TractorEYE: Vision-based Real-time Detection for Autonomous Vehicles in Agriculture

Agricultural vehicles such as tractors and harvesters have for decades been able to navigate automatically and more efficiently using commercially available products such as auto-steering and tractor-guidance systems. However, a human operator is still required inside the vehicle to ensure the safety of vehicle and especially surroundings such as humans and animals. To get fully autonomous vehicles certified for farming, computer vision algorithms and sensor technologies must detect obstacles with equivalent or better than human-level performance. Furthermore, detections must run in real-time to allow vehicles to actuate and avoid collision.This thesis proposes a detection system (TractorEYE), a dataset (FieldSAFE), and procedures to fuse information from multiple sensor technologies to improve detection of obstacles and to generate a map. TractorEYE is a multi-sensor detection system for autonomous vehicles in agriculture. The multi-sensor system consists of three hardware synchronized and registered sensors (stereo camera, thermal camera and multi-beam lidar) mounted on/in a ruggedized and water-resistant casing. Algorithms have been developed to run a total of six detection algorithms (four for rgb camera, one for thermal camera and one for a Multi-beam lidar) and fuse detection information in a common format using either 3D positions or Inverse Sensor Models. A GPU powered computational platform is able to run detection algorithms online. For the rgb camera, a deep learning algorithm is proposed DeepAnomaly to perform real-time anomaly detection of distant, heavy occluded and unknown obstacles in agriculture. DeepAnomaly is -- compared to a state-of-the-art object detector Faster R-CNN -- for an agricultural use-case able to detect humans better and at longer ranges (45-90m) using a smaller memory footprint and 7.3-times faster processing. Low memory footprint and fast processing makes DeepAnomaly suitable for real-time applications running on an embedded GPU. FieldSAFE is a multi-modal dataset for detection of static and moving obstacles in agriculture. The dataset includes synchronized recordings from a rgb camera, stereo camera, thermal camera, 360-degree camera, lidar and radar. Precise localization and pose is provided using IMU and GPS. Ground truth of static and moving obstacles (humans, mannequin dolls, barrels, buildings, vehicles, and vegetation) are available as an annotated orthophoto and GPS coordinates for moving obstacles. Detection information from multiple detection algorithms and sensors are fused into a map using Inverse Sensor Models and occupancy grid maps. This thesis presented many scientific contribution and state-of-the-art within perception for autonomous tractors; this includes a dataset, sensor platform, detection algorithms and procedures to perform multi-sensor fusion. Furthermore, important engineering contributions to autonomous farming vehicles are presented such as easily applicable, open-source software packages and algorithms that have been demonstrated in an end-to-end real-time detection system. The contributions of this thesis have demonstrated, addressed and solved critical issues to utilize camera-based perception systems that are essential to make autonomous vehicles in agriculture a reality

Cybergis-enabled remote sensing data analytics for deep learning of landscape patterns and dynamics

Mapping landscape patterns and dynamics is essential to various scientific domains and many practical applications. The availability of large-scale and high-resolution light detection and ranging (LiDAR) remote sensing data provides tremendous opportunities to unveil complex landscape patterns and better understand landscape dynamics from a 3D perspective. LiDAR data have been applied to diverse remote sensing applications where large-scale landscape mapping is among the most important topics. While researchers have used LiDAR for understanding landscape patterns and dynamics in many fields, to fully reap the benefits and potential of LiDAR is increasingly dependent on advanced cyberGIS and deep learning approaches. In this context, the central goal of this dissertation is to develop a suite of innovative cyberGIS-enabled deep-learning frameworks for combining LiDAR and optical remote sensing data to analyze landscape patterns and dynamics with four interrelated studies. The first study demonstrates a high-accuracy land-cover mapping method by integrating 3D information from LiDAR with multi-temporal remote sensing data using a 3D deep-learning model. The second study combines a point-based classification algorithm and an object-oriented change detection strategy for urban building change detection using deep learning. The third study develops a deep learning model for accurate hydrological streamline detection using LiDAR, which has paved a new way of harnessing LiDAR data to map landscape patterns and dynamics at unprecedented computational and spatiotemporal scales. The fourth study resolves computational challenges in handling remote sensing big data and deep learning of landscape feature extraction and classification through a cutting-edge cyberGIS approach

