A Robot-Sensor Network Security Architecture for Monitoring Applications

This paper presents SNSR (Sensor Network Security using Robots), a novel, open, and flexible architecture that improves security in static sensor networks by benefiting from robot-sensor network cooperation. In SNSR, the robot performs sensor node authentication and radio-based localization (enabling centralized topology computation and route establishment) and directly interacts with nodes to send them configurations or receive status and anomaly reports without intermediaries. SNSR operation is divided into stages set in a feedback iterative structure, which enables repeating the execution of stages to adapt to changes, respond to attacks, or detect and correct errors. By exploiting the robot capabilities, SNSR provides high security levels and adaptability without requiring complex mechanisms. This paper presents SNSR, analyzes its security against common attacks, and experimentally validates its performance

New Waves of IoT Technologies Research – Transcending Intelligence and Senses at the Edge to Create Multi Experience Environments

The next wave of Internet of Things (IoT) and Industrial Internet of Things (IIoT) brings new technological developments that incorporate radical advances in Artificial Intelligence (AI), edge computing processing, new sensing capabilities, more security protection and autonomous functions accelerating progress towards the ability for IoT systems to self-develop, self-maintain and self-optimise. The emergence of hyper autonomous IoT applications with enhanced sensing, distributed intelligence, edge processing and connectivity, combined with human augmentation, has the potential to power the transformation and optimisation of industrial sectors and to change the innovation landscape. This chapter is reviewing the most recent advances in the next wave of the IoT by looking not only at the technology enabling the IoT but also at the platforms and smart data aspects that will bring intelligence, sustainability, dependability, autonomy, and will support human-centric solutions.acceptedVersio

Engineering Self-Adaptive Collective Processes for Cyber-Physical Ecosystems

The pervasiveness of computing and networking is creating significant opportunities for building valuable socio-technical systems. However, the scale, density, heterogeneity, interdependence, and QoS constraints of many target systems pose severe operational and engineering challenges. Beyond individual smart devices, cyber-physical collectives can provide services or solve complex problems by leveraging a “system effect” while coordinating and adapting to context or environment change. Understanding and building systems exhibiting collective intelligence and autonomic capabilities represent a prominent research goal, partly covered, e.g., by the field of collective adaptive systems. Therefore, drawing inspiration from and building on the long-time research activity on coordination, multi-agent systems, autonomic/self-* systems, spatial computing, and especially on the recent aggregate computing paradigm, this thesis investigates concepts, methods, and tools for the engineering of possibly large-scale, heterogeneous ensembles of situated components that should be able to operate, adapt and self-organise in a decentralised fashion. The primary contribution of this thesis consists of four main parts. First, we define and implement an aggregate programming language (ScaFi), internal to the mainstream Scala programming language, for describing collective adaptive behaviour, based on field calculi. Second, we conceive of a “dynamic collective computation” abstraction, also called aggregate process, formalised by an extension to the field calculus, and implemented in ScaFi. Third, we characterise and provide a proof-of-concept implementation of a middleware for aggregate computing that enables the development of aggregate systems according to multiple architectural styles. Fourth, we apply and evaluate aggregate computing techniques to edge computing scenarios, and characterise a design pattern, called Self-organising Coordination Regions (SCR), that supports adjustable, decentralised decision-making and activity in dynamic environments.Con lo sviluppo di informatica e intelligenza artificiale, la diffusione pervasiva di device computazionali e la crescente interconnessione tra elementi fisici e digitali, emergono innumerevoli opportunità per la costruzione di sistemi socio-tecnici di nuova generazione. Tuttavia, l'ingegneria di tali sistemi presenta notevoli sfide, data la loro complessità—si pensi ai livelli, scale, eterogeneità, e interdipendenze coinvolti. Oltre a dispositivi smart individuali, collettivi cyber-fisici possono fornire servizi o risolvere problemi complessi con un “effetto sistema” che emerge dalla coordinazione e l'adattamento di componenti fra loro, l'ambiente e il contesto. Comprendere e costruire sistemi in grado di esibire intelligenza collettiva e capacità autonomiche è un importante problema di ricerca studiato, ad esempio, nel campo dei sistemi collettivi adattativi. Perciò, traendo ispirazione e partendo dall'attività di ricerca su coordinazione, sistemi multiagente e self-*, modelli di computazione spazio-temporali e, specialmente, sul recente paradigma di programmazione aggregata, questa tesi tratta concetti, metodi, e strumenti per l'ingegneria di ensemble di elementi situati eterogenei che devono essere in grado di lavorare, adattarsi, e auto-organizzarsi in modo decentralizzato. Il contributo di questa tesi consiste in quattro parti principali. In primo luogo, viene definito e implementato un linguaggio di programmazione aggregata (ScaFi), interno al linguaggio Scala, per descrivere comportamenti collettivi e adattativi secondo l'approccio dei campi computazionali. In secondo luogo, si propone e caratterizza l'astrazione di processo aggregato per rappresentare computazioni collettive dinamiche concorrenti, formalizzata come estensione al field calculus e implementata in ScaFi. Inoltre, si analizza e implementa un prototipo di middleware per sistemi aggregati, in grado di supportare più stili architetturali. Infine, si applicano e valutano tecniche di programmazione aggregata in scenari di edge computing, e si propone un pattern, Self-Organising Coordination Regions, per supportare, in modo decentralizzato, attività decisionali e di regolazione in ambienti dinamici

