Polymer Optical Fiber (POF) for In-House-Networks using Lower Girth Transmission System

The Plastic Optical Fiber strives to actively promote the proliferation of Polymer Optical Fiber (POF) systems serving both data communication and non-data markets.  Single mode silica optical fiber has already established as undisputable position in core telecommunication networks and has reached Tbits/s throughputs. When optical fiber approaches the user's residence, even enters his home, the costs of installing and maintain become even more important. The Use of POF will be an attractive solution for future broadband CPN. Present systems work with 650 nm sources. In This Research I have proposed the use of 520 nm InGaN LED and will show advantages and open problems. The paper will present the present status of POF systems, based on 650 nm components. The ATM Forum specifies a link with a capacity of 155 Mbps and 50 m reach. For a number of applications it would be helpful to improve this system in the direction of a longer reach and/or more system margin in the power budget

Chapter Multimode Graded-Index Optical Fibers for Next-Generation Broadband Access

Applied optic

Multimode Graded-Index Optical Fibers for Next-Generation Broadband Access

Publicad

Optical fiber transmission systems for in-door next generation broadband access network.

This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University London.This thesis investigates the generation and radio-over-fibre (RoF) transport of unlicensed 60 GHz millimetre-wave (mm-wave) frequency band. The investigated benefits of transmission schemes applicable for the mm-wave generation include optical carrier suppression (OCS), optical frequency multiplication (OFM) and remote heterodyne detection (RHD). For the in-door cabling of the mm-wave transmission, a low-cost polymer optical fibre (POF) along with bend-insensitive single mode fibre (BI-SMF) has been investigated for short-range networks. Transporting mm-wave generated signals over POF and BI-SMF cables based on OCS scheme showed results with the highest spectral efficiency and least inter-symbol interference over a 2.5 Gbit/s data delivery. Based on this thesis analysis, OCS simulation of POF showed the most reliable power penalty performance and receiver sensitivity at 30-m whilst the BI-SMF fiber produced equal observations at 150-m and more. In observing the free space links of delivering the RoF signal, the attenuation on the received signal power for both POF and BI-SMF was insignificant but expected, as the simulation assumed complete and total collimation of the light beams onto the aperture of the photodetector. OCS scheme for mm-wave generation and transport was explored based on the cost effectiveness of using one external modulator compared to other generation schemes that utilised more than one external modulator. OFM scheme was simulated to transport LTE and Wi-Fi signals along with 60 GHz RF band through both SMF and MMF-POF/BI-SMF cables. OFM transport scheme produced the highest attenuation on LTE, Wi-Fi and mm-wave signals carrying 100 Mbit/s data as simulated POF lengths increased. The best performance POF length was observed at 10-m. The application of offset launch technique at the coupling of SMF and POF showed insignificant improvement on signal bandwidth. The free space OFM transmission also demonstrated negligible change to the received signal power. This reinforces the attributes of deploying OWC system in an in-door environment. In other investigation, the simulated successful delivery of mm-wave signal using RHD scheme modulated and transported 10 Gbit/s data signal over POF and BI-SMF cables. Additional observed unrecorded result also showed BI-SMF cable maintained a 2% reduction of received power for 450-m fiber cable from 150-m. The attributes to RHD includes its low operating power system application and delivery of localised 60 GHz signal for uplink RoF transmission. The conceptualised design of Gigabit data delivery for indoor customer applications either through POF or BI-SMF cable, transporting various wireless channels has been presented in this thesis for the design of a robust next generation Broadband access network to reinforce the fiber-inside-the-home (FiTH) deployment

Plastic Optical Fiber Technology for Reliable Home Networking: Overview and Results of the EU Project POF-ALL

The rising performance of broadband connections for residential users, particularly in conjunction with fiber to the home, will present a new challenge for telecom operators in the short and medium terms: how to deliver the high bit rate digital signals with high quality-of-service to all consumer devices scattered inside the building of final users? Among the many different solutions for the home network, we review in this article the use of polymer optical fibers for short-reach and high-capacity optical communications for residential customer premises. POF is an easy-to-install, low-cost, and eye-safe solution for these networks, with the potential of being future-proof. In this article the state of the art in POF technology is presented by summarizing significant results achieved in the European project POF-ALL. Data transmission rates of more than 1 Gb/s over 50+ m and 100 Mb/s over 200+ m of standard step-index POF have been show

