606 research outputs found
Ubiquitous Cell-Free Massive MIMO Communications
Since the first cellular networks were trialled in the 1970s, we have
witnessed an incredible wireless revolution. From 1G to 4G, the massive traffic
growth has been managed by a combination of wider bandwidths, refined radio
interfaces, and network densification, namely increasing the number of antennas
per site. Due its cost-efficiency, the latter has contributed the most. Massive
MIMO (multiple-input multiple-output) is a key 5G technology that uses massive
antenna arrays to provide a very high beamforming gain and spatially
multiplexing of users, and hence, increases the spectral and energy efficiency.
It constitutes a centralized solution to densify a network, and its performance
is limited by the inter-cell interference inherent in its cell-centric design.
Conversely, ubiquitous cell-free Massive MIMO refers to a distributed Massive
MIMO system implementing coherent user-centric transmission to overcome the
inter-cell interference limitation in cellular networks and provide additional
macro-diversity. These features, combined with the system scalability inherent
in the Massive MIMO design, distinguishes ubiquitous cell-free Massive MIMO
from prior coordinated distributed wireless systems. In this article, we
investigate the enormous potential of this promising technology while
addressing practical deployment issues to deal with the increased
back/front-hauling overhead deriving from the signal co-processing.Comment: Published in EURASIP Journal on Wireless Communications and
Networking on August 5, 201
Design, Modeling, and Performance Analysis of Multi-Antenna Heterogeneous Cellular Networks
This paper presents a stochastic geometry-based framework for the design and analysis of downlink multi-user multiple-input multiple-output (MIMO) heterogeneous cellular networks with linear zero-forcing transmit precoding and receive combining, assuming Rayleigh fading channels and perfect channel state information. The generalized tiers of base stations may differ in terms of their Poisson point process spatial density, number of transmit antennas, transmit power, artificial-biasing weight, and number of user equipments served per resource block. The spectral efficiency of a typical user equipped with multiple receive antennas is characterized using a non-direct moment-generating-function-based methodology with closed-form expressions of the useful received signal and aggregate network interference statistics systematically derived. In addition, the area spectral efficiency is formulated under different space-division multiple-access and single-user beamforming transmission schemes. We examine the impact of different cellular network deployments, propagation conditions, antenna configurations, and MIMO setups on the achievable performance through theoretical and simulation studies. Based on the state-of-the-art system parameters, the results highlight the inherent limitations of baseline single-input single-output transmission and conventional sparse macro-cell deployment, as well as the promising potential of multi-antenna communications and small-cell solution in interference-limited cellular environments
A Stochastic Geometric Analysis of Device-to-Device Communications Operating over Generalized Fading Channels
Device-to-device (D2D) communications are now considered as an integral part
of future 5G networks which will enable direct communication between user
equipment (UE) without unnecessary routing via the network infrastructure. This
architecture will result in higher throughputs than conventional cellular
networks, but with the increased potential for co-channel interference induced
by randomly located cellular and D2D UEs. The physical channels which
constitute D2D communications can be expected to be complex in nature,
experiencing both line-of-sight (LOS) and non-LOS (NLOS) conditions across
closely located D2D pairs. As well as this, given the diverse range of
operating environments, they may also be subject to clustering of the scattered
multipath contribution, i.e., propagation characteristics which are quite
dissimilar to conventional Rayeligh fading environments. To address these
challenges, we consider two recently proposed generalized fading models, namely
and , to characterize the fading behavior in D2D
communications. Together, these models encompass many of the most widely
encountered and utilized fading models in the literature such as Rayleigh, Rice
(Nakagami-), Nakagami-, Hoyt (Nakagami-) and One-Sided Gaussian. Using
stochastic geometry we evaluate the rate and bit error probability of D2D
networks under generalized fading conditions. Based on the analytical results,
we present new insights into the trade-offs between the reliability, rate, and
mode selection under realistic operating conditions. Our results suggest that
D2D mode achieves higher rates over cellular link at the expense of a higher
bit error probability. Through numerical evaluations, we also investigate the
performance gains of D2D networks and demonstrate their superiority over
traditional cellular networks.Comment: Submitted to IEEE Transactions on Wireless Communication
NON-ORTHOGONAL MULTIPLE ACCESS: A COMPREHENSIVE ANALYTICAL STUDY AND OPTIMISATION IN FADING CHANNELS
A Comprehensive Analysis of 5G Heterogeneous Cellular Systems operating over - Shadowed Fading Channels
Emerging cellular technologies such as those proposed for use in 5G
communications will accommodate a wide range of usage scenarios with diverse
link requirements. This will include the necessity to operate over a versatile
set of wireless channels ranging from indoor to outdoor, from line-of-sight
(LOS) to non-LOS, and from circularly symmetric scattering to environments
which promote the clustering of scattered multipath waves. Unfortunately, many
of the conventional fading models adopted in the literature to develop network
models lack the flexibility to account for such disparate signal propagation
mechanisms. To bridge the gap between theory and practical channels, we
consider - shadowed fading, which contains as special cases, the
majority of the linear fading models proposed in the open literature, including
Rayleigh, Rician, Nakagami-m, Nakagami-q, One-sided Gaussian, -,
-, and Rician shadowed to name but a few. In particular, we apply an
orthogonal expansion to represent the - shadowed fading
distribution as a simplified series expression. Then using the series
expressions with stochastic geometry, we propose an analytic framework to
evaluate the average of an arbitrary function of the SINR over -
shadowed fading channels. Using the proposed method, we evaluate the spectral
efficiency, moments of the SINR, bit error probability and outage probability
of a -tier HetNet with classes of BSs, differing in terms of the
transmit power, BS density, shadowing characteristics and small-scale fading.
Building upon these results, we provide important new insights into the network
performance of these emerging wireless applications while considering a diverse
range of fading conditions and link qualities
Linear Precoding Based on Polynomial Expansion: Large-Scale Multi-Cell MIMO Systems
Large-scale MIMO systems can yield a substantial improvement in spectral
efficiency for future communication systems. Due to the finer spatial
resolution achieved by a huge number of antennas at the base stations, these
systems have shown to be robust to inter-user interference and the use of
linear precoding is asymptotically optimal. However, most precoding schemes
exhibit high computational complexity as the system dimensions increase. For
example, the near-optimal RZF requires the inversion of a large matrix. This
motivated our companion paper, where we proposed to solve the issue in
single-cell multi-user systems by approximating the matrix inverse by a
truncated polynomial expansion (TPE), where the polynomial coefficients are
optimized to maximize the system performance. We have shown that the proposed
TPE precoding with a small number of coefficients reaches almost the
performance of RZF but never exceeds it. In a realistic multi-cell scenario
involving large-scale multi-user MIMO systems, the optimization of RZF
precoding has thus far not been feasible. This is mainly attributed to the high
complexity of the scenario and the non-linear impact of the necessary
regularizing parameters. On the other hand, the scalar weights in TPE precoding
give hope for possible throughput optimization. Following the same methodology
as in the companion paper, we exploit random matrix theory to derive a
deterministic expression for the asymptotic SINR for each user. We also provide
an optimization algorithm to approximate the weights that maximize the
network-wide weighted max-min fairness. The optimization weights can be used to
mimic the user throughput distribution of RZF precoding. Using simulations, we
compare the network throughput of the TPE precoding with that of the suboptimal
RZF scheme and show that our scheme can achieve higher throughput using a TPE
order of only 3
- …