Self-adaptivity of applications on network on chip multiprocessors: the case of fault-tolerant Kahn process networks

Technology scaling accompanied with higher operating frequencies and the ability to integrate more functionality in the same chip has been the driving force behind delivering higher performance computing systems at lower costs. Embedded computing systems, which have been riding the same wave of success, have evolved into complex architectures encompassing a high number of cores interconnected by an on-chip network (usually identified as Multiprocessor System-on-Chip). However these trends are hindered by issues that arise as technology scaling continues towards deep submicron scales. Firstly, growing complexity of these systems and the variability introduced by process technologies make it ever harder to perform a thorough optimization of the system at design time. Secondly, designers are faced with a reliability wall that emerges as age-related degradation reduces the lifetime of transistors, and as the probability of defects escaping post-manufacturing testing is increased. In this thesis, we take on these challenges within the context of streaming applications running in network-on-chip based parallel (not necessarily homogeneous) systems-on-chip that adopt the no-remote memory access model. In particular, this thesis tackles two main problems: (1) fault-aware online task remapping, (2) application-level self-adaptation for quality management. For the former, by viewing fault tolerance as a self-adaptation aspect, we adopt a cross-layer approach that aims at graceful performance degradation by addressing permanent faults in processing elements mostly at system-level, in particular by exploiting redundancy available in multi-core platforms. We propose an optimal solution based on an integer linear programming formulation (suitable for design time adoption) as well as heuristic-based solutions to be used at run-time. We assess the impact of our approach on the lifetime reliability. We propose two recovery schemes based on a checkpoint-and-rollback and a rollforward technique. For the latter, we propose two variants of a monitor-controller- adapter loop that adapts application-level parameters to meet performance goals. We demonstrate not only that fault tolerance and self-adaptivity can be achieved in embedded platforms, but also that it can be done without incurring large overheads. In addressing these problems, we present techniques which have been realized (depending on their characteristics) in the form of a design tool, a run-time library or a hardware core to be added to the basic architecture

Framework for Simulation of Heterogeneous MpSoC for Design Space Exploration

Due to the ever-growing requirements in high performance data computation, multiprocessor systems have been proposed to solve the bottlenecks in uniprocessor systems. Developing efficient multiprocessor systems requires effective exploration of design choices like application scheduling, mapping, and architecture design. Also, fault tolerance in multiprocessors needs to be addressed. With the advent of nanometer-process technology for chip manufacturing, realization of multiprocessors on SoC (MpSoC) is an active field of research. Developing efficient low power, fault-tolerant task scheduling, and mapping techniques for MpSoCs require optimized algorithms that consider the various scenarios inherent in multiprocessor environments. Therefore there exists a need to develop a simulation framework to explore and evaluate new algorithms on multiprocessor systems. This work proposes a modular framework for the exploration and evaluation of various design algorithms for MpSoC system. This work also proposes new multiprocessor task scheduling and mapping algorithms for MpSoCs. These algorithms are evaluated using the developed simulation framework. The paper also proposes a dynamic fault-tolerant (FT) scheduling and mapping algorithm for robust application processing. The proposed algorithms consider optimizing the power as one of the design constraints. The framework for a heterogeneous multiprocessor simulation was developed using SystemC/C++ language. Various design variations were implemented and evaluated using standard task graphs. Performance evaluation metrics are evaluated and discussed for various design scenarios

A Survey and Comparative Study of Hard and Soft Real-time Dynamic Resource Allocation Strategies for Multi/Many-core Systems

Multi-/many-core systems are envisioned to satisfy the ever-increasing performance requirements of complex applications in various domains such as embedded and high-performance computing. Such systems need to cater to increasingly dynamic workloads, requiring efficient dynamic resource allocation strategies to satisfy hard or soft real-time constraints. This article provides an extensive survey of hard and soft real-time dynamic resource allocation strategies proposed since the mid-1990s and highlights the emerging trends for multi-/many-core systems. The survey covers a taxonomy of the resource allocation strategies and considers their various optimization objectives, which have been used to provide comprehensive comparison. The strategies employ various principles, such as market and biological concepts, to perform the optimizations. The trend followed by the resource allocation strategies, open research challenges, and likely emerging research directions have also been provided

High-level services for networks-on-chip

Future technology trends envision that next-generation Multiprocessors Systems-on- Chip (MPSoCs) will be composed of a combination of a large number of processing and storage elements interconnected by complex communication architectures. Communication and interconnection between these basic blocks play a role of crucial importance when the number of these elements increases. Enabling reliable communication channels between cores becomes therefore a challenge for system designers. Networks-on-Chip (NoCs) appeared as a strategy for connecting and managing the communication between several design elements and IP blocks, as required in complex Systems-on-Chip (SoCs). The topic can be considered as a multidisciplinary synthesis of multiprocessing, parallel computing, networking, and on- chip communication domains. Networks-on-Chip, in addition to standard communication services, can be employed for providing support for the implementation of system-level services. This dissertation will demonstrate how high-level services can be added to an MPSoC platform by embedding appropriate hardware/software support in the network interfaces (NIs) of the NoC. In this dissertation, the implementation of innovative modules acting in parallel with protocol translation and data transmission in NIs is proposed and evaluated. The modules can support the execution of the high-level services in the NoC at a relatively low cost in terms of area and energy consumption. Three types of services will be addressed and discussed: security, monitoring, and fault tolerance. With respect to the security aspect, this dissertation will discuss the implementation of an innovative data protection mechanism for detecting and preventing illegal accesses to protected memory blocks and/or memory mapped peripherals. The second aspect will be addressed by proposing the implementation of a monitoring system based on programmable multipurpose monitoring probes aimed at detecting NoC internal events and run-time characteristics. As last topic, new architectural solutions for the design of fault tolerant network interfaces will be presented and discussed