Self-Protecting Access Control: On Mitigating Privacy Violations with Fault Tolerance

Self-protecting access control mechanisms can be described as an approach to enforcing security in a manner that automatically protects against violations of access control rules. In this chapter, we present a comparative analysis of standard Cryptographic Access Control (CAC) schemes in relation to privacy enforcement on the Web. We postulate that to mitigate privacy violations, self-protecting CAC mechanisms need to be supported by fault-tolerance. As an example of how one might to do this, we present two solutions that are inspired by the autonomic computing paradigm1. Our solutions are centered on how CAC schemes can be extended to protect against privacy violations that might arise from key updates and collusion attacks

Efficient Passive Clustering and Gateways selection MANETs

Passive clustering does not employ control packets to collect topological information in ad hoc networks. In our proposal, we avoid making frequent changes in cluster architecture due to repeated election and re-election of cluster heads and gateways. Our primary objective has been to make Passive Clustering more practical by employing optimal number of gateways and reduce the number of rebroadcast packets

Recent Advances in Multi Robot Systems

To design a team of robots which is able to perform given tasks is a great concern of many members of robotics community. There are many problems left to be solved in order to have the fully functional robot team. Robotics community is trying hard to solve such problems (navigation, task allocation, communication, adaptation, control, ...). This book represents the contributions of the top researchers in this field and will serve as a valuable tool for professionals in this interdisciplinary field. It is focused on the challenging issues of team architectures, vehicle learning and adaptation, heterogeneous group control and cooperation, task selection, dynamic autonomy, mixed initiative, and human and robot team interaction. The book consists of 16 chapters introducing both basic research and advanced developments. Topics covered include kinematics, dynamic analysis, accuracy, optimization design, modelling, simulation and control of multi robot systems

