Pipelined Two-Operand Modular Adders

Pipelined two-operand modular adder (TOMA) is one of basic components used in digital signal processing (DSP) systems that use the residue number system (RNS). Such modular adders are used in binary/residue and residue/binary converters, residue multipliers and scalers as well as within residue processing channels. The design of pipelined TOMAs is usually obtained by inserting an appriopriate number of latch layers inside a nonpipelined TOMA structure. Hence their area is also determined by the number of latches and the delay by the number of latch layers. In this paper we propose a new pipelined TOMA that is based on a new TOMA, that has the smaller area and smaller delay than other known structures. Comparisons are made using data from the very large scale of integration (VLSI) standard cell library

Efficient modular arithmetic units for low power cryptographic applications

The demand for high security in energy constrained devices such as mobiles and PDAs is growing rapidly. This leads to the need for efficient design of cryptographic algorithms which offer data integrity, authentication, non-repudiation and confidentiality of the encrypted data and communication channels. The public key cryptography is an ideal choice for data integrity, authentication and non-repudiation whereas the private key cryptography ensures the confidentiality of the data transmitted. The latter has an extremely high encryption speed but it has certain limitations which make it unsuitable for use in certain applications. Numerous public key cryptographic algorithms are available in the literature which comprise modular arithmetic modules such as modular addition, multiplication, inversion and exponentiation. Recently, numerous cryptographic algorithms have been proposed based on modular arithmetic which are scalable, do word based operations and efficient in various aspects. The modular arithmetic modules play a crucial role in the overall performance of the cryptographic processor. Hence, better results can be obtained by designing efficient arithmetic modules such as modular addition, multiplication, exponentiation and squaring. This thesis is organized into three papers, describes the efficient implementation of modular arithmetic units, application of these modules in International Data Encryption Algorithm (IDEA). Second paper describes the IDEA algorithm implementation using the existing techniques and using the proposed efficient modular units. The third paper describes the fault tolerant design of a modular unit which has online self-checking capability --Abstract, page iv

Residue Number System Based Building Blocks for Applications in Digital Signal Processing

Předkládaná disertační práce se zabývá návrhem základních bloků v systému zbytkových tříd pro zvýšení výkonu aplikací určených pro digitální zpracování signálů (DSP). Systém zbytkových tříd (RNS) je neváhová číselná soustava, jež umožňuje provádět paralelizovatelné, vysokorychlostní, bezpečné a proti chybám odolné aritmetické operace, které jsou zpracovávány bez přenosu mezi řády. Tyto vlastnosti jej činí značně perspektivním pro použití v DSP aplikacích náročných na výpočetní výkon a odolných proti chybám. Typický RNS systém se skládá ze tří hlavních částí: převodníku z binárního kódu do RNS, který počítá ekvivalent vstupních binárních hodnot v systému zbytkových tříd, dále jsou to paralelně řazené RNS aritmetické jednotky, které provádějí aritmetické operace s operandy již převedenými do RNS. Poslední část pak tvoří převodník z RNS do binárního kódu, který převádí výsledek zpět do výchozího binárního kódu. Hlavním cílem této disertační práce bylo navrhnout nové struktury základních bloků výše zmiňovaného systému zbytkových tříd, které mohou být využity v aplikacích DSP. Tato disertační práce předkládá zlepšení a návrhy nových struktur komponent RNS, simulaci a také ověření jejich funkčnosti prostřednictvím implementace v obvodech FPGA. Kromě návrhů nové struktury základních komponentů RNS je prezentován také podrobný výzkum různých sad modulů, který je srovnává a determinuje nejefektivnější sadu pro různé dynamické rozsahy. Dalším z klíčových přínosů disertační práce je objevení a ověření podmínky určující výběr optimální sady modulů, která umožňuje zvýšit výkonnost aplikací DSP. Dále byla navržena aplikace pro zpracování obrazu využívající RNS, která má vůči klasické binární implementanci nižší spotřebu a vyšší maximální pracovní frekvenci. V závěru práce byla vyhodnocena hlavní kritéria při rozhodování, zda je vhodnější pro danou aplikaci využít binární číselnou soustavu nebo RNS.This doctoral thesis deals with designing residue number system based building blocks to enhance the performance of digital signal processing applications. The residue number system (RNS) is a non-weighted number system that provides carry-free, parallel, high speed, secure and fault tolerant arithmetic operations. These features make it very attractive to be used in high-performance and fault tolerant digital signal processing (DSP) applications. A typical RNS system consists of three main components; the first one is the binary to residue converter that computes the RNS equivalent of the inputs represented in the binary number system. The second component in this system is parallel residue arithmetic units that perform arithmetic operations on the operands already represented in RNS. The last component is the residue to binary converter, which converts the outputs back into their binary representation. The main aim of this thesis was to propose novel structures of the basic components of this system in order to be later used as fundamental units in DSP applications. This thesis encloses improving and designing novel structures of these components, simulating and verifying their efficiency via FPGA implementation. In addition to suggesting novel structures of basic RNS components, a detailed study on different moduli sets that compares and determines the most efficient one for different dynamic range requirements is also presented. One of the main outcomes of this thesis is concluding and verifying the main condition that should be met when choosing a moduli set, in order to improve the timing performance of a DSP application. An RNS-based image processing application is also proposed. Its efficiency, in terms of timing performance and power consumption, is proved via comparing it with a binary-based one. Finally, the main considerations that should be taken into account when choosing to use the binary number system or RNS are also discussed in details.

