Cache Equalizer: A Cache Pressure Aware Block Placement Scheme for Large-Scale Chip Multiprocessors

This paper describes Cache Equalizer (CE), a novel distributed cache management scheme for large scale chip multiprocessors (CMPs). Our work is motivated by large asymmetry in cache sets usages. CE decouples the physical locations of cache blocks from their addresses for the sake of reducing misses caused by destructive interferences. Temporal pressure at the on-chip last-level cache, is continuously collected at a group (comprised of cache sets) granularity, and periodically recorded at the memory controller to guide the placement process. An incoming block is consequently placed at a cache group that exhibits the minimum pressure. CE provides Quality of Service (QoS) by robustly offering better performance than the baseline shared NUCA cache. Simulation results using a full-system simulator demonstrate that CE outperforms shared NUCA caches by an average of 15.5% and by as much as 28.5% for the benchmark programs we examined. Furthermore, evaluations manifested the outperformance of CE versus related CMP cache designs

Adaptive memory hierarchies for next generation tiled microarchitectures

Les últimes dècades el rendiment dels processadors i de les memòries ha millorat a diferent ritme, limitant el rendiment dels processadors i creant el conegut memory gap. Sol·lucionar aquesta diferència de rendiment és un camp d'investigació d'actualitat i que requereix de noves sol·lucions. Una sol·lució a aquest problema són les memòries “cache”, que permeten reduïr l'impacte d'unes latències de memòria creixents i que conformen la jerarquia de memòria. La majoria de d'organitzacions de les “caches” estan dissenyades per a uniprocessadors o multiprcessadors tradicionals. Avui en dia, però, el creixent nombre de transistors disponible per xip ha permès l'aparició de xips multiprocessador (CMPs). Aquests xips tenen diferents propietats i limitacions i per tant requereixen de jerarquies de memòria específiques per tal de gestionar eficientment els recursos disponibles. En aquesta tesi ens hem centrat en millorar el rendiment i la eficiència energètica de la jerarquia de memòria per CMPs, des de les “caches” fins als controladors de memòria. A la primera part d'aquesta tesi, s'han estudiat organitzacions tradicionals per les “caches” com les privades o compartides i s'ha pogut constatar que, tot i que funcionen bé per a algunes aplicacions, un sistema que s'ajustés dinàmicament seria més eficient. Tècniques com el Cooperative Caching (CC) combinen els avantatges de les dues tècniques però requereixen un mecanisme centralitzat de coherència que té un consum energètic molt elevat. És per això que en aquesta tesi es proposa el Distributed Cooperative Caching (DCC), un mecanisme que proporciona coherència en CMPs i aplica el concepte del cooperative caching de forma distribuïda. Mitjançant l'ús de directoris distribuïts s'obté una sol·lució més escalable i que, a més, disposa d'un mecanisme de marcatge més flexible i eficient energèticament. A la segona part, es demostra que les aplicacions fan diferents usos de la “cache” i que si es realitza una distribució de recursos eficient es poden aprofitar els que estan infrautilitzats. Es proposa l'Elastic Cooperative Caching (ElasticCC), una organització capaç de redistribuïr la memòria “cache” dinàmicament segons els requeriments de cada aplicació. Una de les contribucions més importants d'aquesta tècnica és que la reconfiguració es decideix completament a través del maquinari i que tots els mecanismes utilitzats es basen en estructures distribuïdes, permetent una millor escalabilitat. ElasticCC no només és capaç de reparticionar les “caches” segons els requeriments de cada aplicació, sinó que, a més a més, és capaç d'adaptar-se a les diferents fases d'execució de cada una d'elles. La nostra avaluació també demostra que la reconfiguració dinàmica de l'ElasticCC és tant eficient que gairebé proporciona la mateixa taxa de fallades que una configuració amb el doble de memòria.Finalment, la tesi es centra en l'estudi del comportament de les memòries DRAM i els seus controladors en els CMPs. Es demostra que, tot i que els controladors tradicionals funcionen eficientment per uniprocessadors, en CMPs els diferents patrons d'accés obliguen a repensar com estan dissenyats aquests sistemes. S'han presentat múltiples