Comunicações sem fios confiáveis para aplicações veiculares

Doutoramento em Engenharia ElectrotécnicaIn the last decades the number of vehicles travelling in European road has raised significantly. Unfortunately, this brought a very high number of road accidents and consequently various injuries and fatalities. Even after the introduction of passive safety systems, such as seat belts, airbags, and some active safety systems, such as electronic brake system (ABS) and electronic stabilization (ESP), the number of accidents is still too high. Approximately eight per cent of the fatal accidents occur in motorways, in the Portuguese case, the number of fatalities has remained constant in the first decade of the 21st century. The evolution of wireless communications, along with the north-American and European policies that reserve spectrum near the 5,9GHz band for safety applications in the vehicular environment, has lead to the development of several standards. Many of these applications are based on the possibility of using a wireless communication system to warn drivers and passengers of events occurring on the road that can put at risk their own safety. Some examples of safety applications are the hard-brake warning, the wrong-way warning and the accident warning. This work aims to contribute in defining a communication protocol that guarantees the timely dissemination of safety critical events, occurring in scenarios with a high number of vehicles or in the neighbourhood of so called motorway “blackspots”, to all vehicles in the zone of interest. To ensure information integrity and user trust, the proposed system is based on the motorway infrastructure, which will validate all events reported by the vehicles with the usage of several means, such as video surveillance or other sensors. The usage of motorway infrastructure that has full motorway coverage using fixed stations also known as road side units, allows to have a global vision of the interest zone, avoiding the problems associated to networks that depend solely on vehicle to vehicle communication, generally total ad-hoc networks. By using the infrastructure, it is possible to control medium access, avoiding possible badly intended intrusions and also avoiding the phenomenon known as alarm showers or broadcast storm that occur when all vehicles want to simultaneously access the medium to warn others of a safety event. The thesis presented in this document is that it is possible to guarantee in time information about safety events, using an architecture where the road side units are coordinated among themselves, and communicate with on board units (in vehicles) that dynamically register and deregister from the system. An exhaustive and systematic state of the art of safety applications and related research projects is done, followed by a study on the available wireless communications standards that are able to support them. The set of standards IEEE802.11p and ETSI-G5 was created for this purpose and is found to be the more adequate, but care is taken to define a scenario where WAVE enabled and non-enabled vehicles can coexist. The WAVE medium access control protocol suffers from collision problems that do not guarantee a bounded delay, therefore a new protocol (V-FTT) is proposed, based on the adaptation of the Flexible Time Triggered protocol to the vehicular field. A theoretical analysis of the V-FTT applied to WAVE and ETSI-G5 is done, including quantifying a real scenario based on the A5 motorway from Lisbon to Cascais, one of the busiest Portuguese motorways. We conclude the V-FTT protocol is feasible and guarantees a bounded delay.Nas últimas décadas tem-se assistido a um aumento do número de veículos a circular nas vias rodoviárias europeias, trazendo consigo um elevado número de acidentes e como consequência muitos feridos e vítimas mortais. Apesar da introdução de sistemas de segurança passivos, tais como cintos de segurança, airbags e de alguns sistemas de segurança activos, tais como o sistema electrónico de travagem (ABS) e o sistema electrónico de estabilidade (ESP), o número de acidentes continua a ser demasiado elevado. Aproximadamente oito por cento dos acidentes fatais na Europa ocorrem em auto-estradas, no caso Português, o número de vítimas mortais tem-se mantido constante ao longo da primeira década do século XXI. A evolução das comunicações sem fios, acompanhada de políticas europeias e norte-americanas no sentido de reservar frequências próximas dos 5,9GHz para aplicações de segurança no ambiente veicular, levou à especificação de várias normas. A maior parte destas aplicações baseiam-se na possibilidade de usar um sistema confiável de comunicação sem fios para alertar os condutores e passageiros de veículos para eventos ocorridos nas estradas que possam colocar em risco a sua segurança. Exemplos de aplicações de segurança crítica são o aviso de travagem brusca, o aviso de veículo em contra mão e o aviso de acidente na estrada. Este trabalho contribui para a definição de protocolos de comunicação capazes de garantir que a informação sobre eventos relacionados com situações de segurança crítica, que ocorram em cenários com um elevado número de veículos em zonas urbanas ou na vizinhança dos chamados “pontos negros” das auto-estradas, é disseminada com pontualidade por todos os veículos localizados na zona de interesse Por uma questão da integridade das comunicações e confiança dos condutores, o sistema proposto baseia-se na infra-estrutura do concessionário da auto-estrada, que validará os eventos reportados pelos veículos usando vários meios à sua disposição, como por exemplo sistemas de videovigilância e outros sensores. O uso de uma infra-estrutura de comunicações, que dispõe de cobertura integral a partir de estações fixas, permite uma visão global da zona coberta, evitando os problemas associados a redes baseadas apenas na comunicação entre veículos, que são em geral totalmente ad-hoc. O uso da infra-estrutura permite, entre outras vantagens, controlar o acesso ao meio, evitando simultaneamente intrusões de estranhos ao sistema e o fenómeno conhecido como “chuva de alarmes” desencadeado quando todos os veículos querem aceder simultaneamente ao meio para avisar os restantes da existência dum evento de segurança crítica. A tese apresentada neste documento defende que é possível garantir informação atempada sobre eventos que põem em risco a segurança dos veículos a partir de uma arquitectura de interligação entre as estações de comunicações fixas, coordenadas entre si, e unidades móveis (veículos) que se registam e se desligam dinamicamente do sistema. Nesta tese faz-se um levantamento exaustivo e sistemático das aplicações de segurança abordando projectos de investigação relacionados, estudam-se as tecnologias de comunicação sem fios disponíveis e a sua possibilidade de suportar aplicações de segurança rodoviária. Desta análise, conclui-se que a norma norte americana WAVE/IEEE802.11p e a europeia ETSI-G5, criadas especificamente para o efeito são as que mais se adequam à finalidade desejada. Considera-se que o cenário de utilização é evolutivo, podendo coexistirem veículos que não dispõem de sistemas de comunicação com outros que suportam a norma WAVE. Dado que o protocolo de acesso ao meio proposto pela norma WAVE não garante um acesso determinístico ao meio partilhado, propõe-se um novo protocolo, o Vehicular Flexible Time-Triggered protocol (VFTT). Faz-se a análise teórica da viabilidade do protocolo proposto para a norma WAVE e respectiva norma europeia (ETSI-G5). Quantifica-se o protocolo VFTT para um cenário real: a auto-estrada A5 Lisboa-Cascais, uma das autoestradas portuguesas mais movimentadas. Conclui-se que o protocolo é viável e garante um atraso restringido temporalmente