Efficient Computation and FPGA implementation of Fully Homomorphic Encryption with Cloud Computing Significance

Homomorphic Encryption provides unique security solution for cloud computing. It ensures not only that data in cloud have confidentiality but also that data processing by cloud server does not compromise data privacy. The Fully Homomorphic Encryption (FHE) scheme proposed by Lopez-Alt, Tromer, and Vaikuntanathan (LTV), also known as NTRU(Nth degree truncated polynomial ring) based method, is considered one of the most important FHE methods suitable for practical implementation. In this thesis, an efficient algorithm and architecture for LTV Fully Homomorphic Encryption is proposed. Conventional linear feedback shift register (LFSR) structure is expanded and modified for performing the truncated polynomial ring multiplication in LTV scheme in parallel. Novel and efficient modular multiplier, modular adder and modular subtractor are proposed to support high speed processing of LFSR operations. In addition, a family of special moduli are selected for high speed computation of modular operations. Though the area keeps the complexity of O(Nn^2) with no advantage in circuit level. The proposed architecture effectively reduces the time complexity from O(N log N) to linear time, O(N), compared to the best existing works. An FPGA implementation of the proposed architecture for LTV FHE is achieved and demonstrated. An elaborate comparison of the existing methods and the proposed work is presented, which shows the proposed work gains significant speed up over existing works

Sign Detection and Signed Integer Comparison for the 3-Moduli Set {2^n±1,2^(n+k)}

Comparison, division and sign detection are considered complicated operations in residue number system (RNS). A straightforward solution is to convert RNS numbers into binary formats and then perform complicated operations using conventional binary operators. If efficient circuits are provided for comparison, division and sign detection, the application of RNS can be extended to the cases including these operations.For RNS comparison in the 3-moduli set , we have only found one hardware realization. In this paper, an efficient RNS comparator is proposed for the moduli set  which employs sign detection method and operates more efficient than its counterparts. The proposed sign detector and comparator utilize dynamic range partitioning (DRP), which has been recently presented for unsigned RNS comparison. Delay and cost of the proposed comparator are lower than the previous works and makes it appropriate for RNS applications with limited delay and cost