sol·lucions per CMPs però totes elles es veuen limitades per un compromís entre el rendiment global i l'equitat en l'assignació de recursos. En aquesta tesi es proposen els Thread Row Buffers (TRBs), una zona d'emmagatenament extra a les memòries DRAM que permetria guardar files de dades específiques per a cada aplicació. Aquest mecanisme permet proporcionar un accés equitatiu a la memòria sense perjudicar el seu rendiment global. En resum, en aquesta tesi es presenten noves organitzacions per la jerarquia de memòria dels CMPs centrades en la escalabilitat i adaptativitat als requeriments de les aplicacions. Els resultats presentats demostren que les tècniques proposades proporcionen un millor rendiment i eficiència energètica que les millors tècniques existents fins a l'actualitat.Processor performance and memory performance have improved at different rates during the last decades, limiting processor performance and creating the well known "memory gap". Solving this performance difference is an important research field and new solutions must be proposed in order to have better processors in the future. Several solutions exist, such as caches, that reduce the impact of longer memory accesses and conform the system memory hierarchy. However, most of the existing memory hierarchy organizations were designed for single processors or traditional multiprocessors. Nowadays, the increasing number of available transistors has allowed the apparition of chip multiprocessors, which have different constraints and require new ad-hoc memory systems able to efficiently manage memory resources. Therefore, in this thesis we have focused on improving the performance and energy efficiency of the memory hierarchy of chip multiprocessors, ranging from caches to DRAM memories. In the first part of this thesis we have studied traditional cache organizations such as shared or private caches and we have seen that they behave well only for some applications and that an adaptive system would be desirable. State-of-the-art techniques such as Cooperative Caching (CC) take advantage of the benefits of both worlds. This technique, however, requires the usage of a centralized coherence structure and has a high energy consumption. Therefore we propose the Distributed Cooperative Caching (DCC), a mechanism to provide coherence to chip multiprocessors and apply the concept of cooperative caching in a distributed way. Through the usage of distributed directories we obtain a more scalable solution and, in addition, has a more flexible and energy-efficient tag allocation method. We also show that applications make different uses of cache and that an efficient allocation can take advantage of unused resources. We propose Elastic Cooperative Caching (ElasticCC), an adaptive cache organization able to redistribute cache resources dynamically depending on application requirements. One of the most important contributions of this technique is that adaptivity is fully managed by hardware and that all repartitioning mechanisms are based on distributed structures, allowing a better scalability. ElasticCC not only is able to repartition cache sizes to application requirements, but also is able to dynamically adapt to the different execution phases of each thread. Our experimental evaluation also has shown that the cache partitioning provided by ElasticCC is efficient and is almost able to match the off-chip miss rate of a configuration that doubles the cache space. Finally, we focus in the behavior of DRAM memories and memory controllers in chip multiprocessors. Although traditional memory schedulers work well for uniprocessors, we show that new access patterns advocate for a redesign of some parts of DRAM memories. Several organizations exist for multiprocessor DRAM schedulers, however, all of them must trade-off between memory throughput and fairness. We propose Thread Row Buffers, an extended storage area in DRAM memories able to store a data row for each thread. This mechanism enables a fair memory access scheduling without hurting memory throughput. Overall, in this thesis we present new organizations for the memory hierarchy of chip multiprocessors which focus on the scalability and of the proposed structures and adaptivity to application behavior. Results show that the presented techniques provide a better performance and energy-efficiency than existing state-of-the-art solutions

