Array-OL Revisited, Multidimensional Intensive Signal Processing Specification

This paper presents the Array-OL specification language. It is a high-level visual language dedicated to multidimensional intensive signal processing applications. It allows to specify both the task parallelism and the data parallelism of these applications on focusing on their complex multidimensional data access patterns. This presentation includes several extensions and tools developed around Array-OL during the last few years and discusses the mapping of an Array-OL specification onto a distributed heterogeneous hardware architecture

A Methodology for Modelling and Simulation of Dynamic and Partially Reconfigurable Systems

Non

System Level Performance Evaluation of Distributed Embedded Systems

In order to evaluate the feasibility of the distributed embedded systems in different application domains at an early phase, the System Level Performance Evaluation (SLPE) must provide reliable estimates of the nonfunctional properties of the system such as end-to-end delays and packet losses rate. The values of these non-functional properties depend not only on the application layer of the OSI model but also on the technologies residing at the MAC, transport and Physical layers. Therefore, the system level performance evaluation methodology must provide functionally accurate models of the protocols and technologies operating at these layers. After conducting a state of the art survey, it was found that the existing approaches for SLPE are either specialized for a particular domain of systems or apply a particular model of computation (MOC) for modeling the communication and synchronization between the different components of a distributed application. Therefore, these approaches abstract the functionalities of the data-link, Transport and MAC layers by the highly abstract message passing methods employed by the different models of computation. On the other hand, network simulators such as OMNeT++, ns-2 and Opnet do not provide the models for platform components of devices such as processors and memories and totally abstract the application processing by delays obtained via traffic generators. Therefore the system designer is not able to determine the potential impact of an application in terms of utilization of the platform used by the device. Hence, for a system level performance evaluation approach to estimate both the platform utilization and the non-functional properties which are a consequence of the lower layers of OSI models (such as end-to-end delays), it must provide the tools for automatic workload extraction of application workload models at various levels of refinement and functionally correct models of lower layers of OSI model (Transport MAC and Physical layers). Since ABSOLUT is not restricted to a particular domain and also does not depend on any MOC, therefore it was selected for the extension to a system level performance evaluation approach for distributed embedded systems. The models of data-link and Transport layer protocols and automatic workload generation of system calls was not available in ABSOLUT performance evaluation methodology. The, thesis describes the design and modelling of these OSI model layers and automatic workload generation tool for system calls. The tools and models integrated to ABSOLUT methodology were used in a number of case studies. The accuracy of the protocols was compared to network simulators and real systems. The results were 88% accurate for user space code of the application layer and provide an improvement of over 50% as compared to manual models for external libraries and system calls. The ABSOLUT physical layer models were found to be 99.8% accurate when compared to analytical models. The MAC and transport layer models were found to be 70-80% accurate when compared with the same scenarios simulated by ns-2 and OMNeT++ simulators. The bit error rates, frame error probability and packet loss rates show close correlation with the analytical methods .i.e., over 99%, 92% and 80% respectively. Therefore the results of ABSOLUT framework for application layer outperform the results of performance evaluation approaches which employ virtual systems and at the same time provide as accurate estimates of the end-to-end delays and packet loss rate as network simulators. The results of the network simulators also vary in absolute values but they follow the same trend. Therefore, the extensions made to ABSOLUT allow the system designer to identify the potential bottlenecks in the system at different OSI model layers and evaluate the non-functional properties with a high level of accuracy. Also, if the system designer wants to focus entirely on the application layer, different models of computations can be easily instantiated on top of extended ABSOLUT framework to achieve higher simulation speeds as described in the thesis

Formal QoS Validation Approach on a Real-Time MAC Protocol for Wireless Sensor Networks

Several wireless sensor network applications are currently popping up, in various domains. Their goal is often to monitor a geographic area. When a sensor detects a monitored event, it informs a sink node using alarm messages. The area surveillance application needs to react to such an event with a finite, bounded and known delay: these are real-time constraints. The network being linear, routing becomes unnecessary. This work proposes a new real-time MAC protocol with realistic assumptions on sensor networks. We present a formal validation of this protocol, and explicit the worst case times for the services offered by the protocol (initialization and alarm transmission using different modes)

