Multimodal feedback for mid-air gestures when driving

Mid-air gestures in cars are being used by an increasing number of drivers on the road. Us-ability concerns mean good feedback is important, but a balance needs to be found between supporting interaction and reducing distraction in an already demanding environment. Visual feedback is most commonly used, but takes visual attention away from driving. This thesis investigates novel non-visual alternatives to support the driver during mid-air gesture interaction: Cutaneous Push, Peripheral Lights, and Ultrasound feedback. These modalities lack the expressive capabilities of high resolution screens, but are intended to allow drivers to focus on the driving task. A new form of haptic feedback — Cutaneous Push — was defined. Six solenoids were embedded along the rim of the steering wheel, creating three bumps under each palm. Studies 1, 2, and 3 investigated the efficacy of novel static and dynamic Cutaneous Push patterns, and their impact on driving performance. In simulated driving studies, the cutaneous patterns were tested. The results showed pattern identification rates of up to 81.3% for static patterns and 73.5% for dynamic patterns and 100% recognition of directional cues. Cutaneous Push notifications did not impact driving behaviour nor workload and showed very high user acceptance. Cutaneous Push patterns have the potential to make driving safer by providing non-visual and instantaneous messages, for example to indicate an approaching cyclist or obstacle. Studies 4 & 5 looked at novel uni- and bimodal feedback combinations of Visual, Auditory, Cutaneous Push, and Peripheral Lights for mid-air gestures and found that non-visual feedback modalities, especially when combined bimodally, offered just as much support for interaction without negatively affecting driving performance, visual attention and cognitive demand. These results provide compelling support for using non-visual feedback from in-car systems, supporting input whilst letting drivers focus on driving.Studies 6 & 7 investigated the above bimodal combinations as well as uni- and bimodal Ultrasound feedback during the Lane Change Task to assess the impact of gesturing and feedback modality on car control during more challenging driving. The results of study Seven suggests that Visual and Ultrasound feedback are not appropriate for in-car usage,unless combined multimodally. If Ultrasound is used unimodally it is more useful in a binary scenario.Findings from Studies 5, 6, and 7 suggest that multimodal feedback significantly reduces eyes-off-the-road time compared to Visual feedback without compromising driving performance or perceived user workload, thus it can potentially reduce crash risks. Novel design recommendations for providing feedback during mid-air gesture interaction in cars are provided, informed by the experiment findings

A Framework For Abstracting, Designing And Building Tangible Gesture Interactive Systems

