545 research outputs found
Adaptive Non-Linear High Gain Observer Based Sensorless Speed Estimation of an Induction Motor
International audienc
Design of Sliding Mode PID Controller with Improved reaching laws for Nonlinear Systems
In this thesis, advanced design technique in sliding mode control (SMC) is
presented with focus on PID (Proportional-Integral-Derivative) type Sliding
surfaces based Sliding mode control with improved power rate exponential
reaching law for Non-linear systems using Modified Particle Swarm Optimization
(MPSO). To handle large non-linearities directly, sliding mode controller based
on PID-type sliding surface has been designed in this work, where Integral term
ensures fast finite convergence time. The controller parameter for various
modified structures can be estimated using Modified PSO, which is used as an
offline optimization technique. Various reaching law were implemented leading
to the proposed improved exponential power rate reaching law, which also
improves the finite convergence time. To implement the proposed algorithm,
nonlinear mathematical model has to be decrypted without linearizing, and used
for the simulation purposes. Their performance is studied using simulations to
prove the proposed behavior. The problem of chattering has been overcome by
using boundary method and also second order sliding mode method. PI-type
sliding surface based second order sliding mode controller with PD surface
based SMC compensation is also proposed and implemented. The proposed
algorithms have been analyzed using Lyapunov stability criteria. The robustness
of the method is provided using simulation results including disturbance and
10% variation in system parameters. Finally process control based hardware is
implemented (conical tank system)
Decentralised control for complex systems - An invited survey
© 2014 Inderscience Enterprises Ltd. With the advancement of science and technology, practical systems are becoming more complex. Decentralised control has been recognised as a practical, feasible and powerful tool for application to large scale interconnected systems. In this paper, past and recent results relating to decentralised control of complex large scale interconnected systems are reviewed. Decentralised control based on modern control approaches such as variable structure techniques, adaptive control and backstepping approaches are discussed. It is well known that system structure can be employed to reduce conservatism in the control design and decentralised control for interconnected systems with similar and symmetric structure is explored. Decentralised control of singular large scale systems is also reviewed in this paper
Robust and Decentralized Control of Web Winding Systems
This research addresses the velocity and tension regulation problems in web handling, including those found in the single element of an accumulator and those in the large-scale system settings. A continuous web winding system is a complex large-scale interconnected dynamics system with numerous tension zones to transport the web while processing it. A major challenge in controlling such systems is the unexpected disturbances that propagate through the system and affect both tension and velocity loops along the way. To solve this problem, a unique active disturbance rejection control (ADRC) strategy is proposed. Simulation results show remarkable disturbance rejection capability of the proposed control scheme in coping with large dynamic variations commonly seen in web winding systems. Another complication in web winding system stems from its large-scale and interconnected dynamics which makes control design difficult. This motivates the research in formulating a novel robust decentralized control strategy. The key idea in the proposed approach is that nonlinearities and interactions between adjunct subsystems are regarded as perturbations, to be estimated by an augmented state observer and rejected in the control loop, therefore making the local control design extremely simple. The proposed decentralized control strategy was implemented on a 3-tension-zone web winding processing line. Simulation results show that the proposed control method leads to much better tension and velocity regulation quality than the existing controller common in industry. Finally, this research tackles the challenging problem of stability analysis. Although ADRC has demonstrated the validity and advantage in many applications, the rigorous stability study has not been fully addressed previously. To this end, stability characterization of ADRC is carried out in this work. The closed-loop system is first reformulated, resulting in a form that allows the application of the well established singular perturbation method. Based on the decom
Robust and Decentralized Control of Web Winding Systems
This research addresses the velocity and tension regulation problems in web handling, including those found in the single element of an accumulator and those in the large-scale system settings. A continuous web winding system is a complex large-scale interconnected dynamics system with numerous tension zones to transport the web while processing it. A major challenge in controlling such systems is the unexpected disturbances that propagate through the system and affect both tension and velocity loops along the way. To solve this problem, a unique active disturbance rejection control (ADRC) strategy is proposed. Simulation results show remarkable disturbance rejection capability of the proposed control scheme in coping with large dynamic variations commonly seen in web winding systems. Another complication in web winding system stems from its large-scale and interconnected dynamics which makes control design difficult. This motivates the research in formulating a novel robust decentralized control strategy. The key idea in the proposed approach is that nonlinearities and interactions between adjunct subsystems are regarded as perturbations, to be estimated by an augmented state observer and rejected in the control loop, therefore making the local control design extremely simple. The proposed decentralized control strategy was implemented on a 3-tension-zone web winding processing line. Simulation results show that the proposed control method leads to much better tension and velocity regulation quality than the existing controller common in industry. Finally, this research tackles the challenging problem of stability analysis. Although ADRC has demonstrated the validity and advantage in many applications, the rigorous stability study has not been fully addressed previously. To this end, stability characterization of ADRC is carried out in this work. The closed-loop system is first reformulated, resulting in a form that allows the application of the well established singular perturbation method. Based on the decom
Output feedback control and robustness in the gap metric
Zusammenfassung
Mueller, Markus:
Output feedback control and robustness in the gap metric
Ilmenau : Univ.-Verl. Ilmenau, 2009. - 254 S.