Interactive Model-Based Compilation: A Modeller-Driven Development Approach

There is a growing tendency for using domain-specific languages, which help domain experts to stay focussed on abstract problem solutions. It is important to carefully design these languages and tools, which fundamentally perform model-to-model transformations. The quality of both usually decides the effectiveness of the subsequent development and therefore the quality of the final applications. However, as the complexity and safety requirements of modern systems grow, it becomes increasingly burdensome to create highly customized languages and difficult to provide reasonable overviews within these tools. This thesis introduces a new interactive model-based compilation methodology. Compilations for arbitrary model-to-model transformations are themselves described as models. They can be instantiated for particular inputs, e. g. a program, to create concrete compilation runs, which return the result of that compilation. The compilation instance is interactively observable. Intermediate results serve as new inputs and as documentation. They can be used to create highly customized views and facilitate understandability. This methodology guides modellers from the start of the compilation to the final result so that they can interactively refine their models. The methodology has been implemented and validated as the KIELER Compiler (KiCo) and is available as part of the KIELER open-source project. It is used to implement the current reference compiler for the SCCharts language, a statecharts dialect designed for specifying safety-critical reactive systems based on a synchronous model of computation. The interactive model-based compilation approach was key to the rapid prototyping of three different compilation strategies, as well as new language extensions, variations and closely related languages. The results are verified with benchmarks, which are again modelled using the same approach and technology. The usability of the SCCharts language and the KiCo tooling is documented with long-term surveys and real-life industrial, academic and teaching examples

Méthodes et outils de la conception amont pour les systèmes et les micro-systèmes

Ce travail de thèse porte sur l'élaboration de modèles de haut-niveau de systèmes pluridisciplinaires à base d'électronique. L'objectif est de réaliser des prototypes virtuels de ces systèmes et de vérifier formellement leur comportement dès les premières étapes du cycle de conception. Grâce à une approche descendante et au formalisme HiLeS, nous réalisons des représentations hiérarchiques qui associent des réseaux de Petri à un ensemble de blocs et de canaux interagissant mutuellement. Nous avons développé l'outil HiLeS Designer pour rendre utilisable le formalisme avec plusieurs améliorations opérationnelles telles que le couplage avec un outil d'analyse de réseaux de Petri (TINA) et la compatibilité avec VHDL-AMS. Nous proposons donc, une plate-forme de conception amont autour de l'outil HiLeS Designer avec des passerelles vers TINA et VHDL-AMS. L'utilisation de cette plate-forme nous à permis d'identifier plusieurs perspectives de développement, notamment vers la conduite de projet. ABSTRACT : This work concerns the development of high-level models of multi-disciplinary systems based on electronics. The objective is to construct virtual prototypes of those systems and to verify their behavior since the early stages of the design process. Using a top-down approach and the HiLeS formalism we obtain hierarchical models that associate Petri nets and a group of blocks and channels interacting mutually. We developed HiLeS Designer, a software tool that implements the formalism with several complementary improvements such as an interface to a Petri nets analysis tool (TINA) and compatibility with VHDL-AMS. These two aspects are the base of our formal verification and virtual prototyping approach. We propose a high-level systems design platform that integrates HiLeS Designer, TINA and VHDL-AMS. Using this platform on two case studies allowed us to identify possible improvements to our project and prospective evolutions