This thesis discusses tangible gesture interaction, a novel paradigm for interacting with computer that blends concepts from the more popular fields of tangible interaction and gesture interaction. Taking advantage of the human innate abilities to manipulate physical objects and to communicate through gestures, tangible gesture interaction is particularly interesting for interacting in smart environments, bringing the interaction with computer beyond the screen, back to the real world. Since tangible gesture interaction is a relatively new field of research, this thesis presents a conceptual framework that aims at supporting future work in this field. The Tangible Gesture Interaction Framework provides support on three levels. First, it helps reflecting from a theoretical point of view on the different types of tangible gestures that can be designed, physically, through a taxonomy based on three components (move, hold and touch) and additional attributes, and semantically, through a taxonomy of the semantic constructs that can be used to associate meaning to tangible gestures. Second, it helps conceiving new tangible gesture interactive systems and designing new interactions based on gestures with objects, through dedicated guidelines for tangible gesture definition and common practices for different application domains. Third, it helps building new tangible gesture interactive systems supporting the choice between four different technological approaches (embedded and embodied, wearable, environmental or hybrid) and providing general guidance for the different approaches. As an application of this framework, this thesis presents also seven tangible gesture interactive systems for three different application domains, i.e., interacting with the In-Vehicle Infotainment System (IVIS) of the car, the emotional and interpersonal communication, and the interaction in a smart home. For the first application domain, four different systems that use gestures on the steering wheel as interaction means with the IVIS have been designed, developed and evaluated. For the second application domain, an anthropomorphic lamp able to recognize gestures that humans typically perform for interpersonal communication has been conceived and developed. A second system, based on smart t-shirts, recognizes when two people hug and reward the gesture with an exchange of digital information. Finally, a smart watch for recognizing gestures performed with objects held in the hand in the context of the smart home has been investigated. The analysis of existing systems found in literature and of the system developed during this thesis shows that the framework has a good descriptive and evaluative power. The applications developed during this thesis show that the proposed framework has also a good generative power.Questa tesi discute l’interazione gestuale tangibile, un nuovo paradigma per interagire con il computer che unisce i principi dei più comuni campi di studio dell’interazione tangibile e dell’interazione gestuale. Sfruttando le abilità innate dell’uomo di manipolare oggetti fisici e di comunicare con i gesti, l’interazione gestuale tangibile si rivela particolarmente interessante per interagire negli ambienti intelligenti, riportando l’attenzione sul nostro mondo reale, al di là dello schermo dei computer o degli smartphone. Poiché l’interazione gestuale tangibile è un campo di studio relativamente recente, questa tesi presenta un framework (quadro teorico) che ha lo scopo di assistere lavori futuri in questo campo. Il Framework per l’Interazione Gestuale Tangibile fornisce supporto su tre livelli. Per prima cosa, aiuta a riflettere da un punto di vista teorico sui diversi tipi di gesti tangibili che possono essere eseguiti fisicamente, grazie a una tassonomia basata su tre componenti (muovere, tenere, toccare) e attributi addizionali, e che possono essere concepiti semanticamente, grazie a una tassonomia di tutti i costrutti semantici che permettono di associare dei significati ai gesti tangibili. In secondo luogo, il framework proposto aiuta a concepire nuovi sistemi interattivi basati su gesti tangibili e a ideare nuove interazioni basate su gesti con gli oggetti, attraverso linee guida per la definizione di gesti tangibili e una selezione delle migliore pratiche per i differenti campi di applicazione. Infine, il framework aiuta a implementare nuovi sistemi interattivi basati su gesti tangibili, permettendo di scegliere tra quattro differenti approcci tecnologici (incarnato e integrato negli oggetti, indossabile, distribuito nell’ambiente, o ibrido) e fornendo una guida generale per la scelta tra questi differenti approcci. Come applicazione di questo framework, questa tesi presenta anche sette sistemi interattivi basati su gesti tangibili, realizzati per tre differenti campi di applicazione: l’interazione con i sistemi di infotainment degli autoveicoli, la comunicazione interpersonale delle emozioni, e l’interazione nella casa intelligente. Per il primo campo di applicazione, sono stati progettati, sviluppati e testati quattro differenti sistemi che usano gesti tangibili effettuati sul volante come modalità di interazione con il sistema di infotainment. Per il secondo campo di applicazione, è stata concepita e sviluppata una lampada antropomorfica in grado di riconoscere i gesti tipici dell’interazione interpersonale. Per lo stesso campo di applicazione, un secondo sistema, basato su una maglietta intelligente, riconosce quando due persone si abbracciano e ricompensa questo gesto con uno scambio di informazioni digitali. Infine, per l’interazione nella casa intelligente, è stata investigata la realizzazione di uno smart watch per il riconoscimento di gesti eseguiti con oggetti tenuti nella mano. L’analisi dei sistemi interattivi esistenti basati su gesti tangibili permette di dimostrare che il framework ha un buon potere descrittivo e valutativo. Le applicazioni sviluppate durante la tesi mostrano che il framework proposto ha anche un valido potere generativo

Accessible Autonomy: Exploring Inclusive Autonomous Vehicle Design and Interaction for People who are Blind and Visually Impaired

