Discrete Wavelet Transforms

The discrete wavelet transform (DWT) algorithms have a firm position in processing of signals in several areas of research and industry. As DWT provides both octave-scale frequency and spatial timing of the analyzed signal, it is constantly used to solve and treat more and more advanced problems. The present book: Discrete Wavelet Transforms: Algorithms and Applications reviews the recent progress in discrete wavelet transform algorithms and applications. The book covers a wide range of methods (e.g. lifting, shift invariance, multi-scale analysis) for constructing DWTs. The book chapters are organized into four major parts. Part I describes the progress in hardware implementations of the DWT algorithms. Applications include multitone modulation for ADSL and equalization techniques, a scalable architecture for FPGA-implementation, lifting based algorithm for VLSI implementation, comparison between DWT and FFT based OFDM and modified SPIHT codec. Part II addresses image processing algorithms such as multiresolution approach for edge detection, low bit rate image compression, low complexity implementation of CQF wavelets and compression of multi-component images. Part III focuses watermaking DWT algorithms. Finally, Part IV describes shift invariant DWTs, DC lossless property, DWT based analysis and estimation of colored noise and an application of the wavelet Galerkin method. The chapters of the present book consist of both tutorial and highly advanced material. Therefore, the book is intended to be a reference text for graduate students and researchers to obtain state-of-the-art knowledge on specific applications

Algorithms and Architectures for Secure Embedded Multimedia Systems

Embedded multimedia systems provide real-time video support for applications in entertainment (mobile phones, internet video websites), defense (video-surveillance and tracking) and public-domain (tele-medicine, remote and distant learning, traffic monitoring and management). With the widespread deployment of such real-time embedded systems, there has been an increasing concern over the security and authentication of concerned multimedia data. While several (software) algorithms and hardware architectures have been proposed in the research literature to support multimedia security, these fail to address embedded applications whose performance specifications have tighter constraints on computational power and available hardware resources. The goals of this dissertation research are two fold: 1. To develop novel algorithms for joint video compression and encryption. The proposed algorithms reduce the computational requirements of multimedia encryption algorithms. We propose an approach that uses the compression parameters instead of compressed bitstream for video encryption. 2. Hardware acceleration of proposed algorithms over reconfigurable computing platforms such as FPGA and over VLSI circuits. We use signal processing knowledge to make the algorithms suitable for hardware optimizations and try to reduce the critical path of circuits using hardware-specific optimizations. The proposed algorithms ensures a considerable level of security for low-power embedded systems such as portable video players and surveillance cameras. These schemes have zero or little compression losses and preserve the desired properties of compressed bitstream in encrypted bitstream to ensure secure and scalable transmission of videos over heterogeneous networks. They also support indexing, search and retrieval in secure multimedia digital libraries. This property is crucial not only for police and armed forces to retrieve information about a suspect from a large video database of surveillance feeds, but extremely helpful for data centers (such as those used by youtube, aol and metacafe) in reducing the computation cost in search and retrieval of desired videos

ReSCon '09, Research Student Conference: Book of Abstracts

The second SED Research Student Conference (ReSCon2009) was hosted over three days, 22-24 June 2009, in the Lecture Centre at Brunel University. The conference consisted of technical presentations, a poster session and social events. The abstracts and presentations were the result of ongoing research by postgraduate research students from the School of Engineering and Design at Brunel University. The conference is held annually, and ReSCon plays a key role in contributing to research and innovations within the School

Técnicas de compresión de imágenes hiperespectrales sobre hardware reconfigurable