Weakly supervised deep learning method for vulnerable road user detection in FMCW radar

Millimeter-wave radar is currently the most effective automotive sensor capable of all-weather perception. In order to detect Vulnerable Road Users (VRUs) in cluttered radar data, it is necessary to model the time-frequency signal patterns of human motion, i.e. the micro-Doppler signature. In this paper we propose a spatio-temporal Convolutional Neural Network (CNN) capable of detecting VRUs in cluttered radar data. The main contribution is a weakly supervised training method which uses abundant, automatically generated labels from camera and lidar for training the model. The input to the network is a tensor of temporally concatenated range-azimuth-Doppler arrays, while the ground truth is an occupancy grid formed by objects detected jointly in-camera images and lidar. Lidar provides accurate ranging ground truth, while camera information helps distinguish between VRUs and background. Experimental evaluation shows that the CNN model has superior detection performance compared to classical techniques. Moreover, the model trained with imperfect, weak supervision labels outperforms the one trained with a limited number of perfect, hand-annotated labels. Finally, the proposed method has excellent scalability due to the low cost of automatic annotation

Learning Birds-Eye View Representations for Autonomous Driving

Over the past few years, progress towards the ambitious goal of widespread fully-autonomous vehicles on our roads has accelerated dramatically. This progress has been spurred largely by the success of highly accurate LiDAR sensors, as well the use of detailed high-resolution maps, which together allow a vehicle to navigate its surroundings effectively. Often, however, one or both of these resources may be unavailable, whether due to cost, sensor failure, or the need to operate in an unmapped environment. The aim of this thesis is therefore to demonstrate that it is possible to build detailed three-dimensional representations of traffic scenes using only 2D monocular camera images as input. Such an approach faces many challenges: most notably that 2D images do not provide explicit 3D structure. We overcome this limitation by applying a combination of deep learning and geometry to transform image-based features into an orthographic birds-eye view representation of the scene, allowing algorithms to reason in a metric, 3D space. This approach is applied to solving two challenging perception tasks central to autonomous driving. The first part of this thesis addresses the problem of monocular 3D object detection, which involves determining the size and location of all objects in the scene. Our solution was based on a novel convolutional network architecture that processed features in both the image and birds-eye view perspective. Results on the KITTI dataset showed that this network outperformed existing works at the time, and although more recent works have improved on these results, we conducted extensive analysis to find that our solution performed well in many difficult edge-case scenarios such as objects close to or distant from the camera. In the second part of the thesis, we consider the related problem of semantic map prediction. This consists of estimating a birds-eye view map of the world visible from a given camera, encoding both static elements of the scene such as pavement and road layout, as well as dynamic objects such as vehicles and pedestrians. This was accomplished using a second network that built on the experience from the previous work and achieved convincing performance on two real-world driving datasets. By formulating the maps as an occupancy grid map (a widely used representation from robotics), we were able to demonstrate how predictions could be accumulated across multiple frames, and that doing so further improved the robustness of maps produced by our system.Toyota Motors Europ

Frequency Modulated Continuous Waveform Radar for Collision Prevention in Large Vehicles

The drivers of large vehicles can have very limited visibility, which contributes to poor situation awareness and an increased risk of collision with other agents. This thesis is focused on the development of reliable sensing for this close proximity problem in large vehicles operating in harsh environmental conditions. It emphasises the use of in-depth knowledge of a sensor’s physics and performance characteristics to develop effective mathematical models for use in different mapping algorithms. An analysis of the close proximity problem and the demands it poses on sensing technologies is presented. This guides the design and modelling process for a frequency modulated continuous waveform (FMCW) radar sensor for use in solving the close proximity problem. Radar offers better all-weather performance than other sensing modalities, but its measurement structure is more complex and often degraded by noise and clutter. The commonly used constant false alarm rate (CFAR) threshold approach performs poorly in applications with frequent extended targets and a short measurement vector, as is the case here. Therefore, a static detection threshold is calculated using measurements of clutter made using the radar, allowing clutter measurements to be filtered out in known environments. The detection threshold is used to develop a heuristic sensor model for occupancy grid mapping. This results in a more reliable representation of the environment than is achieved using the detection threshold alone. A Gaussian mixture extended Kalman probability hypothesis density filter (GM-EK-PHD) is implemented to allow mapping in dynamic environments using the FMCW radar. These methods are used to produce maps of the environment that can be displayed to the driver of a large vehicle to better avoid collisions. The concepts developed in this thesis are validated using simulated and real data from a low-cost 24GHz FMCW radar developed at the Australian Centre for Field Robotics at the University of Sydney

