Curvature sensing using a hybrid polycarbonate-silica multicore fiber

We report on the development of a novel hybrid glass-polymer multicore fiber integrating three 80 µm polyimide-coated silica fibers inside a 750 µm polycarbonate cladding. By inscribing an array of distributed FBGs along each segment of silica fiber prior to the hybrid fiber drawing, we demonstrate a curvature sensor with an unprecedented precision of 296 pm/m−1 around 1550 nm, about 7 times more sensitive than sensors based on standard 125 µm multicore fibers. As predicted by theory, we show experimentally that the measured curvature is insensitive to temperature and strain. Also, a more precise equation to describe the curvature on a simple bending setup is presented. This new hybrid multicore fiber technology has the potential to be extended over several kilometers and can find high-end applications in 3D shape sensing and structural health monitoring

Arrayed Waveguide Grating-Based Interrogation System for Safety Applications and High-Speed Measurements

This thesis is focused on the design of two interrogation systems for Fiber Bragg Grating (FBG) sensors based on the Wavelength Domain Multiplexing (WDM) by means of the Arrayed Waveguide Grating (AWG) device. The FBG sensors have been employed in a large number of environments thanks to their intrinsic characteristics. To design a measurement system based on the Fiber Optic Sensor (FOS) technology, it is mandatory to make use of an optoelectronic system with the aim to "read" the wavelength shifting performed by the sensors. This latter is named interrogation system and, actually, sets a limit on the employability of the FBG sensors, due to its cost, design complexity and low reliability in some contests. For this reasons, the researchers are constantly looking on new technologies for the design of innovative interrogation systems. The AWG device seems to provide characteristics which cannot be reached with other devices and, due to its passivity, gives the possibility to increase the system speed to let the FBG sensors to be employed also for the detection of high-speed phenomena. Furthermore, thanks to the robustness and reliability of AWG device, is possible to turn an interrogation system into a full analog monitoring system employable in a safety scenario, such as industrial processes or other kind of environments, in which digital processing does not ensure enough reliability

Impact detection techniques using fibre-optic sensors for aerospace & defence

Impact detection techniques are developed for application in the aerospace and defence industries. Optical fibre sensors hold great promise for structural health monitoring systems and methods of interrogating fibre Bragg gratings (FBG) are investigated given the need for dynamic strain capture and multiplexed sensors. An arrayed waveguide grating based interrogator is developed. The relationships between key performance indicators, such as strain range and linearity of response, and parameters such as the FBG length and spectral width are determined. It was found that the inclusion of a semiconductor optical amplifier could increase the signal-to-noise ratio by ~300% as the system moves to its least sensitive. An alternative interrogator is investigated utilising two wave mixing in erbium-doped fibre in order to create an adaptive system insensitive to quasistatic strain and temperature drifts. Dynamic strain sensing was demonstrated at 200 Hz which remained functional while undergoing a temperature shift of 8.5 °C. In addition, software techniques are investigated for locating impact events on a curved composite structure using both time-of-flight triangulation and neural networks. A feature characteristic of composite damage creation is identified in dynamic signals captured during impact. An algorithm is developed which successfully distinguishes between signals characteristic of a non-damaging impact with those from a damaging impact with a classification accuracy of 93 – 96%. Finally, a demonstrator system is produced to exhibit some of the techniques developed in this thesis

Optical Fiber Networks for Remote Fiber Optic Sensors

This paper presents an overview of optical fiber sensor networks for remote sensing. Firstly, the state of the art of remote fiber sensor systems has been considered. We have summarized the great evolution of these systems in recent years; this progress confirms that fiber-optic remote sensing is a promising technology with a wide field of practical applications. Afterwards, the most representative remote fiber-optic sensor systems are briefly explained, discussing their schemes, challenges, pros and cons. Finally, a synopsis of the main factors to take into consideration in the design of a remote sensor system is gathered

Distributed sensing, communications, and power in optical Fibre Smart Sensor networks for structural health monitoring

With distributed optical fibre sensors, a single source, a single detector, and a single fibre can be used for up to 1000 fibre Bragg grating sensors. However, this multiplexing architecture is not robust. Damage to any of these individual components can render the entire sensing system useless. To achieve a robust structural health monitoring system, this type of multiplexing cannot be utilised. To overcome the lack of robustness associated with multiplexing optical fibre sensors together, intelligence along with sensors needs to be distributed around a structure. Distributed Optical Fibre Smarts Sensing (DOFSS) represents a sensing architecture for the structural health monitoring of robust aerospace vehicles. The distribution of intelligence around the structure means that communications and power for the network are a significant consideration. Since optical fibre will be utilised for the sensing, then these “wired” links, can easily be utilised for power. The optical fibre links could also be utilised for the distribution of power around the sensor network. In this work, we investigate the distribution of sensing, communications, and power for DOFSS