Tesis de la Universidad Complutense de Madrid, Facultad de Informática, leída el 18-12-2020Sensors are nowadays in all aspects of human life. When possible, sensors are used remotely. This is less intrusive, avoids interferces in the measuring process, and more convenient for the scientist. One of the most recurrent concerns in the last decades has been sustainability of the planet, and how the changes it is facing can be monitored. Remote sensing of the earth has seen an explosion in activity, with satellites now being launched on a weekly basis to perform remote analysis of the earth, and planes surveying vast areas for closer analysis...Los sensores aparecen hoy en día en todos los aspectos de nuestra vida. Cuando es posible, de manera remota. Esto es menos intrusivo, evita interferencias en el proceso de medida, y además facilita el trabajo científico. Una de las preocupaciones recurrentes en las últimas décadas ha sido la sotenibilidad del planeta, y cómo menitoirzar los cambios a los que se enfrenta. Los estudios remotos de la tierra han visto un gran crecimiento, con satélites lanzados semanalmente para analizar la superficie, y aviones sobrevolando grades áreas para análisis más precisos...Fac. de InformáticaTRUEunpu

Otimização de soluções de fotónica integrada para sistemas óticos de nova geração

Next generation optical systems can highly benefit from optimized photonic integrated solutions. Photonic integrated circuits (PIC) appear as a promising technology under the current demand for flexibility/reconfigurability in optical systems and telecommunications networks. PIC-based optical systems offer an efficient and cost-effective solution to data transmission increasing claims. In order to contribute to the development of integrated photonic technology, optimized PIC solutions addressing different steps of the PIC development chain, mainly design, testing, and packaging processes, are investigated. Optical signal data compression techniques are progressing to sustain the fast processing/storing of large amounts of bandwidth demanding data, with the advantage of resorting to photonic integrated solutions for the implementation of optical transforms, e.g., Haar transform (HT). This demand motivated the research of an optimized PIC design solution in silicon nitride (Si3N4) based platform comprising a two-level HT network for compression, and a switching network as a framework that supplies all logical inputs of the HT network for testing/characterization purposes. Optimized design models for the multimode interference key building block structure of the PIC design solution, are proposed. Additionally, a first test and characterization of PIC solutions implementing the HT for compression applications in indium phosphide (InP) based platform and in a new organic-inorganic hybrid material were realized. Taking advantage of a tunable lattice filter dispersion compensator in Si3N4-based integrated platform, it was demonstrated a real-time extended reach PAM-4 transmission over 40 km enabled by the photonic integrated dispersion compensator, with application in data center interconnects. Under photonic integrated high-Q resonators need for accurate performance measurement, a technique based on RF calibrated Mach-Zehnder interferometer, and Brillouin gain measurements through Lorentzian fitting analysis were successfully attained. Finally, as technical and functional requirements of PIC demand a thorough characterization/testing to provide an accurate prediction of its performance, and current testing platforms can be expensive and have low flexibility, a proof of concept of a new soft-packaging flexible platform for photonic integrated processors and spatial division multiplexing systems, based in spatial light modulation operation principle is proposed.Os sistemas óticos de nova geração beneficiam com a otimização de fotónica integrada. Com os circuitos de fotónica integrada (PIC) avançados a surgir como uma tecnologia promissora, dentro da crescente procura por flexibilidade/ reconfigurabilidade dos sistemas óticos e redes de telecomunicações. Os sistemas óticos baseados em PIC oferecem soluções eficientes e rentáveis em resposta às necessidades crescentes de transmissão de dados. De modo a contribuir para o desenvolvimento tecnológico associado à fotónica integrada, são investigados no âmbito desta dissertação diferentes soluções otimizadas de PIC, abordando diferentes estágios do seu desenvolvimento, nomeadamente projeto/design, teste e encapsulamento. Técnicas de compressão de sinais óticos estão a progredir no sentido de apoiar a expansão de velocidade de processamento e quantidade de armazenamento com elevada largura de banda associada. São esperadas vantagens recorrendo a PIC para a implementação de transformadas óticas, e.g., transformada de Haar (HT). Esta necessidade motivou a investigação de soluções de PIC com design otimizado, desenvolvidas em plataforma integrada de nitreto de silício (Si3N4). O PIC desenhado é constituído por uma rede 2D a executar a HT para fins de compressão e uma rede de comutação para produzir todas as entradas lógicas esperadas para teste e caracterização. São propostos modelos de design otimizados para a estrutura elementar que compõe o PIC, i.e., componente de interferência multimodal. Adicionalmente, foi realizado o primeiro teste e caracterização experimental de um PIC implementando a HT para fins de compressão, numa plataforma integrada de fosfato de índio (InP) e num material orgânico-inorgânico híbrido. Tirando partido de um filtro sintonizável para compensação de dispersão, desenvolvido em plataforma integrada de Si3N4, foi demostrado um link de transmissão alargada (40 km) em modulação PAM-4, com possível aplicação em centros de processamento de dados de interconexão. A necessidade de medições precisas de desempenho para a caracterização efetiva de soluções integradas de ressoadores de elevado fator de qualidade, motivou a implementação de uma técnica de medição eficaz. Esta é baseada num interferómetro de Mach-Zehnder calibrado em rádio frequência e na realização de mediações de ganho de Brillouin por análise Lorentziana de ajuste de curva. Por fim, tendo em conta os rigorosos requisitos técnicos e funcionais associados ao teste/caracterização precisa de PIC e o facto de as atuais soluções serem dispendiosas e pouco flexíveis. Uma prova de conceito de uma nova plataforma flexível de encapsulamento por software é proposta com aplicação em processadores PIC e sistemas com multiplexagem por divisão espacial.Programa Doutoral em Telecomunicaçõe

Energy efficient hardware acceleration of multimedia processing tools

The world of mobile devices is experiencing an ongoing trend of feature enhancement and generalpurpose multimedia platform convergence. This trend poses many grand challenges, the most pressing being their limited battery life as a consequence of delivering computationally demanding features. The envisaged mobile application features can be considered to be accelerated by a set of underpinning hardware blocks Based on the survey that this thesis presents on modem video compression standards and their associated enabling technologies, it is concluded that tight energy and throughput constraints can still be effectively tackled at algorithmic level in order to design re-usable optimised hardware acceleration cores. To prove these conclusions, the work m this thesis is focused on two of the basic enabling technologies that support mobile video applications, namely the Shape Adaptive Discrete Cosine Transform (SA-DCT) and its inverse, the SA-IDCT. The hardware architectures presented in this work have been designed with energy efficiency in mind. This goal is achieved by employing high level techniques such as redundant computation elimination, parallelism and low switching computation structures. Both architectures compare favourably against the relevant pnor art in the literature. The SA-DCT/IDCT technologies are instances of a more general computation - namely, both are Constant Matrix Multiplication (CMM) operations. Thus, this thesis also proposes an algorithm for the efficient hardware design of any general CMM-based enabling technology. The proposed algorithm leverages the effective solution search capability of genetic programming. A bonus feature of the proposed modelling approach is that it is further amenable to hardware acceleration. Another bonus feature is an early exit mechanism that achieves large search space reductions .Results show an improvement on state of the art algorithms with future potential for even greater savings

Measurements, Models, Systems and Design

531 s.

Remote Sensing Data Compression

A huge amount of data is acquired nowadays by different remote sensing systems installed on satellites, aircrafts, and UAV. The acquired data then have to be transferred to image processing centres, stored and/or delivered to customers. In restricted scenarios, data compression is strongly desired or necessary. A wide diversity of coding methods can be used, depending on the requirements and their priority. In addition, the types and properties of images differ a lot, thus, practical implementation aspects have to be taken into account. The Special Issue paper collection taken as basis of this book touches on all of the aforementioned items to some degree, giving the reader an opportunity to learn about recent developments and research directions in the field of image compression. In particular, lossless and near-lossless compression of multi- and hyperspectral images still remains current, since such images constitute data arrays that are of extremely large size with rich information that can be retrieved from them for various applications. Another important aspect is the impact of lossless compression on image classification and segmentation, where a reasonable compromise between the characteristics of compression and the final tasks of data processing has to be achieved. The problems of data transition from UAV-based acquisition platforms, as well as the use of FPGA and neural networks, have become very important. Finally, attempts to apply compressive sensing approaches in remote sensing image processing with positive outcomes are observed. We hope that readers will find our book useful and interestin