Performance modelling for system-level design

xii+208hlm.;24c

Assessing and improving the quality of model transformations

Software is pervading our society more and more and is becoming increasingly complex. At the same time, software quality demands remain at the same, high level. Model-driven engineering (MDE) is a software engineering paradigm that aims at dealing with this increasing software complexity and improving productivity and quality. Models play a pivotal role in MDE. The purpose of using models is to raise the level of abstraction at which software is developed to a level where concepts of the domain in which the software has to be applied, i.e., the target domain, can be expressed e??ectively. For that purpose, domain-speci??c languages (DSLs) are employed. A DSL is a language with a narrow focus, i.e., it is aimed at providing abstractions speci??c to the target domain. This makes that the application of models developed using DSLs is typically restricted to describing concepts existing in that target domain. Reuse of models such that they can be applied for di??erent purposes, e.g., analysis and code generation, is one of the challenges that should be solved by applying MDE. Therefore, model transformations are typically applied to transform domain-speci??c models to other (equivalent) models suitable for di??erent purposes. A model transformation is a mapping from a set of source models to a set of target models de??ned as a set of transformation rules. MDE is gradually being adopted by industry. Since MDE is becoming more and more important, model transformations are becoming more prominent as well. Model transformations are in many ways similar to traditional software artifacts. Therefore, they need to adhere to similar quality standards as well. The central research question discoursed in this thesis is therefore as follows. How can the quality of model transformations be assessed and improved, in particular with respect to development and maintenance? Recall that model transformations facilitate reuse of models in a software development process. We have developed a model transformation that enables reuse of analysis models for code generation. The semantic domains of the source and target language of this model transformation are so far apart that straightforward transformation is impossible, i.e., a semantic gap has to be bridged. To deal with model transformations that have to bridge a semantic gap, the semantics of the source and target language as well as possible additional requirements should be well understood. When bridging a semantic gap is not straightforward, we recommend to address a simpli??ed version of the source metamodel ??rst. Finally, the requirements on the transformation may, if possible, be relaxed to enable automated model transformation. Model transformations that need to transform between models in di??erent semantic domains are expected to be more complex than those that merely transform syntax. The complexity of a model transformation has consequences for its quality. Quality, in general, is a subjective concept. Therefore, quality can be de??ned in di??erent ways. We de??ned it in the context of model transformation. A model transformation can either be considered as a transformation de??nition or as the process of transforming a source model to a target model. Accordingly, model transformation quality can be de??ned in two di??erent ways. The quality of the de??nition is referred to as its internal quality. The quality of the process of transforming a source model to a target model is referred to as its external quality. There are also two ways to assess the quality of a model transformation (both internal and external). It can be assessed directly, i.e., by performing measurements on the transformation de??nition, or indirectly, i.e., by performing measurements in the environment of the model transformation. We mainly focused on direct assessment of internal quality. However, we also addressed external quality and indirect assessment. Given this de??nition of quality in the context of model transformations, techniques can be developed to assess it. Software metrics have been proposed for measuring various kinds of software artifacts. However, hardly any research has been performed on applying metrics for assessing the quality of model transformations. For four model transformation formalisms with di??fferent characteristics, viz., for ASF+SDF, ATL, Xtend, and QVTO, we de??ned sets of metrics for measuring model transformations developed with these formalisms. While these metric sets can be used to indicate bad smells in the code of model transformations, they cannot be used for assessing quality yet. A relation has to be established between the metric sets and attributes of model transformation quality. For two of the aforementioned metric sets, viz., the ones for ASF+SDF and for ATL, we conducted an empirical study aiming at establishing such a relation. From these empirical studies we learned what metrics serve as predictors for di??erent quality attributes of model transformations. Metrics can be used to quickly acquire insights into the characteristics of a model transformation. These insights enable increasing the overall quality of model transformations and thereby also their maintainability. To support maintenance, and also development in a traditional software engineering process, visualization techniques are often employed. For model transformations this appears as a feasible approach as well. Currently, however, there are few visualization techniques available tailored towards analyzing model transformations. One of the most time-consuming processes during software maintenance is acquiring understanding of the software. We expect that this holds for model transformations as well. Therefore, we presented two complementary visualization techniques for facilitating model transformation comprehension. The ??rst-technique is aimed at visualizing the dependencies between the components of a model transformation. The second technique is aimed at analyzing the coverage of the source and target metamodels by a model transformation. The development of the metric sets, and in particular the empirical studies, have led to insights considering the development of model transformations. Also, the proposed visualization techniques are aimed at facilitating the development of model transformations. We applied the insights acquired from the development of the metric sets as well as the visualization techniques in the development of a chain of model transformations that bridges a number of semantic gaps. We chose to solve this transformational problem not with one model transformation, but with a number of smaller model transformations. This should lead to smaller transformations, which are more understandable. The language on which the model transformations are de??ned, was subject to evolution. In particular the coverage visualization proved to be bene??cial for the co-evolution of the model transformations. Summarizing, we de??ned quality in the context of model transformations and addressed the necessity for a methodology to assess it. Therefore, we de??ned metric sets and performed empirical studies to validate whether they serve as predictors for model transformation quality. We also proposed a number of visualizations to increase model transformation comprehension. The acquired insights from developing the metric sets and the empirical studies, as well as the visualization tools, proved to be bene??cial for developing model transformations