ISBN 978-3-939473-60-2
Die vorgelegte Arbeit behandelt den Entwurf und die Robustheit von drei
verschiedenen Regelstrategien für lineare Differentialgleichungssysteme mit
mehrdimensionalen Ein- und Ausgangssignalen (MIMO): Stabilisierung durch
Ausgangs-Ableitungs-Rückführung, Lambda-tracking und Funnel-Regelung.
Damit diese Regler bei der Anwendung auf ein lineares System die gewünschten
Stabilisierung/Regelung erbringen, ist eine explizite Kenntnis der
Systemmatrizen nicht notwendig. Es müssen nur strukturelle Eigenschaften des
Systems bekannt sein: der Relativgrad, dass das System minimalphasig ist, und
dass die sogenannte "high-frequency gain" Matrix positiv definit ist. Diese
stukturellen Eigenschaften werden für MIMO-Systeme in den ersten Kapiteln der
Arbeit ausführlich behandelt. Für MIMO-Systeme mit nicht striktem Relativgrad
wird eine Normalform hergeleitet, die die gleichen Eigenschaften wie die
bekannte Normalform für SISO-Systeme oder MIMO-Systeme mit striktem Relativgrad
aufweist.
Die Normalform sowie Minimalphasigkeit und Positivität der "high-frequency
gain" Matrix bilden die Grundlage dafür, dass die oben genannten
Regelstrategien Systeme mit diesen Eigenschaften im jeweiligen Sinn
stabilisieren.
Robustheit bzw. robuste Stabilisierung beschreibt folgendes Prinzip: falls
ein geschlossener Kreis aus einem linearen System und einem Regler in gewissem
Sinne stabil ist und die Gap-Metrik (der Abstand) zwischen dem im geschlossenen
Kreis betrachteten System und einem anderen "neuen" System hinreichend klein
ist, so ist der geschlossene Kreis aus dem "neuen" System und dem gleichen
Regler wieder stabil. Die gleiche Aussage stimmt auch für den Fall, dass man
den Regler und nicht das System austauscht.
Für Ausgangs-Ableitungs-Rückführung wird gezeigt, dass, falls diese ein System
stabilisiert, die auftretenden Ableitungen des Ausgangs durch
Euler-Approximationen der Ableitungen ersetzt werden können, falls diese
hinreichend genau sind.
Für Lambda-tracking und Funnel-Regelung wird gezeigt, dass beide Regler auch
für die Stabilisierung linearer Systeme verwendet werden können, die einen
geringen Abstand zu einem System haben, dass die o.g. Voraussetzungen erfüllt,
selbst diese Voraussetzungen aber nicht erfüllen.Abstract:
This dissertation considers the design and robustness analysis of three different control strategies for linear systems of differential equations with multidimensional input and output signals (MIMO): high-gain output derivative feedback control, lambda-tracking and funnel control. To apply these control strategies to linear systems and achieve the desired control objectives (stabilization or tracking), the explicit system's data needs not to be known, but certain structural properties of the systems are required. The system's relative degree must be known, the system must be minimum phase and the so-called "high-frequency gain" matrix must be positive definite.
These properties are considered in detail for linear MIMO-systems with non-strict relative degree. A normal form is developed which has the same properties as the well-known normal form for SISO-systems or MIMO-systems with strict relative degree.
Normal form, minimum phase property and positivity of the high-frequency gain matrix are the crucial assumptions for the application of the control strategies mentioned above. It is shown that each controller achieves certain control objectives when applied to any system which satisfies these assumptions.
The result on robustness and robust stability are as follows: if a closed-loop system represented by the application of a controller to a linear plant is stable (in some sense), and the gap metric (i.e. the distance) between the stabilised system and a different "new" system is sufficiently small, then the closed-loop system represented by the application of the controller to the "new" system is again stable. This conclusion holds also true when changing the roles of system and controller.
For high-gain output derivative feedback control it is shown that the controller still stabilizes a system when the derivatives of the output are replaced by Euler approximations of the derivatives, provided the approximation is sufficiently precise.