Parallel Architectures for Planetary Exploration Requirements (PAPER)

The Parallel Architectures for Planetary Exploration Requirements (PAPER) project is essentially research oriented towards technology insertion issues for NASA's unmanned planetary probes. It was initiated to complement and augment the long-term efforts for space exploration with particular reference to NASA/LaRC's (NASA Langley Research Center) research needs for planetary exploration missions of the mid and late 1990s. The requirements for space missions as given in the somewhat dated Advanced Information Processing Systems (AIPS) requirements document are contrasted with the new requirements from JPL/Caltech involving sensor data capture and scene analysis. It is shown that more stringent requirements have arisen as a result of technological advancements. Two possible architectures, the AIPS Proof of Concept (POC) configuration and the MAX Fault-tolerant dataflow multiprocessor, were evaluated. The main observation was that the AIPS design is biased towards fault tolerance and may not be an ideal architecture for planetary and deep space probes due to high cost and complexity. The MAX concepts appears to be a promising candidate, except that more detailed information is required. The feasibility for adding neural computation capability to this architecture needs to be studied. Key impact issues for architectural design of computing systems meant for planetary missions were also identified

Adaptive memory-side last-level GPU caching

Emerging GPU applications exhibit increasingly high computation demands which has led GPU manufacturers to build GPUs with an increasingly large number of streaming multiprocessors (SMs). Providing data to the SMs at high bandwidth puts significant pressure on the memory hierarchy and the Network-on-Chip (NoC). Current GPUs typically partition the memory-side last-level cache (LLC) in equally-sized slices that are shared by all SMs. Although a shared LLC typically results in a lower miss rate, we find that for workloads with high degrees of data sharing across SMs, a private LLC leads to a significant performance advantage because of increased bandwidth to replicated cache lines across different LLC slices. In this paper, we propose adaptive memory-side last-level GPU caching to boost performance for sharing-intensive workloads that need high bandwidth to read-only shared data. Adaptive caching leverages a lightweight performance model that balances increased LLC bandwidth against increased miss rate under private caching. In addition to improving performance for sharing-intensive workloads, adaptive caching also saves energy in a (co-designed) hierarchical two-stage crossbar NoC by power-gating and bypassing the second stage if the LLC is configured as a private cache. Our experimental results using 17 GPU workloads show that adaptive caching improves performance by 28.1% on average (up to 38.1%) compared to a shared LLC for sharing-intensive workloads. In addition, adaptive caching reduces NoC energy by 26.6% on average (up to 29.7%) and total system energy by 6.1% on average (up to 27.2%) when configured as a private cache. Finally, we demonstrate through a GPU NoC design space exploration that a hierarchical two-stage crossbar is both more power- and area-efficient than full and concentrated crossbars with the same bisection bandwidth, thus providing a low-cost cooperative solution to exploit workload sharing behavior in memory-side last-level caches

Introducing a Data Sliding Mechanism for Cooperative Caching in Manycore Architectures

International audienceIn this paper, we propose a new cooperative caching method improving the cache miss rate for manycore micro- architec- tures. The work is motivated by some limitations of recent adaptive cooperative caching proposals. Elastic Cooperative caching (ECC), is a dynamic memory partitioning mechanism that allows sharing cache across cooperative nodes according to the application behavior. However, it is mainly limited with cache eviction rate in case of highly stressed neighbor- hood. Another system, the adaptive Set-Granular Cooperative Caching (ASCC), is based on finer set-based mechanisms for a better adaptability. However, heavy localized cache loads are not efficiently managed. In such a context, we propose a cooperative caching strategy that consists in sliding data through closer neighbors. When a cache receives a storing request of a neighbor's private block, it spills the least recently used private data to a close neighbor. Thus, solicited saturated nodes slide local blocks to their respective neighbors to always provide free cache space. We also propose a new Priority- based Data Replacement policy to decide efficiently which blocks should be spilled, and a new mechanism to choose host destination called Best Neighbor selector. The first analytic performance evaluation shows that the proposed cache management policies reduce by half the average global communication rate. As frequent accesses are focused in the neighboring zones, it efficiently improves on-Chip traffic. Finally, our evaluation shows that cache miss rate is en- hanced: each tile keeps the most frequently accessed data 1- Hop close to it, instead of ejecting them Off-Chip. Proposed techniques notably reduce the cache miss rate in case of high solicitation of the cooperative zone, as it is shown in the performed experiments

Shared versus distributed memory multiprocessors

The question of whether multiprocessors should have shared or distributed memory has attracted a great deal of attention. Some researchers argue strongly for building distributed memory machines, while others argue just as strongly for programming shared memory multiprocessors. A great deal of research is underway on both types of parallel systems. Special emphasis is placed on systems with a very large number of processors for computation intensive tasks and considers research and implementation trends. It appears that the two types of systems will likely converge to a common form for large scale multiprocessors

Hybrid Caching for Chip Multiprocessors Using Compiler-Based Data Classification

The high performance delivered by modern computer system keeps scaling with an increasingnumber of processors connected using distributed network on-chip. As a result, memory accesslatency, largely dominated by remote data cache access and inter-processor communication, is becoming a critical performance bottleneck. To release this problem, it is necessary to localize data access as much as possible while keep efficient on-chip cache memory utilization. Achieving this however, is application dependent and needs a keen insight into the memory access characteristics of the applications. This thesis demonstrates how using fairly simple thus inexpensive compiler analysis memory accesses can be classified into private data access and shared data access. In addition, we introduce a third classification named probably private access and demonstrate the impact of this category compared to traditional private and shared memory classification. The memory access classification information from the compiler analysis is then provided to the runtime system through a modified memory allocator and page table to facilitate a hybrid private-shared caching technique. The hybrid cache mechanism is aware of different data access classification and adopts appropriate placement and search policies accordingly to improve performance. Our analysis demonstrates that many applications have a significant amount of both private and shared data and that compiler analysis can identify the private data effectively for many applications. Experimentsresults show that the implemented hybrid caching scheme achieves 4.03% performance improvement over state of the art NUCA-base caching