Génération de modèles de haut niveau enrichis pour les systèmes hétérogènes et multiphysiques

Systems on chip are more and more complex as they now embed not only digital and analog parts, butalso sensors and actuators. SystemC and its extension SystemC AMS allow the high level modeling ofsuch systems. These tools are efficient for feasibility study, architectural exploration and globalverification of heterogeneous and multiphysics systems. At low level of abstraction, the simulationdurations are too important. Moreover, synchronization problems appear when cosimulations areperformed. It is possible to abstract the low level models that are developed by the specialists of thedifferent domains to create high level models that can be simulated faster using SystemC/SystemCAMS. The models of computation and the modeling styles have been studied. A relation is shownbetween the modeling style, the model size and the simulation speed. A method that generatesautomatically the high level model of an analog linear circuit from its low level representation isproposed. Then, it is shown how to include in the high level model some information allowing thepower consumption estimation. After that, the multiphysics systems modeling is studied. Twomethods are discussed: firstly, the one that uses the electrical equivalent circuit, then the one based onthe bond graph approach. It is shown how to generate a bond graph equivalent model from a low levelrepresentation. Finally, the modeling of a wind turbine system is discussed in order to illustrate thedifferent concepts presented in this thesis.Les systèmes sur puce sont de plus en plus complexes : ils intègrent des parties numériques, desparties analogiques et des capteurs ou actionneurs. SystemC et son extension SystemC AMSpermettent aujourd’hui de modéliser à haut niveau d’abstraction de tels systèmes. Ces outilsconstituent de véritables atouts dans une optique d’étude de faisabilité, d’exploration architecturale etde vérification du fonctionnement global des systèmes complexes hétérogènes et multiphysiques. Eneffet, les durées de simulation deviennent trop importantes pour envisager les simulations globales àbas niveau d’abstraction. De plus, les simulations basées sur l’utilisation conjointe de différents outilsprovoquent des problèmes de synchronisation. Les modèles de bas niveau, une fois crées par lesspécialistes des différents domaines peuvent toutefois être abstraits afin de générer des modèles dehaut niveau simulables sous SystemC/SystemC AMS en des temps de simulation réduits. Une analysedes modèles de calcul et des styles de modélisation possibles est d’abord présentée afin d’établir unlien avec les durées de simulation, ceci pour proposer un style de modélisation en fonction du niveaud’abstraction souhaité et de l’ampleur de la simulation à effectuer. Dans le cas des circuits analogiqueslinéaires, une méthode permettant de générer automatiquement des modèles de haut niveaud’abstraction à partir de modèles de bas niveau a été proposée. Afin d’évaluer très tôt dans le flot deconception la consommation d’un système, un moyen d’enrichir les modèles de haut niveaupréalablement générés est présenté. L’attention a ensuite été portée sur la modélisation à haut niveaudes systèmes multiphysiques. Deux méthodes y sont discutées : la méthode consistant à utiliser lecircuit équivalent électrique puis la méthode basée sur les bond graphs. En particulier, nous proposonsune méthode permettant de générer un modèle équivalent au bond graph à partir d’un modèle de basniveau. Enfin, la modélisation d’un système éolien est étudiée afin d’illustrer les différents conceptsprésentés dans cette thèse