Development of a multi-point temperature fiber sensor based on a serial array of optical fiber interferometers

M.Ing. (Electrical and Electronic Engineering)An experimental study of a multi-point optic fibre sensor for monitoring temperature changes is presented. The multi-point optic fibre sensor is made of a serial array of weak-reflectivity identical gratings. The weak-reflectivity identical gratings form the interferometric cavities UV printed on the single mode fibre. The ability to measure temperatures changes at different cavities along the serial array is particularly interesting for the monitoring of power transformers, high temperature furnaces and jet engines. Changes in temperature in each respective cavity is measured based on the spectral shift in the phase of the light from each respective cavity. The performance of the multi-point fibre sensor system is evaluated. Further, a theoretical and experimental investigation of a serial array composed of two cavities of different lengths is conducted. This investigation is aimed at measuring the impact of the overlap of the two distinct cavities in their respective frequency domain and determining the accuracy of the measurement. The result found shows that the sensor phase response is no more linear to temperature changes. It is also found that the nonlinear response of the sensor to temperature changes increases with the magnitude of the overlap

Modern Applications in Optics and Photonics: From Sensing and Analytics to Communication

Optics and photonics are among the key technologies of the 21st century, and offer potential for novel applications in areas such as sensing and spectroscopy, analytics, monitoring, biomedical imaging/diagnostics, and optical communication technology. The high degree of control over light fields, together with the capabilities of modern processing and integration technology, enables new optical measurement systems with enhanced functionality and sensitivity. They are attractive for a range of applications that were previously inaccessible. This Special Issue aims to provide an overview of some of the most advanced application areas in optics and photonics and indicate the broad potential for the future

Hybrid Optical Fiber Sensors for Smart Materials and Structures

There has been a rapid growth in the use of advanced composite materials in a variety of load-bearing structures, for example in aviation for structures such as rotor blades, aircraft fuselage and wing structures. Composite materials embedded with fiber-optic sensors (FOS) have been recognized as one of the prominent enabling technologies for smart materials and structures. The rapid increase in the interest in composite materials embedded with FOS has been driven by numerous applications, such as intelligent composite manufacturing/processing, and safety-related areas in aircrafts. Research has been focused recently on using several optical sensor types working together to form so called “hybrid optical fiber sensors” in order to overcome the limitations of the individual sensor technologies. The main aim of the research described in this thesis is to investigate a hybrid sensing scheme that utilizes polarimetric sensors and FBG sensors working in a complimentary fashion to measure multiple physical parameters in a composite material, with a particular focus on measuring the complex indirect parameters thermal expansion and vibration. The research described in this thesis investigates the performance of a hybrid sensing scheme based on polarimetric sensors and FBG sensors after embedding in a composite material. It is shown that the influence of thermal expansion within a composite material on embedded polarimetric sensors is the main source of errors for embedded fiber sensor strain measurements and that for practical strain sensing applications buffer coated PM-PCF are more suitable for embedding in composite. Further, using a buffer stripped PM-PCF polarimetric sensor, a measurement scheme to measure a composite material\u27s thermal elongation induced strain is proposed. A novel hybrid sensor for simultaneous measurement of strain, temperature and thermal strain is demonstrated by integrating polarimetric sensors based on acrylate coated high bi-refringent polarization maintaining photonic crystal fiber (HB-PM-PCF), and a coating stripped HB-PM-PCF sensor together with an FBG sensor. Flexible demodulation modules that can be embedded or surface attached is a challenge for composite materials containing fiber-optic sensors. In this thesis an interrogation method that allows intensity domain operation of hybrid sensor is demonstrated. Further focusing towards the miniaturization of the hybrid sensor interrogator, a miniaturized flexible interrogator for the demonstrated hybrid sensing scheme embedded in a composite material is also designed. Low frequency vibration measurements are performed for glass fibre-reinforced composite material samples with two different strain-sensitive polarimetric sensor types embedded. It is shown that the strain sensitivity of polarimetric sensors limits the vibration measurements to a certain range of vibration amplitudes. A polarimetric sensor based buffer stripped HB-PM-PCF is demonstrated for monitoring the different stages of the curing process for a Mageneto-Rheological composite material. By providing information about multiple parameters such as strain, temperature, thermal strain, vibration amplitude and vibration frequency the proposed and demonstrated hybrid sensing approach has a high potential to change the paradigm for smart material design in the future