A novel vision-based multi-functional sensor for normality and position measurements in precise robotic manufacturing

Cobots play an essential role in the fourth industrial revolution and the automation of complex manufacturing processes. However, cobots still face challenges in achieving high precision, which obstructs their usage in precise applications such as the aerospace industry. Nonetheless, advances in perception systems unlock new cobot manufacturing capabilities. This paper presents a novel multi-functional sensor that combines visual and tactile feedback using a single optical sensor, featuring a moving gate mechanism. This work also marks the first integration of Vision-Based Tactile Sensing (VBTS) into a robotic machining end-effector. The sensor provides vision-based tactile perception capabilities for precise normality control and exteroceptive perception for robot localization and positioning. Its performance is experimentally demonstrated in a precise robotic deburring application, where the sensor achieves the high-precision requirements of the aerospace industry with a mean normality error of 0.13° and a mean positioning error of 0.2 mm. These results open a new paradigm for using vision-based sensing for precise robotic manufacturing, which surpasses conventional approaches in terms of precision, weight, size, and cost-effectiveness

Automation and Robotics: Latest Achievements, Challenges and Prospects

This SI presents the latest achievements, challenges and prospects for drives, actuators, sensors, controls and robot navigation with reverse validation and applications in the field of industrial automation and robotics. Automation, supported by robotics, can effectively speed up and improve production. The industrialization of complex mechatronic components, especially robots, requires a large number of special processes already in the pre-production stage provided by modelling and simulation. This area of research from the very beginning includes drives, process technology, actuators, sensors, control systems and all connections in mechatronic systems. Automation and robotics form broad-spectrum areas of research, which are tightly interconnected. To reduce costs in the pre-production stage and to reduce production preparation time, it is necessary to solve complex tasks in the form of simulation with the use of standard software products and new technologies that allow, for example, machine vision and other imaging tools to examine new physical contexts, dependencies and connections

Three-dimensional histological specimen preparation for accurate imaging and spatial reconstruction of the middle and inner ear

PURPOSE:    This paper presents a highly accurate cross-sectional preparation technique. The research aim was to develop an adequate imaging modality for both soft and bony tissue structures featuring high contrast and high resolution. Therefore, the advancement of an already existing microgrinding procedure was pursued. The central objectives were to preserve spatial relations and to ensure the accurate three-dimensional reconstruction of histological sections. METHODS:    Twelve human temporal bone specimens including middle and inner ear structures were utilized. They were embedded in epoxy resin, then dissected by serial grinding and finally digitalized. The actual abrasion of each grinding slice was measured using a tactile length gauge with an accuracy of one micrometre. The cross-sectional images were aligned with the aid of artificial markers and by applying a feature-based, custom-made auto-registration algorithm. To determine the accuracy of the overall reconstruction procedure, a well-known reference object was used for comparison. To ensure the compatibility of the histological data with conventional clinical image data, the image stacks were finally converted into the DICOM standard. RESULTS:    The image fusion of data from temporal bone specimens’ and from non-destructive flat-panel-based volume computed tomography confirmed the spatial accuracy achieved by the procedure, as did the evaluation using the reference object. CONCLUSION:    This systematic and easy-to-follow preparation technique enables the three-dimensional (3D) histological reconstruction of complex soft and bony tissue structures. It facilitates the creation of detailed and spatially correct 3D anatomical models. Such models are of great benefit for image-based segmentation and planning in the field of computer-assisted surgery as well as in finite element analysis. In the context of human inner ear surgery, three-dimensional histology will improve the experimental evaluation and determination of intra-cochlear trauma after the insertion of an electrode array of a cochlear implant system

A framework for flexible integration in robotics and its applications for calibration and error compensation

Robotics has been considered as a viable automation solution for the aerospace industry to address manufacturing cost. Many of the existing robot systems augmented with guidance from a large volume metrology system have proved to meet the high dimensional accuracy requirements in aero-structure assembly. However, they have been mainly deployed as costly and dedicated systems, which might not be ideal for aerospace manufacturing having low production rate and long cycle time. The work described in this thesis is to provide technical solutions to improve the flexibility and cost-efficiency of such metrology-integrated robot systems. To address the flexibility, a software framework that supports reconfigurable system integration is developed. The framework provides a design methodology to compose distributed software components which can be integrated dynamically at runtime. This provides the potential for the automation devices (robots, metrology, actuators etc.) controlled by these software components to be assembled on demand for various assembly applications. To reduce the cost of deployment, this thesis proposes a two-stage error compensation scheme for industrial robots that requires only intermittent metrology input, thus allowing for one expensive metrology system to be used by a number of robots. Robot calibration is employed in the first stage to reduce the majority of robot inaccuracy then the metrology will correct the residual errors. In this work, a new calibration model for serial robots having a parallelogram linkage is developed that takes into account both geometric errors and joint deflections induced by link masses and weight of the end-effectors. Experiments are conducted to evaluate the two pieces of work presented above. The proposed framework is adopted to create a distributed control system that implements calibration and error compensation for a large industrial robot having a parallelogram linkage. The control system is formed by hot-plugging the control applications of the robot and metrology used together. Experimental results show that the developed error model was able to improve the 3 positional accuracy of the loaded robot from several millimetres to less than one millimetre and reduce half of the time previously required to correct the errors by using only the metrology. The experiments also demonstrate the capability of sharing one metrology system to more than one robot

Smart Technologies for Precision Assembly

This open access book constitutes the refereed post-conference proceedings of the 9th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2020, held virtually in December 2020. The 16 revised full papers and 10 revised short papers presented together with 1 keynote paper were carefully reviewed and selected from numerous submissions. The papers address topics such as assembly design and planning; assembly operations; assembly cells and systems; human centred assembly; and assistance methods in assembly

Advances on Mechanics, Design Engineering and Manufacturing III

This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 2–4, 2020. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is organized into four main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations

Standardizing Innovation Management: An Opportunity for SMEs in the Aerospace Industry

In a globalized marketplace, the competition in the aerospace industry has increased significantly. Producers can choose between many suppliers. These suppliers have to comply with more requirements and technical specifications, as well as take on greater responsibilities that originally fell on producers. In this context, business opportunities for small and medium-sized enterprises (SMEs) are limited, but still suppliers must try to leverage the maximum strategic advantage of the few that present. Adopting research, development and innovation (R+D+i) practices has proven to bring great benefits to companies and allows them to gain significant competitive advantages. However, the process of designing, implementing and testing R+D+i-related processes is not straightforward, nor it has been addressed in the recent research on SMEs. In this paper, a case study of a Spanish innovative small company providing industrial metrology and quality services is analyzed. Thanks to an internal decision-making process, an R+D+i management system based on the UNE 166.002:2014 standard is eventually adopted. A pilot project is closely followed up to test the robustness of the system implementation. The R+D+i management system has allowed the company to streamline its innovation activities, establish objectives to better allocate essential resources, organize high performing innovation units within the organization structure, increase the clients’ confidence, improve the company’s competitiveness, carry out technological surveillance, and get more patented technology, among many others. Adoption steps taken by this SME are generalizable to other SMEs from other industries and show how an R+D+i management system can be chosen, designed, implemented and tested in the context of Industry 4.0 (I4.0)

Advances on Mechanics, Design Engineering and Manufacturing III

This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 2–4, 2020. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is organized into four main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations