Data-driven Soft Sensors in the Process Industry

In the last two decades Soft Sensors established themselves as a valuable alternative to the traditional means for the acquisition of critical process variables, process monitoring and other tasks which are related to process control. This paper discusses characteristics of the process industry data which are critical for the development of data-driven Soft Sensors. These characteristics are common to a large number of process industry fields, like the chemical industry, bioprocess industry, steel industry, etc. The focus of this work is put on the data-driven Soft Sensors because of their growing popularity, already demonstrated usefulness and huge, though yet not completely realised, potential. A comprehensive selection of case studies covering the three most important Soft Sensor application fields, a general introduction to the most popular Soft Sensor modelling techniques as well as a discussion of some open issues in the Soft Sensor development and maintenance and their possible solutions are the main contributions of this work

PAC: A Novel Self-Adaptive Neuro-Fuzzy Controller for Micro Aerial Vehicles

There exists an increasing demand for a flexible and computationally efficient controller for micro aerial vehicles (MAVs) due to a high degree of environmental perturbations. In this work, an evolving neuro-fuzzy controller, namely Parsimonious Controller (PAC) is proposed. It features fewer network parameters than conventional approaches due to the absence of rule premise parameters. PAC is built upon a recently developed evolving neuro-fuzzy system known as parsimonious learning machine (PALM) and adopts new rule growing and pruning modules derived from the approximation of bias and variance. These rule adaptation methods have no reliance on user-defined thresholds, thereby increasing the PAC's autonomy for real-time deployment. PAC adapts the consequent parameters with the sliding mode control (SMC) theory in the single-pass fashion. The boundedness and convergence of the closed-loop control system's tracking error and the controller's consequent parameters are confirmed by utilizing the LaSalle-Yoshizawa theorem. Lastly, the controller's efficacy is evaluated by observing various trajectory tracking performance from a bio-inspired flapping-wing micro aerial vehicle (BI-FWMAV) and a rotary wing micro aerial vehicle called hexacopter. Furthermore, it is compared to three distinctive controllers. Our PAC outperforms the linear PID controller and feed-forward neural network (FFNN) based nonlinear adaptive controller. Compared to its predecessor, G-controller, the tracking accuracy is comparable, but the PAC incurs significantly fewer parameters to attain similar or better performance than the G-controller.Comment: This paper has been accepted for publication in Information Science Journal 201

Penguasaan kemahiran generik di kalangan graduan hospitaliti di politeknik : satu kajian berkenaan keperluan industri perhotelan, persepsi pensyarah dan pelajar

Kajian yang dijalankan ini bertujuan untuk mengenal pasti kepentingan kemahiran generik mengikut keperluan industri perhotelan di Malaysia dengan persepsi pensyarah dan persepsi pelajar Jabatan Hospitaliti. Oleh kerana matlamat kurikulum pendidikan kini adalah untuk melahirkan graduan yang dapat memenuhi keperluan pihak industri, maka kajian ini dijalankan untuk menilai hubungan di antara keperluan industri perhotelan di Malaysia dengan persepsi pensyarah dan pelajar Jabatan Hospitaliti di Politeknik. Terdapat 13 kemahiran generik yang diperolehi daripada Kementerian Pelajaran dan Latihan Ontario (1997) dijadikan sebagai skop kepada instrumen kajian. Responden kajian terdiri daripada tiga pihak utama iaitu industri perhotelan di Malaysia yang melibatkan 40 buah hotel yang diwakili oleh MAH Chapter dan jawatankuasa dalam Malaysian Associated of Hotel (MAH), pensyarah Unit Hotel dan Katering dan pelajar semester akhir Diploma Hotel dan Katering di Politeknik Johor Bahru, Johor dan Politeknik Merlimau, Melaka. Kajian rintis yang dijalankan menunjukkan nilai Alpha Cronbach pada 0.8781. Data yang diperolehi dianalisis secara deskriptif dan inferensi dengan menggunakan perisian Statistical Package for Social Science (SPSS) versi 11.5. Melalui dapatan kajian, satu senarai berkenaan kemahiran generik yang diperlukan oleh industri perhotelan telah dapat dihasilkan. Selain itu, senarai kemahiran generik menurut persepsi pensyarah dan juga persepsi pelajar turut dihasilkan. Hasil statistik dan graf garis yang diperolehi menunjukkan terdapat perbezaan di antara kemahiran generik yang diperlukan oleh industri perhotelan di Malaysia dengan kemahiran generik menurut persepsi pensyarah dan persepsi pelajar Politeknik. Dapatan analisis menggunakan korelasi Pearson mendapati bahawa tidak terdapat perhubungan yang signifikan di antara kemahiran generik yang diperlukan oleh industri perhotelan dengan persepsi pensyarah dan persepsi pelajar. Namun begitu, terdapat hubungan yang signifikan di antara persepsi pensyarah dengan persepsi pelajar berkenaan dengan amalan kemahiran generik di Politeknik

Application of Computational Intelligence Techniques to Process Industry Problems

In the last two decades there has been a large progress in the computational intelligence research field. The fruits of the effort spent on the research in the discussed field are powerful techniques for pattern recognition, data mining, data modelling, etc. These techniques achieve high performance on traditional data sets like the UCI machine learning database. Unfortunately, this kind of data sources usually represent clean data without any problems like data outliers, missing values, feature co-linearity, etc. common to real-life industrial data. The presence of faulty data samples can have very harmful effects on the models, for example if presented during the training of the models, it can either cause sub-optimal performance of the trained model or in the worst case destroy the so far learnt knowledge of the model. For these reasons the application of present modelling techniques to industrial problems has developed into a research field on its own. Based on the discussion of the properties and issues of the data and the state-of-the-art modelling techniques in the process industry, in this paper a novel unified approach to the development of predictive models in the process industry is presented

A review on analysis and synthesis of nonlinear stochastic systems with randomly occurring incomplete information

Copyright q 2012 Hongli Dong et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.In the context of systems and control, incomplete information refers to a dynamical system in which knowledge about the system states is limited due to the difficulties in modeling complexity in a quantitative way. The well-known types of incomplete information include parameter uncertainties and norm-bounded nonlinearities. Recently, in response to the development of network technologies, the phenomenon of randomly occurring incomplete information has become more and more prevalent. Such a phenomenon typically appears in a networked environment. Examples include, but are not limited to, randomly occurring uncertainties, randomly occurring nonlinearities, randomly occurring saturation, randomly missing measurements and randomly occurring quantization. Randomly occurring incomplete information, if not properly handled, would seriously deteriorate the performance of a control system. In this paper, we aim to survey some recent advances on the analysis and synthesis problems for nonlinear stochastic systems with randomly occurring incomplete information. The developments of the filtering, control and fault detection problems are systematically reviewed. Latest results on analysis and synthesis of nonlinear stochastic systems are discussed in great detail. In addition, various distributed filtering technologies over sensor networks are highlighted. Finally, some concluding remarks are given and some possible future research directions are pointed out. © 2012 Hongli Dong et al.This work was supported in part by the National Natural Science Foundation of China under Grants 61273156, 61134009, 61273201, 61021002, and 61004067, the Engineering and Physical Sciences Research Council (EPSRC) of the UK under Grant GR/S27658/01, the Royal Society of the UK, the National Science Foundation of the USA under Grant No. HRD-1137732, and the Alexander von Humboldt Foundation of German

Selection of sensors by a new methodology coupling a classification technique and entropy criteria

Complex industrial processes invest a lot of money in sensors and automation devices to monitor and supervise the process in order to guarantee the production quality and the plant and operators safety. Fault detection is one of the multiple tasks of process monitoring and it critically depends on the sensors that measure the significant process variables. Nevertheless, most of the works on fault detection and diagnosis found in literature emphasis more on developing procedures to perform diagnosis given a set of sensors, and less on determining the actual location of sensors for efficient identification of faults. A methodology based on learning and classification techniques and on the information quantity measured by the Entropy concept, is proposed in order to address the problem of sensor location for fault identification. The proposed methodology has been applied to a continuous intensified reactor, the "Open Plate Reactor (OPR)", developed by Alfa Laval and studied at the Laboratory of Chemical Engineering of Toulouse. The different steps of the methodology are explained through its application to the carrying out of an exothermic reaction

Research on Adaptive Neural Network Control System Based on Nonlinear U-Model with Time-Varying Delay

U-model can approximate a large class of smooth nonlinear time-varying delay system to any accuracy by using time-varying delay parameters polynomial. This paper proposes a new approach, namely, U-model approach, to solving the problems of analysis and synthesis for nonlinear systems. Based on the idea of discrete-time U-model with time-varying delay, the identification algorithm of adaptive neural network is given for the nonlinear model. Then, the controller is designed by using the Newton-Raphson formula and the stability analysis is given for the closed-loop nonlinear systems. Finally, illustrative examples are given to show the validity and applicability of the obtained results

Development of Neurofuzzy Architectures for Electricity Price Forecasting

In 20th century, many countries have liberalized their electricity market. This power markets liberalization has directed generation companies as well as wholesale buyers to undertake a greater intense risk exposure compared to the old centralized framework. In this framework, electricity price prediction has become crucial for any market player in their decision‐making process as well as strategic planning. In this study, a prototype asymmetric‐based neuro‐fuzzy network (AGFINN) architecture has been implemented for short‐term electricity prices forecasting for ISO New England market. AGFINN framework has been designed through two different defuzzification schemes. Fuzzy clustering has been explored as an initial step for defining the fuzzy rules while an asymmetric Gaussian membership function has been utilized in the fuzzification part of the model. Results related to the minimum and maximum electricity prices for ISO New England, emphasize the superiority of the proposed model over well‐established learning‐based models

Novel fuzzy logic controllers with self-tuning capability

Two controllers which extend the PD+I fuzzy logic controller to deal with the plant having time varying nonlinear dynamics are proposed. The adaptation ability of the first self tuning PD+I fuzzy logic controller (STPD+I_31) is achieved by adjusting the output scaling factor automatically thereby contributing to significant improvement in performance. Second controller (STPD+I_9) is the simplified version of STPD+I_31 which is designed under the imposed constraint that allows only minimum number of rules in the rule bases. The proposed controllers are compared with two classical nonlinear controllers: the pole placement self tuning PID controller and sliding mode controller. All the controllers are applied to the two-links revolute robot for the tracking control. The tracking performance of STPD+I_31 and STPD+I_9 are much better than the pole placement self tuning PID controller during high speed motions while the performance are comparable at low and medium speed. In addition, STPD+I_31 and STPD+I_9 outperform sliding mode controller using same method of comparison study