The use of reversible logic gates in the design of residue number systems

Reversible computing is an emerging technique to achieve ultra-low-power circuits. Reversible arithmetic circuits allow for achieving energy-efficient high-performance computational systems. Residue number systems (RNS) provide parallel and fault-tolerant additions and multiplications without carry propagation between residue digits. The parallelism and fault-tolerance features of RNS can be leveraged to achieve high-performance reversible computing. This paper proposed RNS full reversible circuits, including forward converters, modular adders and multipliers, and reverse converters used for a class of RNS moduli sets with the composite form {2k, 2p-1}. Modulo 2n-1, 2n, and 2n+1 adders and multipliers were designed using reversible gates. Besides, reversible forward and reverse converters for the 3-moduli set {2n-1, 2n+k, 2n+1} have been designed. The proposed RNS-based reversible computing approach has been applied for consecutive multiplications with an improvement of above 15% in quantum cost after the twelfth iteration, and above 27% in quantum depth after the ninth iteration. The findings show that the use of the proposed RNS-based reversible computing in convolution results in a significant improvement in quantum depth in comparison to conventional methods based on weighted binary adders and multipliers

Parallel-prefix structures for binary and modulo {2n - 1, 2n, 2n + 1} adders

Adders are the among the most essential arithmetic units within digital systems. Parallel-prefix structures are efficient for adders because of their regular topology and logarithmic delay. However, building parallel-prefix adders are barely discussed in literature. This work puts emphasis on how to build prefix trees and simple algorithms for building these architectures. One particular modification of adders is for use with modulo arithmetic. The most common type of modulo adders are modulo 2n -1 and modulo 2n + 1 adders because they have a common base that is a power of 2. In order to improve their speed, parallel-prefix structures can also be employed for modulo 2n +- 1 adders. This dissertation presents the formation of several binary and modulo prefix architectures and their modifications using Ling's algorithm. For all binary and modulo adders, both algorithmic and quantitative analysis are provided to compare the performance of different architectures. Furthermore, to see how process impact the design, three technologies, from deep submicron to nanometer range, are utilized to collect the quantitative data

Digital signal processing application based on residue number system

Tato práce se zabývá systémem zbytkových tříd a jeho aplikacemi v digitálních obvodech. První část se zabývá VHDL návrhem různých typů sčítaček v systému zbytkových tříd a jejich porovnání se standartními sčítačkami. V druhé části je implementován obrázkový processor který pracuje v systému zbytkových tříd a jeho výkonostní analýza. V textu je popsán postup návrhu a jsou prezentovány výsledky analýz.This work deals with residue number system and its applications in digital circuits. The first part is VHDL design of different adder types in residue number system and their comparison with regular adders. The second part is VHDL implementation of image processor that computes in residue number system and its performance analysis. Presented text contains description of design procedures and presentation of analysis results.

Radix-8 Booth Encoded Modulo Multiplier

Abstract To design an efficient integrated circuit in terms of area, power and speed, has become a challenging task in modern VLSI design field. The encryption and decryption of PKC algorithms are performed by repeated modulo multiplications these multiplications differ from those encountered in signal processing and general computing applications. The Residue Number System (RNS) has emerged as a promising alternative number representation for the design of faster and low power multipliers owing to its merit to distribute a long integer multiplication into several shorter and independent modulo multiplications. The multipliers are the essential elements of the digital signal processing such as filtering, convolution, transformations and Inner products. RNS has also been successfully employed to design fault tolerant digital circuits. The modulo multiplier is usually the noncritical data path among all modulo multipliers in such high-DR RNS multiplier. This timing slack can be exploited to reduce the system area and power consumption without compromising the system performance. With this precept, a family of radix-8 Booth encoded modulo multipliers, with delay adaptable to the RNS multiplier delay, is proposed. In this paper, the radix-8 Booth encoded modulo multipliers whose delay can be tuned to match the RNS delay. In the proposed multiplier, the hard multiple is implemented using small word-length ripple carry adders (RCAs) operating in parallel. The carry-out bits from the adders are not propagated but treated as partial product bits to be accumulated in the CSA tree. The delay of the modulo multiplier can be directly controlled by the word-length of the RCAs to equal the delay of the critical modulo multiplier of the RNS. By combining radix-8 Booth encoded modulo multiplier, CSA and prefix architecture of multiplier, for high speed and low-power is achieved