Development of new intelligent autonomous robotic assistant for hospitals

Continuous technological development in modern societies has increased the quality of life and average life-span of people. This imposes an extra burden on the current healthcare infrastructure, which also creates the opportunity for developing new, autonomous, assistive robots to help alleviate this extra workload. The research question explored the extent to which a prototypical robotic platform can be created and how it may be implemented in a hospital environment with the aim to assist the hospital staff with daily tasks, such as guiding patients and visitors, following patients to ensure safety, and making deliveries to and from rooms and workstations. In terms of major contributions, this thesis outlines five domains of the development of an actual robotic assistant prototype. Firstly, a comprehensive schematic design is presented in which mechanical, electrical, motor control and kinematics solutions have been examined in detail. Next, a new method has been proposed for assessing the intrinsic properties of different flooring-types using machine learning to classify mechanical vibrations. Thirdly, the technical challenge of enabling the robot to simultaneously map and localise itself in a dynamic environment has been addressed, whereby leg detection is introduced to ensure that, whilst mapping, the robot is able to distinguish between people and the background. The fourth contribution is geometric collision prediction into stabilised dynamic navigation methods, thus optimising the navigation ability to update real-time path planning in a dynamic environment. Lastly, the problem of detecting gaze at long distances has been addressed by means of a new eye-tracking hardware solution which combines infra-red eye tracking and depth sensing. The research serves both to provide a template for the development of comprehensive mobile assistive-robot solutions, and to address some of the inherent challenges currently present in introducing autonomous assistive robots in hospital environments.Open Acces

Traffic scene awareness for intelligent vehicles using ConvNets and stereo vision

In this paper, we propose an efficient approach to perform recognition and 3D localization of dynamic objects on images from a stereo camera, with the goal of gaining insight into traffic scenes in urban and road environments. We rely on a deep learning framework able to simultaneously identify a broad range of entities, such as vehicles, pedestrians or cyclists, with a frame rate compatible with the strict requirements of onboard automotive applications. Stereo information is later introduced to enrich the knowledge about the objects with geometrical information. The results demonstrate the capabilities of the perception system for a wide variety of situations, thus providing valuable information for a higher-level understanding of the traffic situation

Lidar-based Obstacle Detection and Recognition for Autonomous Agricultural Vehicles

Today, agricultural vehicles are available that can drive autonomously and follow exact route plans more precisely than human operators. Combined with advancements in precision agriculture, autonomous agricultural robots can reduce manual labor, improve workflow, and optimize yield. However, as of today, human operators are still required for monitoring the environment and acting upon potential obstacles in front of the vehicle. To eliminate this need, safety must be ensured by accurate and reliable obstacle detection and avoidance systems.In this thesis, lidar-based obstacle detection and recognition in agricultural environments has been investigated. A rotating multi-beam lidar generating 3D point clouds was used for point-wise classification of agricultural scenes, while multi-modal fusion with cameras and radar was used to increase performance and robustness. Two research perception platforms were presented and used for data acquisition. The proposed methods were all evaluated on recorded datasets that represented a wide range of realistic agricultural environments and included both static and dynamic obstacles.For 3D point cloud classification, two methods were proposed for handling density variations during feature extraction. One method outperformed a frequently used generic 3D feature descriptor, whereas the other method showed promising preliminary results using deep learning on 2D range images. For multi-modal fusion, four methods were proposed for combining lidar with color camera, thermal camera, and radar. Gradual improvements in classification accuracy were seen, as spatial, temporal, and multi-modal relationships were introduced in the models. Finally, occupancy grid mapping was used to fuse and map detections globally, and runtime obstacle detection was applied on mapped detections along the vehicle path, thus simulating an actual traversal.The proposed methods serve as a first step towards full autonomy for agricultural vehicles. The study has thus shown that recent advancements in autonomous driving can be transferred to the agricultural domain, when accurate distinctions are made between obstacles and processable vegetation. Future research in the domain has further been facilitated with the release of the multi-modal obstacle dataset, FieldSAFE