For lambda-tracking and funnel control it is shown that both controllers may be applied to systems which are "close" (in terms of a small gap) to any system from the class of minimum phase systems, with relative degree one and positive definite high-frequency gain matrix, but not necessarily satisfy any of these assumptions
New Approaches in Automation and Robotics
The book New Approaches in Automation and Robotics offers in 22 chapters a collection of recent developments in automation, robotics as well as control theory. It is dedicated to researchers in science and industry, students, and practicing engineers, who wish to update and enhance their knowledge on modern methods and innovative applications. The authors and editor of this book wish to motivate people, especially under-graduate students, to get involved with the interesting field of robotics and mechatronics. We hope that the ideas and concepts presented in this book are useful for your own work and could contribute to problem solving in similar applications as well. It is clear, however, that the wide area of automation and robotics can only be highlighted at several spots but not completely covered by a single book
Optimal Control with Information Pattern Constraints
Despite the abundance of available literature that starts with the seminal paper of Wang and Davison almost forty years ago, when dealing with the problem of decentralized control for linear dynamical systems, one faces a surprising lack of
general design methods, implementable via computationally tractable algorithms.
This is mainly due to the fact that for decentralized control configurations, the classical control theoretical framework falls short in providing a systematic analysis
of the stabilization problem, let alone cope with additional optimality criteria.
Recently, a significant leap occurred through the theoretical machinery developed in Rotkowitz and Lall, IEEE-TAC, vol. 51, 2006, pp. 274-286 which unifies and consolidates many previous results, pinpoints certain tractable decentralized control structures, and outlines the most general known class of convex problems in
decentralized control. The decentralized setting is modeled via the structured sparsity constraints paradigm, which proves to be a simple and effective way to formalize many decentralized configurations where the controller feature a given sparsity pattern. Rotkowitz and Lall propose a computationally tractable algorithm for the design of H2 optimal, decentralized controllers for linear and time invariant systems, provided that the plant is strongly stabilizable. The method is built on the assumption that the sparsity constraints imposed on the controller satisfy a certain
condition (named quadratic invariance) with respect to the plant and that some decentralized, strongly stablizable, stabilizing controller is available beforehand.
For this class of decentralized feedback configurations modeled via sparsity constraints, so called quadratically invariant, we provided complete solutions to several open problems. Firstly, the strong stabilizability assumption was removed via
the so called coordinate free parametrization of all, sparsity constrained controllers.
Next we have addressed the unsolved problem of stabilizability/stabilization via sparse controllers, using a particular form of the celebrated Youla parametrization.
Finally, a new result related to the optimal disturbance attenuation problem in the presence of stable plant perturbations is presented. This result is also valid for quadratically invariant, decentralized feedback configurations. Each result provides a computational, numerically tractable algorithm which is meaningful in the
synthesis of sparsity constrained optimal controllers
A Hybrid Controller for Stability Robustness, Performance Robustness, and Disturbance Attenuation of a Maglev System
Devices using magnetic levitation (maglev) offer the potential for friction-free, high-speed, and high-precision operation. Applications include frictionless bearings, high-speed ground transportation systems, wafer distribution systems, high-precision positioning stages, and vibration isolation tables. Maglev systems rely on feedback controllers to maintain stable levitation. Designing such feedback controllers is challenging since mathematically the electromagnetic force is nonlinear and there is no local minimum point on the levitating force function. As a result, maglev systems are open-loop unstable. Additionally, maglev systems experience disturbances and system parameter variations (uncertainties) during operation. A successful controller design for maglev system guarantees stability during levitating despite system nonlinearity, and desirable system performance despite disturbances and system uncertainties. This research investigates five controllers that can achieve stable levitation: PD, PID, lead, model reference control, and LQR/LQG. It proposes an acceleration feedback controller (AFC) design that attenuates disturbance on a maglev system with a PD controller. This research proposes three robust controllers, QFT, Hinf , and QFT/Hinf , followed by a novel AFC-enhanced QFT/Hinf (AQH) controller. The AQH controller allows system robustness and disturbance attenuation to be achieved in one controller design. The controller designs are validated through simulations and experiments. In this research, the disturbances are represented by force disturbances on the levitated object, and the system uncertainties are represented by parameter variations. The experiments are conducted on a 1 DOF maglev testbed, with system performance including stability, disturbance rejection, and robustness being evaluated. Experiments show that the tested controllers can maintain stable levitation. Disturbance attenuation is achieved with the AFC. The robust controllers, QFT, Hinf , QFT/ Hinf, and AQH successfully guarantee system robustness. In addition, AQH controller provides the maglev system with a disturbance attenuation feature. The contributions of this research are the design and implementation of the acceleration feedback controller, the QFT/ Hinf , and the AQH controller. Disturbance attenuation and system robustness are achieved with these controllers. The controllers developed in this research are applicable to similar maglev systems
- …