Autonomous vehicles are poised to revolutionize independent travel for millions of people experiencing transportation-limiting visual impairments worldwide. However, the current trajectory of automotive technology is rife with roadblocks to accessible interaction and inclusion for this demographic. Inaccessible (visually dependent) interfaces and lack of information access throughout the trip are surmountable, yet nevertheless critical barriers to this potentially lifechanging technology. To address these challenges, the programmatic dissertation research presented here includes ten studies, three published papers, and three submitted papers in high impact outlets that together address accessibility across the complete trip of transportation. The first paper began with a thorough review of the fully autonomous vehicle (FAV) and blind and visually impaired (BVI) literature, as well as the underlying policy landscape. Results guided prejourney ridesharing needs among BVI users, which were addressed in paper two via a survey with (n=90) transit service drivers, interviews with (n=12) BVI users, and prototype design evaluations with (n=6) users, all contributing to the Autonomous Vehicle Assistant: an award-winning and accessible ridesharing app. A subsequent study with (n=12) users, presented in paper three, focused on prejourney mapping to provide critical information access in future FAVs. Accessible in-vehicle interactions were explored in the fourth paper through a survey with (n=187) BVI users. Results prioritized nonvisual information about the trip and indicated the importance of situational awareness. This effort informed the design and evaluation of an ultrasonic haptic HMI intended to promote situational awareness with (n=14) participants (paper five), leading to a novel gestural-audio interface with (n=23) users (paper six). Strong support from users across these studies suggested positive outcomes in pursuit of actionable situational awareness and control. Cumulative results from this dissertation research program represent, to our knowledge, the single most comprehensive approach to FAV BVI accessibility to date. By considering both pre-journey and in-vehicle accessibility, results pave the way for autonomous driving experiences that enable meaningful interaction for BVI users across the complete trip of transportation. This new mode of accessible travel is predicted to transform independent travel for millions of people with visual impairment, leading to increased independence, mobility, and quality of life