Optical techniques for broadband in-building networks

Optical fibres, which can easily handle any bandwidth demand, have been rolled out to more than 32 million consumer’s homes and professional buildings worldwide up to 2010. The basic technological and economical challenges of fibre-to-the-home (FTTH) has been solved. The current FTTH technology can now providing baseband Gbit Ethernet and high definition TV services to the gates of homes. Thus, the bottleneck for delivery of broadband services to the end users is shifting from the access network to the in-building network. In the meantime, the need for high-capacity transmission between devices inside the building, e.g. between desktop PC and data services, are also rapidly increase. How to bring high bandwidth to the mobile terminals such as laptops, PDAs or cell phones as well as to the fixed terminals such as desktop PCs and HDTV equipment in an all-in-one network infrastructure is a challenge we are facing. Building on the flexibility of the wireless access networks and the latent vast bandwidth of a fibre infrastructure, radio-over-fibre (RoF) techniques have been proposed as a cost-effective solution to the future integrated broadband services in in-building networks. This thesis investigates techniques to deliver high data rate wireless services via in-building networks: high capacity RoF links employing optical frequency multiplication (OFM) and sub-carrier multiplexing (SCM) techniques, with single- or multi-carrier signal formats. The orthogonal frequency division multiplexing (OFDM) format is investigated for the RoF transmission system, particularly with regard to the optical system nonlinearity. For low-cost short-range optical backbone networks, RoF transmission over large-core diameter plastic optical fibre (POF) links has been studied, including the transmission of the WiMedia-compliant multiband OFDM UWB signal over bandwidth-limited large-core POF as well as a full-duplex bi-directional UWB transmission over POF. In order to improve the functionalities for delivery of wireless services of in-building networks, techniques to introduce flexibility into the network architecture and to create dynamic capacity allocation have been investigated. By employing optical switching techniques based on optical semiconductor amplifiers (SOA), an optically routed RoF system has been studied. The dynamic capacity allocation is addressed by investigating one-dimensional and two-dimensional routing using electrical SCM and optical wavelengths. In addition, next to RoF networking, this thesis explores techniques for wired delivery of baseband high capacity services over POF links by employing a multi-level signal modulation format, in particular discrete multi-tone (DMT) modulation. Transmission of 10 Gbit/s data over 1 mm core diameter PMMA POF links is demonstrated, as a competitor to more expensive fibre solutions such as silica single and multimode fibre. A record transmission rate of more than 40 Gbit/s is presented for POF whose core diameter is comparable with silica multimode fibre. Finally, from the network perspective, the convergence of wired and wireless multi-standard services into a single fibre-based infrastructure has been studied. Techniques have been designed and demonstrated for in-building networks, which can convey both high capacity baseband services and broadband radio frequency (RF) services over a POF backbone link. The multi-standard RoF signals carry different wireless services at different radio frequencies and with different bandwidths, including WiFi, WiMax, UMTS and UWB. System setups to carry them together over the same multimode optical fibre based network have been designed and experimentally shown. All the concepts, designs and system experiments presented in this thesis underline the strong potential of multimode (silica and plastic) optical fibre techniques for the delivery of broadband services to wired and wireless devices in in-building networks, in order to extend to the end user the benefits of the broadband FTTH networks which are being installed and deployed worldwide

