Flight Dynamics-based Recovery of a UAV Trajectory using Ground Cameras

We propose a new method to estimate the 6-dof trajectory of a flying object such as a quadrotor UAV within a 3D airspace monitored using multiple fixed ground cameras. It is based on a new structure from motion formulation for the 3D reconstruction of a single moving point with known motion dynamics. Our main contribution is a new bundle adjustment procedure which in addition to optimizing the camera poses, regularizes the point trajectory using a prior based on motion dynamics (or specifically flight dynamics). Furthermore, we can infer the underlying control input sent to the UAV's autopilot that determined its flight trajectory. Our method requires neither perfect single-view tracking nor appearance matching across views. For robustness, we allow the tracker to generate multiple detections per frame in each video. The true detections and the data association across videos is estimated using robust multi-view triangulation and subsequently refined during our bundle adjustment procedure. Quantitative evaluation on simulated data and experiments on real videos from indoor and outdoor scenes demonstrates the effectiveness of our method

Development and Testing of a Self-Contained, Portable Instrumentation System for a Fighter Pilot Helmet

A self-contained, portable, inertial and positional measurement system was developed and tested for an HGU-55 model fighter pilot helmet. The system, designated the Portable Helmet Instrumentation System (PHIS), demonstrated the recording of accelerations and rotational rates experienced by the human head in a flight environment. A compact, self-contained, “knee-board” sized computer recorded these accelerations and rotational rates during flight. The present research presents the results of a limited evaluation of this helmet-mounted instrumentation system flown in an Extra 300 fully aerobatic aircraft. The accuracy of the helmet-mounted, inertial head tracker system was compared to the aircraft-mounted referenced system. The ability of the Portable Helmet Instrumentation System to record position, orientation and inertial information in ground and flight conditions was evaluated. The capability of the Portable Helmet Instrumentation System to provide position, orientation and inertial information with sufficient fidelity was evaluated. The concepts demonstrated in this system are: 1) calibration of the inertial sensing element without external equipment 2) the use of differential inertial sensing equipment to remove the accelerations and rotational rates of a moving vehicle from the pilot’s head-tracking measurements 3) the determination of three-dimensional position and orientation from three corresponding points using a range sensor. The range sensor did not operate as planned. The helmet only managed to remain within the range sensor’s field of view for 37% of flight time. Vertical accelerations showed the greatest correlation when comparing helmet measurements to aircraft measurements. The PHIS operated well during level flight

A pilot study on discriminative power of features of superficial venous pattern in the hand

The goal of the project is to develop an automatic way to identify, represent the superficial vasculature of the back hand and investigate its discriminative power as biometric feature. A prototype of a system that extracts the superficial venous pattern of infrared images of back hands will be described. Enhancement algorithms are used to solve the lack of contrast of the infrared images. To trace the veins, a vessel tracking technique is applied, obtaining binary masks of the superficial venous tree. Successively, a method to estimate the blood vessels calibre, length, the location and angles of vessel junctions, will be presented. The discriminative power of these features will be studied, independently and simultaneously, considering two features vector. Pattern matching of two vasculature maps will be performed, to investigate the uniqueness of the vessel network / L’obiettivo del progetto è di sviluppare un metodo automatico per identificare e rappresentare la rete vascolare superficiale presente nel dorso della mano ed investigare sul suo potere discriminativo come caratteristica biometrica. Un prototipo di sistema che estrae l’albero superficiale delle vene da immagini infrarosse del dorso della mano sarà descritto. Algoritmi per il miglioramento del contrasto delle immagini infrarosse saranno applicati. Per tracciare le vene, una tecnica di tracking verrà utilizzata per ottenere una maschera binaria della rete vascolare. Successivamente, un metodo per stimare il calibro e la lunghezza dei vasi sanguigni, la posizione e gli angoli delle giunzioni sarà trattato. Il potere discriminativo delle precedenti caratteristiche verrà studiato ed una tecnica di pattern matching di due modelli vascolari sarà presentata per verificare l’unicità di quest

Detección y evasión de obstáculos usando redes neuronales híbridas convolucionales y recurrentes