Enhancing interaction in mixed reality

With continuous technological innovation, we observe mixed reality emerging from research labs into the mainstream. The arrival of capable mixed reality devices transforms how we are entertained, consume information, and interact with computing systems, with the most recent being able to present synthesized stimuli to any of the human senses and substantially blur the boundaries between the real and virtual worlds. In order to build expressive and practical mixed reality experiences, designers, developers, and stakeholders need to understand and meet its upcoming challenges. This research contributes a novel taxonomy for categorizing mixed reality experiences and guidelines for designing mixed reality experiences. We present the results of seven studies examining the challenges and opportunities of mixed reality experiences, the impact of modalities and interaction techniques on the user experience, and how to enhance the experiences. We begin with a study determining user attitudes towards mixed reality in domestic and educational environments, followed by six research probes that each investigate an aspect of reality or virtuality. In the first, a levitating steerable projector enables us to investigate how the real world can be enhanced without instrumenting the user. We show that the presentation of in-situ instructions for navigational tasks leads to a significantly higher ability to observe and recall real-world landmarks. With the second probe, we enhance the perception of reality by superimposing information usually not visible to the human eye. In amplifying the human vision, we enable users to perceive thermal radiation visually. Further, we examine the effect of substituting physical components with non-functional tangible proxies or entirely virtual representations. With the third research probe, we explore how to enhance virtuality to enable a user to input text on a physical keyboard while being immersed in the virtual world. Our prototype tracked the user’s hands and keyboard to enable generic text input. Our analysis of text entry performance showed the importance and effect of different hand representations. We then investigate how to touch virtuality by simulating generic haptic feedback for virtual reality and show how tactile feedback through quadcopters can significantly increase the sense of presence. Our final research probe investigates the usability and input space of smartphones within mixed reality environments, pairing the user’s smartphone as an input device with a secondary physical screen. Based on our learnings from these individual research probes, we developed a novel taxonomy for categorizing mixed reality experiences and guidelines for designing mixed reality experiences. The taxonomy is based on the human sensory system and human capabilities of articulation. We showcased its versatility and set our research probes into perspective by organizing them inside the taxonomic space. The design guidelines are divided into user-centered and technology-centered. It is our hope that these will contribute to the bright future of mixed reality systems while emphasizing the new underlining interaction paradigm.Mixed Reality (vermischte Realitäten) gehen aufgrund kontinuierlicher technologischer Innovationen langsam von der reinen Forschung in den Massenmarkt über. Mit der Einführung von leistungsfähigen Mixed-Reality-Geräten verändert sich die Art und Weise, wie wir Unterhaltungsmedien und Informationen konsumieren und wie wir mit Computersystemen interagieren. Verschiedene existierende Geräte sind in der Lage, jeden der menschlichen Sinne mit synthetischen Reizen zu stimulieren. Hierdurch verschwimmt zunehmend die Grenze zwischen der realen und der virtuellen Welt. Um eindrucksstarke und praktische Mixed-Reality-Erfahrungen zu kreieren, müssen Designer und Entwicklerinnen die künftigen Herausforderungen und neuen Möglichkeiten verstehen. In dieser Dissertation präsentieren wir eine neue Taxonomie zur Kategorisierung von Mixed-Reality-Erfahrungen sowie Richtlinien für die Gestaltung von solchen. Wir stellen die Ergebnisse von sieben Studien vor, in denen die Herausforderungen und Chancen von Mixed-Reality-Erfahrungen, die Auswirkungen von Modalitäten und Interaktionstechniken auf die Benutzererfahrung und die Möglichkeiten zur Verbesserung dieser Erfahrungen untersucht werden. Wir beginnen mit einer Studie, in der die Haltung der nutzenden Person gegenüber Mixed Reality in häuslichen und Bildungsumgebungen analysiert wird. In sechs weiteren Fallstudien wird jeweils ein Aspekt der Realität oder Virtualität untersucht. In der ersten Fallstudie wird mithilfe eines schwebenden und steuerbaren Projektors untersucht, wie die Wahrnehmung der realen Welt erweitert werden kann, ohne dabei die Person mit Technologie auszustatten. Wir zeigen, dass die Darstellung von in-situ-Anweisungen für Navigationsaufgaben zu einer deutlich höheren Fähigkeit führt, Sehenswürdigkeiten der realen Welt zu beobachten und wiederzufinden. In der zweiten Fallstudie erweitern wir die Wahrnehmung der Realität durch Überlagerung von Echtzeitinformationen, die für das menschliche Auge normalerweise unsichtbar sind. Durch die Erweiterung des menschlichen Sehvermögens ermöglichen wir den Anwender:innen, Wärmestrahlung visuell wahrzunehmen. Darüber hinaus untersuchen wir, wie sich das Ersetzen von physischen Komponenten durch nicht funktionale, aber greifbare Replikate oder durch die vollständig virtuelle Darstellung auswirkt. In der dritten Fallstudie untersuchen wir, wie virtuelle Realitäten verbessert werden können, damit eine Person, die in der virtuellen Welt verweilt, Text auf einer physischen Tastatur eingeben kann. Unser Versuchsdemonstrator detektiert die Hände und die Tastatur, zeigt diese in der vermischen Realität an und ermöglicht somit die verbesserte Texteingaben. Unsere Analyse der Texteingabequalität zeigte die Wichtigkeit und Wirkung verschiedener Handdarstellungen. Anschließend untersuchen wir, wie man Virtualität berühren kann, indem wir generisches haptisches Feedback für virtuelle Realitäten simulieren. Wir zeigen, wie Quadrokopter taktiles Feedback ermöglichen und dadurch das Präsenzgefühl deutlich steigern können. Unsere letzte Fallstudie untersucht die Benutzerfreundlichkeit und den Eingaberaum von Smartphones in Mixed-Reality-Umgebungen. Hierbei wird das Smartphone der Person als Eingabegerät mit einem sekundären physischen Bildschirm verbunden, um die Ein- und Ausgabemodalitäten zu erweitern. Basierend auf unseren Erkenntnissen aus den einzelnen Fallstudien haben wir eine neuartige Taxonomie zur Kategorisierung von Mixed-Reality-Erfahrungen sowie Richtlinien für die Gestaltung von solchen entwickelt. Die Taxonomie basiert auf dem menschlichen Sinnessystem und den Artikulationsfähigkeiten. Wir stellen die vielseitige Verwendbarkeit vor und setzen unsere Fallstudien in Kontext, indem wir sie innerhalb des taxonomischen Raums einordnen. Die Gestaltungsrichtlinien sind in nutzerzentrierte und technologiezentrierte Richtlinien unterteilt. Es ist unsere Anliegen, dass diese Gestaltungsrichtlinien zu einer erfolgreichen Zukunft von Mixed-Reality-Systemen beitragen und gleichzeitig die neuen Interaktionsparadigmen hervorheben

Improving command selection in smart environments by exploiting spatial constancy