Proceedings of the 2004 ONR Decision-Support Workshop Series: Interoperability

In August of 1998 the Collaborative Agent Design Research Center (CADRC) of the California Polytechnic State University in San Luis Obispo (Cal Poly), approached Dr. Phillip Abraham of the Office of Naval Research (ONR) with the proposal for an annual workshop focusing on emerging concepts in decision-support systems for military applications. The proposal was considered timely by the ONR Logistics Program Office for at least two reasons. First, rapid advances in information systems technology over the past decade had produced distributed collaborative computer-assistance capabilities with profound potential for providing meaningful support to military decision makers. Indeed, some systems based on these new capabilities such as the Integrated Marine Multi-Agent Command and Control System (IMMACCS) and the Integrated Computerized Deployment System (ICODES) had already reached the field-testing and final product stages, respectively. Second, over the past two decades the US Navy and Marine Corps had been increasingly challenged by missions demanding the rapid deployment of forces into hostile or devastate dterritories with minimum or non-existent indigenous support capabilities. Under these conditions Marine Corps forces had to rely mostly, if not entirely, on sea-based support and sustainment operations. Particularly today, operational strategies such as Operational Maneuver From The Sea (OMFTS) and Sea To Objective Maneuver (STOM) are very much in need of intelligent, near real-time and adaptive decision-support tools to assist military commanders and their staff under conditions of rapid change and overwhelming data loads. In the light of these developments the Logistics Program Office of ONR considered it timely to provide an annual forum for the interchange of ideas, needs and concepts that would address the decision-support requirements and opportunities in combined Navy and Marine Corps sea-based warfare and humanitarian relief operations. The first ONR Workshop was held April 20-22, 1999 at the Embassy Suites Hotel in San Luis Obispo, California. It focused on advances in technology with particular emphasis on an emerging family of powerful computer-based tools, and concluded that the most able members of this family of tools appear to be computer-based agents that are capable of communicating within a virtual environment of the real world. From 2001 onward the venue of the Workshop moved from the West Coast to Washington, and in 2003 the sponsorship was taken over by ONR’s Littoral Combat/Power Projection (FNC) Program Office (Program Manager: Mr. Barry Blumenthal). Themes and keynote speakers of past Workshops have included: 1999: ‘Collaborative Decision Making Tools’ Vadm Jerry Tuttle (USN Ret.); LtGen Paul Van Riper (USMC Ret.);Radm Leland Kollmorgen (USN Ret.); and, Dr. Gary Klein (KleinAssociates) 2000: ‘The Human-Computer Partnership in Decision-Support’ Dr. Ronald DeMarco (Associate Technical Director, ONR); Radm CharlesMunns; Col Robert Schmidle; and, Col Ray Cole (USMC Ret.) 2001: ‘Continuing the Revolution in Military Affairs’ Mr. Andrew Marshall (Director, Office of Net Assessment, OSD); and,Radm Jay M. Cohen (Chief of Naval Research, ONR) 2002: ‘Transformation ... ’ Vadm Jerry Tuttle (USN Ret.); and, Steve Cooper (CIO, Office ofHomeland Security) 2003: ‘Developing the New Infostructure’ Richard P. Lee (Assistant Deputy Under Secretary, OSD); and, MichaelO’Neil (Boeing) 2004: ‘Interoperability’ MajGen Bradley M. Lott (USMC), Deputy Commanding General, Marine Corps Combat Development Command; Donald Diggs, Director, C2 Policy, OASD (NII

Mobile Networks

The growth in the use of mobile networks has come mainly with the third generation systems and voice traffic. With the current third generation and the arrival of the 4G, the number of mobile users in the world will exceed the number of landlines users. Audio and video streaming have had a significant increase, parallel to the requirements of bandwidth and quality of service demanded by those applications. Mobile networks require that the applications and protocols that have worked successfully in fixed networks can be used with the same level of quality in mobile scenarios. Until the third generation of mobile networks, the need to ensure reliable handovers was still an important issue. On the eve of a new generation of access networks (4G) and increased connectivity between networks of different characteristics commonly called hybrid (satellite, ad-hoc, sensors, wired, WIMAX, LAN, etc.), it is necessary to transfer mechanisms of mobility to future generations of networks. In order to achieve this, it is essential to carry out a comprehensive evaluation of the performance of current protocols and the diverse topologies to suit the new mobility conditions