Using the Spring Physical Model to Extend a Cooperative Caching Protocol for Many-Core Processors

International audienceAs the number of embedded cores grows up, the off-chip memory wall becomes an overwhelming bottleneck. As a consequence, it is more and more prevalent to efficiently exploit on-chip data storage. In a previous work, we proposed a data sliding mechanism that allows to store data onto our closest neighborhood, even under heavy stress loads. However, each cache block is allowed to migrate only one time to a neighbor's cache (e.g. 1-Chance Forwarding). In this paper, we propose an extension of our mechanism in order to expand the cooperative caching area. Our work is based on an adaptive physical model, where each cache block is considered as a mass connected to a spring. This technique constrains data migration according to the spring constant and the difference of work-loads between cores. This adaptive data sliding approach leads to a balanced spread of data on the chip and therefore improves on-chip storage. On-chip data access has been evaluated using an analytical approach. Results show that the extended data sliding increases the global cache hit rate on the chip, especially in the context of juxtaposed hot spots

Hardware-Oriented Cache Management for Large-Scale Chip Multiprocessors

One of the key requirements to obtaining high performance from chip multiprocessors (CMPs) is to effectively manage the limited on-chip cache resources shared among co-scheduled threads/processes. This thesis proposes new hardware-oriented solutions for distributed CMP caches. Computer architects are faced with growing challenges when designing cache systems for CMPs. These challenges result from non-uniform access latencies, interference misses, the bandwidth wall problem, and diverse workload characteristics. Our exploration of the CMP cache management problem suggests a CMP caching framework (CC-FR) that defines three main approaches to solve the problem: (1) data placement, (2) data retention, and (3) data relocation. We effectively implement CC-FR's components by proposing and evaluating multiple cache management mechanisms.Pressure and Distance Aware Placement (PDA) decouples the physical locations of cache blocks from their addresses for the sake of reducing misses caused by destructive interferences. Flexible Set Balancing (FSB), on the other hand, reduces interference misses via extending the life time of cache lines through retaining some fraction of the working set at underutilized local sets to satisfy far-flung reuses. PDA implements CC-FR's data placement and relocation components and FSB applies CC-FR's retention approach.To alleviate non-uniform access latencies and adapt to phase changes in programs, Adaptive Controlled Migration (ACM) dynamically and periodically promotes cache blocks towards L2 banks close to requesting cores. ACM lies under CC-FR's data relocation category. Dynamic Cache Clustering (DCC), on the other hand, addresses diverse workload characteristics and growing non-uniform access latencies challenges via constructing a cache cluster for each core and expands/contracts all clusters synergistically to match each core's cache demand. DCC implements CC-FR's data placement and relocation approaches. Lastly, Dynamic Pressure and Distance Aware Placement (DPDA) combines PDA and ACM to cooperatively mitigate interference misses and non-uniform access latencies. Dynamic Cache Clustering and Balancing (DCCB), on the other hand, combines DCC and FSB to employ all CC-FR's categories and achieve higher system performance. Simulation results demonstrate the effectiveness of the proposed mechanisms and show that they compare favorably with related cache designs

Mixing multi-core CPUs and GPUs for scientific simulation software

Recent technological and economic developments have led to widespread availability of multi-core CPUs and specialist accelerator processors such as graphical processing units (GPUs). The accelerated computational performance possible from these devices can be very high for some applications paradigms. Software languages and systems such as NVIDIA's CUDA and Khronos consortium's open compute language (OpenCL) support a number of individual parallel application programming paradigms. To scale up the performance of some complex systems simulations, a hybrid of multi-core CPUs for coarse-grained parallelism and very many core GPUs for data parallelism is necessary. We describe our use of hybrid applica- tions using threading approaches and multi-core CPUs to control independent GPU devices. We present speed-up data and discuss multi-threading software issues for the applications level programmer and o er some suggested areas for language development and integration between coarse-grained and ne-grained multi-thread systems. We discuss results from three common simulation algorithmic areas including: partial di erential equations; graph cluster metric calculations and random number generation. We report on programming experiences and selected performance for these algorithms on: single and multiple GPUs; multi-core CPUs; a CellBE; and using OpenCL. We discuss programmer usability issues and the outlook and trends in multi-core programming for scienti c applications developers