[ES] Los términos "detección y evasión" hacen referencia al requerimiento esencial de un piloto para "ver y evitar" colisiones aire-aire. Para introducir UAVs en el día a día, esta funcion del piloto debe ser replicada por el UAV. En pequeños UAVs como pueden ser los destinados a la entrega de pedidos, existen ciertos aspectos limitantes en relación a tamaño, peso y potencia, por lo que sistemas cooperativos como TCAS o ADS-B no pueden ser utilizados y en su lugar otros sistemas como cámaras electro-ópticas son candidatos potenciales para obtener soluciones efectivas. En este tipo de aplicaciones, la solución debe evitar no solo otras aeronaves sino también otros obstáculos que puedan haber cerca de la superficie donde probablemente se operará la mayoría del tiempo. En este proyecto se han utilizado redes neuronales híbridas que incluyen redes neuronales convolucionales como primera etapa para clasificar objetos y redes neuronales recurrentes a continuación para deteminar la secuencia de eventos y actuar consecuentemente. Este tipo de red neuronal es muy actual y no se ha investigado en exceso hasta la fecha, por lo que el principal objetivo del proyecto es estudiar si podrían ser aplicadas en sistemas de "detección y evasión". Algoritmos de acceso libre han sido fusionados y mejorados para crear un nuevo modelo capaz de funcionar en este tipo de aplicaciones. A parte del algoritmo de detección y seguimiento, la parte correspondiente a la evasión de colisiones también fue desarrollada. Un filtro Kalman extendido se utilizó para estimar el rango relativo entre un obstáculo y el UAV. Para obtener una resolución sobre la posibilidad de conflicto, una aproximación estocástica fue considerada. Finalmente, una maniobra de evasión geométrica fue diseñada para utilizar si fuera necesario. Esta segunda parte fue evaluada mediante una simulación que también fue creada para el proyecto. Adicionalmente, un ensayo experimental se llevó a cabo para integrar las dos partes del algoritmo. Datos del ruido de la medida fueron experimentalmente obtenidos y se comprobó que las colisiones se podían evitar satisfactoriamente con dicho valor. Las principales conclusiones fueron que este nuevo tipo funciona más rápido que los métodos basados en redes neuronales más comunes, por lo que se recomiendo seguir investigando en ellas. Con la técnica diseñada, se encuentran disponibles multiples parámetros de diseño que pueden ser adaptados a diferentes circumstancias y factores. Las limitaciones principales encontradas se centran en la detección de obstáculos y en la estimación del rango relativo, por lo que se sugiere que la futura investigación se dirija en estas direcciones.[EN] A Sense and Avoid technique has been developed in this master thesis. A special method for small UAVs which use only an electro-optical camera as the sensor has been considered. This method is based on a sophisticated processing solution using hybrid Convolutional and Recurrent Neural Networks. The aim is to study the feasibility of this kind of neural networks in Sense and Avoid applications. First, the detection and tracking part of the algorithm is presented. Two models were used for this purpose: a Convolutional Neural Network called YOLO and a hybrid Convolutional and Recurrent Neural Network called Re3. After that, the collision avoidance part was designed. This consisted of the obstacle relative range estimation using an Extended Kalman Filter, the conflict probability calculation using an analytical approach and the geometric avoidance manoeuvre generation. Both parts were assessed separately by videos and simulations respectively, and then an experimental test was carried out to integrate them. Measurement noise was experimentally tested and simulations were performed again to check that collisions were avoided with the considered detection and tracking approach. Results showed that the considered approach can track objects faster than the most common computer vision methods based on neural networks. Furthermore, the conflict was successfully avoided with the proposed technique. Design parameters were allowed to adjust speed and maneuvers accordingly to the expected environment or the required level of safety. The main conclusion was that this kind of neural network could be successfully applied to Sense and Avoid systems.Vidal Navarro, D. (2018). Sense and avoid using hybrid convolutional and recurrent neural networks. Universitat Politècnica de València. http://hdl.handle.net/10251/142606TFG

Autonomous, Collaborative, Unmanned Aerial Vehicles for Search and Rescue

Search and Rescue is a vitally important subject, and one which can be improved through the use of modern technology. This work presents a number of advances aimed towards the creation of a swarm of autonomous, collaborative, unmanned aerial vehicles for land-based search and rescue. The main advances are the development of a diffusion based search strategy for route planning, research into GPS (including the Durham Tracker Project and statistical research into altitude errors), and the creation of a relative positioning system (including discussion of the errors caused by fast-moving units). Overviews are also given of the current state of research into both UAVs and Search and Rescue

Autonomous Vehicles

This edited volume, Autonomous Vehicles, is a collection of reviewed and relevant research chapters, offering a comprehensive overview of recent developments in the field of vehicle autonomy. The book comprises nine chapters authored by various researchers and edited by an expert active in the field of study. All chapters are complete in itself but united under a common research study topic. This publication aims to provide a thorough overview of the latest research efforts by international authors, open new possible research paths for further novel developments, and to inspire the younger generations into pursuing relevant academic studies and professional careers within the autonomous vehicle field

Debris/Ice/TPS Assessment and Photographic Analysis for Shuttle Mission STS-38

A debris/ice/TPS assessment and photographic analysis was conducted for the Space Shuttle Mission STS-38. Debris inspection of the flight elements and launch pad were performed before and after launch. Ice/frost conditions on the external tank were assessed by the use of computer programs, nomographs, and infrared scanner data during cryogenic loading of the vehicle followed by on-pad visual inspection. High speed photography was analyzed after launch to identify ice/debris sources and evaluate potential vehicle damage and/or in-flight anomalies. The debris/ice/TPS conditions and photographic analysis of Mission STS-38, and their overall effect on the Space Shuttle Program are documented

A Comparative Evaluation of the Detection and Tracking Capability Between Novel Event-Based and Conventional Frame-Based Sensors

Traditional frame-based technology continues to suffer from motion blur, low dynamic range, speed limitations and high data storage requirements. Event-based sensors offer a potential solution to these challenges. This research centers around a comparative assessment of frame and event-based object detection and tracking. A basic frame-based algorithm is used to compare against two different event-based algorithms. First event-based pseudo-frames were parsed through standard frame-based algorithms and secondly, target tracks were constructed directly from filtered events. The findings show there is significant value in pursuing the technology further

Application of advanced technology to space automation

Automated operations in space provide the key to optimized mission design and data acquisition at minimum cost for the future. The results of this study strongly accentuate this statement and should provide further incentive for immediate development of specific automtion technology as defined herein. Essential automation technology requirements were identified for future programs. The study was undertaken to address the future role of automation in the space program, the potential benefits to be derived, and the technology efforts that should be directed toward obtaining these benefits