regarding the intended task and the source of available data. The system itself acquires necessary information about the data from metadata files in order to make decisions and perform tasks. The test and evaluation of the prototype demonstrates the viability of the proposed architecture and the possibility of extending the system to perform other image processing tasks and to use different sources of data. The system design presented in this study thus suggests some directions for the development of the next generation of remote sensing image processing and classification systems

High-Resolution Satellite Imagery Classification for Urban Form Detection

Mapping urban form at regional and local scales is a crucial task for discerning the influence of urban expansion upon the ecosystem and the surrounding environment. Remotely sensed imagery is ideally used to monitor and detect urban areas that occur frequently as a consequence of incessant urbanization. It is a lengthy process to convert satellite imagery into urban form map using the existing methods of manual interpretation and parametric image classification digitally. In this work, classification techniques of high-resolution satellite imagery were used to map 50 selected cities of study of the National Urban System in Mexico, during 2015–2016. In order to process the information, 140 RapidEye Ortho Tile multispectral satellite imageries with a pixel size of 5 m were downloaded, divided into 5 × 5 km tiles and then 639 tiles were generated. In each (imagery or tile), classification methods were tested, such as: artificial neural networks (RNA), support vector machines (MSV), decision trees (AD), and maximum likelihood (MV); after tests, urban and nonurban categories were obtained. The result is validated with an accuracy method that follows a stratified random sampling of 16 points for each tile. It is expected that these results can be used in the construction of spatial metrics that explain the differences in the Mexican urban areas

The role of earth observation in an integrated deprived area mapping “system” for low-to-middle income countries

Urbanization in the global South has been accompanied by the proliferation of vast informal and marginalized urban areas that lack access to essential services and infrastructure. UN-Habitat estimates that close to a billion people currently live in these deprived and informal urban settlements, generally grouped under the term of urban slums. Two major knowledge gaps undermine the efforts to monitor progress towards the corresponding sustainable development goal (i.e., SDG 11—Sustainable Cities and Communities). First, the data available for cities worldwide is patchy and insufficient to differentiate between the diversity of urban areas with respect to their access to essential services and their specific infrastructure needs. Second, existing approaches used to map deprived areas (i.e., aggregated household data, Earth observation (EO), and community-driven data collection) are mostly siloed, and, individually, they often lack transferability and scalability and fail to include the opinions of different interest groups. In particular, EO-based-deprived area mapping approaches are mostly top-down, with very little attention given to ground information and interaction with urban communities and stakeholders. Existing top-down methods should be complemented with bottom-up approaches to produce routinely updated, accurate, and timely deprived area maps. In this review, we first assess the strengths and limitations of existing deprived area mapping methods. We then propose an Integrated Deprived Area Mapping System (IDeAMapS) framework that leverages the strengths of EO- and community-based approaches. The proposed framework offers a way forward to map deprived areas globally, routinely, and with maximum accuracy to support SDG 11 monitoring and the needs of different interest groups

Utilizing the Landsat spectral-temporal domain for improved mapping and monitoring of ecosystem state and dynamics

Just as the carbon dioxide observations that form the Keeling curve revolutionized the study of the global carbon cycle, free and open access to all available Landsat imagery is fundamentally changing how the Landsat record is being used to study ecosystems and ecological dynamics. This dissertation advances the use of Landsat time series for visualization, classification, and detection of changes in terrestrial ecological processes. More specifically, it includes new examples of how complex ecological patterns manifest in time series of Landsat observations, as well as novel approaches for detecting and quantifying these patterns. Exploration of the complexity of spectral-temporal patterns in the Landsat record reveals both seasonal variability and longer-term trajectories difficult to characterize using conventional bi-temporal or even annual observations. These examples provide empirical evidence of hypothetical ecosystem response functions proposed by Kennedy et al. (2014). Quantifying observed seasonal and phenological differences in the spectral reflectance of Massachusetts’ forest communities by combining existing harmonic curve fitting and phenology detection algorithms produces stable feature sets that consistently out-performed more traditional approaches for detailed forest type classification. This study addresses the current lack of species-level forest data at Landsat resolutions, demonstrating the advantages of spectral-temporal features as classification inputs. Development of a targeted change detection method using transformations of time series data improves spatial and temporal information on the occurrence of flood events in landscapes actively modified by recovering North American beaver (Castor canadensis) populations. These results indicate the utility of the Landsat record for the study of species-habitat relationships, even in complex wetland environments. Overall, this dissertation confirms the value of the Landsat archive as a continuous record of terrestrial ecosystem state and dynamics. Given the global coverage of remote sensing datasets, the time series visualization and analysis approaches presented here can be extended to other areas. These approaches will also be improved by more frequent collection of moderate resolution imagery, as planned by the Landsat and Sentinel-2 programs. In the modern era of global environmental change, use of the Landsat spectral-temporal domain presents new and exciting opportunities for the long-term large-scale study of ecosystem extent, composition, condition, and change