With the a steadily increasing number of digital devices, our environments are becoming increasingly smarter: we can now use our tablets to control our TV, access our recipe database while cooking, and remotely turn lights on and off. Currently, this Human-Environment Interaction (HEI) is limited to in-place interfaces, where people have to walk up to a mounted set of switches and buttons, and navigation-based interaction, where people have to navigate on-screen menus, for example on a smart-phone, tablet, or TV screen. Unfortunately, there are numerous scenarios in which neither of these two interaction paradigms provide fast and convenient access to digital artifacts and system commands. People, for example, might not want to touch an interaction device because their hands are dirty from cooking: they want device-free interaction. Or people might not want to have to look at a screen because it would interrupt their current task: they want system-feedback-free interaction. Currently, there is no interaction paradigm for smart environments that allows people for these kinds of interactions. In my dissertation, I introduce Room-based Interaction to solve this problem of HEI. With room-based interaction, people associate digital artifacts and system commands with real-world objects in the environment and point toward these real-world proxy objects for selecting the associated digital artifact. The design of room-based interaction is informed by a theoretical analysis of navigation- and pointing-based selection techniques, where I investigated the cognitive systems involved in executing a selection. An evaluation of room-based interaction in three user studies and a comparison with existing HEI techniques revealed that room-based interaction solves many shortcomings of existing HEI techniques: the use of real-world proxy objects makes it easy for people to learn the interaction technique and to perform accurate pointing gestures, and it allows for system-feedback-free interaction; the use of the environment as flat input space makes selections fast; the use of mid-air full-arm pointing gestures allows for device-free interaction and increases awareness of other’s interactions with the environment. Overall, I present an alternative selection paradigm for smart environments that is superior to existing techniques in many common HEI-scenarios. This new paradigm can make HEI more user-friendly, broaden the use cases of smart environments, and increase their acceptance for the average user

Dynamic motion coupling of body movement for input control

Touchless gestures are used for input when touch is unsuitable or unavailable, such as when interacting with displays that are remote, large, public, or when touch is prohibited for hygienic reasons. Traditionally user input is spatially or semantically mapped to system output, however, in the context of touchless gestures these interaction principles suffer from several disadvantages including memorability, fatigue, and ill-defined mappings. This thesis investigates motion correlation as the third interaction principle for touchless gestures, which maps user input to system output based on spatiotemporal matching of reproducible motion. We demonstrate the versatility of motion correlation by using movement as the primary sensing principle, relaxing the restrictions on how a user provides input. Using TraceMatch, a novel computer vision-based system, we show how users can provide effective input through investigation of input performance with different parts of the body, and how users can switch modes of input spontaneously in realistic application scenarios. Secondly, spontaneous spatial coupling shows how motion correlation can bootstrap spatial input, allowing any body movement, or movement of tangible objects, to be appropriated for ad hoc touchless pointing on a per interaction basis. We operationalise the concept in MatchPoint, and demonstrate the unique capabilities through an exploration of the design space with application examples. Finally, we explore how users synchronise with moving targets in the context of motion correlation, revealing how simple harmonic motion leads to better synchronisation. Using the insights gained we explore the robustness of algorithms used for motion correlation, showing how it is possible to successfully detect a user's intent to interact whilst suppressing accidental activations from common spatial and semantic gestures. Finally, we look across our work to distil guidelines for interface design, and further considerations of how motion correlation can be used, both in general and for touchless gestures

Practical, appropriate, empirically-validated guidelines for designing educational games

There has recently been a great deal of interest in the potential of computer games to function as innovative educational tools. However, there is very little evidence of games fulfilling that potential. Indeed, the process of merging the disparate goals of education and games design appears problematic, and there are currently no practical guidelines for how to do so in a coherent manner. In this paper, we describe the successful, empirically validated teaching methods developed by behavioural psychologists and point out how they are uniquely suited to take advantage of the benefits that games offer to education. We conclude by proposing some practical steps for designing educational games, based on the techniques of Applied Behaviour Analysis. It is intended that this paper can both focus educational games designers on the features of games that are genuinely useful for education, and also introduce a successful form of teaching that this audience may not yet be familiar with