Comunicações avançadas com fibra óptica plástica

Nowadays, fiber to the Home/Curb/Building/Cabinet (FTTx) services that interconnect homes with a standard glass optical fiber cables to the core/access optical networks have brought the optical fiber at the doorsteps of our homes. However, the last few miles in home access network is still based on the limited bandwidth electronic component which supports by the cooper wires e.g. Cat-5, 6. The rapid growth of personal smart/mobile electronic devices with new developments such as video on demand, High Definition (HD) and three-Dimension (3D) television (TV), cloud computing, video conferences, etc. has been proposed new challenges for the next generation high bandwidth demand required for subscribers in home access network. In order to meet the more demanding expectations of the end user with new developments, it is necessary to improve the physical infrastructure of the existing in home networks in order to obtain the best ratio between quality of service and price of implementation. Plastic optical fibers (POFs) are point out as a promising transmission medium for short-range communication in compare to the “classic” single/multimode glass optical fibers and current cooper wire technology developments. The main advantages of POF are its easy to install, easy splicing and the possibility of using low cost optical transceivers, capability of being robust, and immunity to electromagnetic noise interference. However, the benefits of large-core POFs come at the expense of a less bandwidth and a higher attenuation than silica-based solution. The main objective of this doctoral dissertation is to explore the possibilities and develop low cost, short reach, high data rate POF-links for in home networks applications. This thesis investigates the use of multilevel modulation in particular, pulse amplitude modulation (PAM in combination of the receiver equalizer in order to overcome the bandwidth limitations of the graded index POFs. The possibility of the using multiple channels over a single fiber to increase the capacity of POF systems using commercially available multimode components is also analyzed in this dissertation. Moreover, a low cost Digitised radio signal over plastic fiber system is proposed and evaluated to deliver digital baseband data for wireline and wireless users in home access network. The deployment will be specified in terms of performance, maximum rates and any degradation that might appear in the network. Furthermore, the possibilities of the microstructured fibers in telecommunication application will be studied with main emphasis on their structural design. The photonic crystal fibers made of different highly nonlinear materials with different structures are optimized to achieve ultra-flat dispersion, high nonlinearity and low confinement loss over a broad range of wavelengths in the perspective of their usage in telecommunication applications.Hoje em dia, a possibilidade de a fibra óptica até casa (FTTH) para a transmissão simultânea de diferentes serviços como internet, telefone, televisão digital é uma realidade. No entanto, para satisfazer as expectativas mais exigentes do usuário final com novos desenvolvimentos, tais como vídeo sob demanda, de alta definição (HD) e tridimensional (3D) de televisão (TV), computação em nuvem, vídeo conferências, etc., é necessário melhorar a infra-estrutura física da existente em redes domésticas, a fim de obter a melhor relação entre a qualidade do serviço e preço de implementação. Fibra óptica de plástico (POF) é considerada um meio de transmissão promissor para comunicações de curto alcance, queando comparadas com a clássica fibra óptica de silica (tanto monomodo como multimodo) e com as tecnologias atuais baseadas em fio de cobre. As principais vantagens da POF encontramse na sua facilidade de instalação e conecção, possibilidade de uso de fontes e detectores de baixo custo, robustez e imunidade electromagnética. No entanto, o uso da POF de elevado diâmetro têm também desvantagens uma vez que esta oferece uma menor largura de banda e uma atenuação superior à fibra de sílica convêncional. Esta dissertação de doutoramento tem como principal objetivo explorar as possibilidades de desemvolvimento de componentes de baixo custo baseados em POF para redes de curto alcance, com alta taxa de transmisssão de dados. Esta tese investiga a utilização de vários formatos de modulação combinados com equalizador e receptor, de maneira a superar as limitações de largura de banda em sistemas de comunicação óptica de curto alcance. Em particular, a modulação em amplitude de impulso (PAM) é proposta e investigada a fim de aumentar a capacidade de tais sistemas. Além disso, a possibilidade de usar múltiplos canais, utilizando uma única fibra óptica, também conhecido por multiplexagem por divisão de comprimento de onda (WDM), será analisada neste trabalho. A viabilidade das tecnologias de redes de acesso tanto a nível individual como em sistemas WDM serão analisadas usando componentes multimodo disponíveis comercialmente. A implementação será especificada em termos de desempenho tanto a nível da taxas máximas de transmissão, bem como na degradação do sinal que possa ocorrer na rede. No capitulo 5 desta dissertação é apresentado sistema de radio através de fibra. Este tipo de sistemas permite a simplificação das estações base providenciando também uma elevada manutenção de custos. O principal objectivo deste estudo prende-se com a investigação do impacto da amostragem na preformance de digitalização de rádio através de fibra e também como a introdução de fibra óptica de plástico pode afetar o sistema. Além disso, a possibilidade da aplicação de fibras óticas microestruturadas em redes de telecomunicações serão estudadas com ênfase principal na sua concepção estrutural. As fibras de cristal fotônico feitas de diferentes materiais altamente não-lineares com diferentes estruturas serão otimizadas a fim de alcançar uma dispersão ultra-plana, elevada não linearidade e baixa perda de confinamento em uma vasta gama espectral, na perspectiva de seu uso em aplicações de telecomunicações.Programa Doutoral em Engenharia Eletrotécnic

Development of a dc-ac power conditioner for wind generator by using neural network

This project present of development single phase DC-AC converter for wind generator application. The mathematical model of the wind generator and Artificial Neural Network control for DC-AC converter is derived. The controller is designed to stabilize the output voltage of DC-AC converter. To verify the effectiveness of the proposal controller, both simulation and experimental are developed. The simulation and experimental result show that the amplitude of output voltage of the DC-AC converter can be controlled