A survey on scheduling and mapping techniques in 3D Network-on-chip

Network-on-Chips (NoCs) have been widely employed in the design of multiprocessor system-on-chips (MPSoCs) as a scalable communication solution. NoCs enable communications between on-chip Intellectual Property (IP) cores and allow those cores to achieve higher performance by outsourcing their communication tasks. Mapping and Scheduling methodologies are key elements in assigning application tasks, allocating the tasks to the IPs, and organising communication among them to achieve some specified objectives. The goal of this paper is to present a detailed state-of-the-art of research in the field of mapping and scheduling of applications on 3D NoC, classifying the works based on several dimensions and giving some potential research directions

Design Space Exploration and Resource Management of Multi/Many-Core Systems

The increasing demand of processing a higher number of applications and related data on computing platforms has resulted in reliance on multi-/many-core chips as they facilitate parallel processing. However, there is a desire for these platforms to be energy-efficient and reliable, and they need to perform secure computations for the interest of the whole community. This book provides perspectives on the aforementioned aspects from leading researchers in terms of state-of-the-art contributions and upcoming trends

DESIGN METHODOLOGIES FOR RELIABLE AND ENERGY-EFFICIENT MULTIPROCESSOR SYSTEM

Ph.DDOCTOR OF PHILOSOPH

Contention energy-aware real-time task mapping on NoC based heterogeneous MPSoCs

© 2018 IEEE. Network-on-Chip (NoC)-based multiprocessor system-on-chips (MPSoCs) are becoming the de-facto computing platform for computationally intensive real-time applications in the embedded systems due to their high performance, exceptional quality-of-service (QoS) and energy efficiency over superscalar uniprocessor architectures. Energy saving is important in the embedded system because it reduces the operating cost while prolongs lifetime and improves the reliability of the system. In this paper, contention-aware energy efficient static mapping using NoC-based heterogeneous MPSoC for real-time tasks with an individual deadline and precedence constraints is investigated. Unlike other schemes task ordering, mapping, and voltage assignment are performed in an integrated manner to minimize the processing energy while explicitly reduce contention between the communications and communication energy. Furthermore, both dynamic voltage and frequency scaling and dynamic power management are used for energy consumption optimization. The developed contention-aware integrated task mapping and voltage assignment (CITM-VA) static energy management scheme performs tasks ordering using earliest latest finish time first (ELFTF) strategy that assigns priorities to the tasks having shorter latest finish time (LFT) over the tasks with longer LFT. It remaps every task to a processor and/or discrete voltage level that reduces processing energy consumption. Similarly, the communication energy is minimized by assigning discrete voltage levels to the NoC links. Further, total energy efficiency is achieved by putting the processor into a low-power state when feasible. Moreover, this approach resolves the contention between communications that traverse the same link by allocating links to communications with higher priority. The results obtained through extensive simulations of real-world benchmarks demonstrate that CITM-VA approach outperforms state-of-the-art technique and achieves an average 30% total energy improvement. Additionally, it maintains high QoS and robustness for real-time applications

Fuse-N: Framework for unified simulation environment for network-on-chip

Steady advancements in semiconductor technology over the past few decades have marked incipience of Multi-Processor System-on-Chip (MPSoCs). Owing to the inability of traditional bus-based communication system to scale well with improving microchip technologies, researchers have proposed Network-on-Chip (NoC) as the on-chip communication model. Current uni-processor centric modeling methodology does not address the new design challenges introduced by MPSoCs, thus calling for efficient simulation frameworks capable of capturing the interplay between the application, the architecture, and the network. Addressing these new challenges requires a framework that assists the designer at different abstraction levels of system design; This thesis concentrates on developing a framework for unified simulation environment for NoCs (fuse-N) which simplifies the design space exploration for NoCs by offering a comprehensive simulation support. The framework synthesizes the network infrastructure and the communication model and optimizes application mapping for design constraints. The proposed framework is a hardware-software co-design implementation using SystemC 2.1 and C++. Simulation results show the architectural, network and resource allocation behavior and highlight the quantitative relationships between various design choices; Also, a novel off-line non-preemptive static Traffic Aware Scheduling (TAS) policy is proposed for hard NoC platforms. The proposed scheduling policy maps the application onto the NoC architecture keeping track of the network traffic, which is generated with every resource and communication path allocation. TAS has been evaluated for various design metrics such as application completion time, resource utilization and task throughput. Simulation results show significant improvements over traditional approaches

High level design and control of adaptive multiprocessor system-on-chips

The design of modern embedded systems is getting more and more complex, as more func- tionality is integrated into these systems. At the same time, in order to meet the compu- tational requirements while keeping a low level power consumption, MPSoCs have emerged as the main solutions for such embedded systems. Furthermore, embedded systems are be- coming more and more adaptive, as the adaptivity can bring a number of benefits, such as software flexibility and energy efficiency. This thesis targets the safe design of such adaptive MPSoCs. First, each system configuration must be analyzed concerning its functional and non- functional properties. We present an abstract design and analysis framework, which allows for faster and cost-effective implementation decisions. This framework is intended as an intermediate reasoning support for system level software/hardware co-design environments. It can prune the design space at its largest, and identify candidate design solutions in a fast and efficient way. In the framework, we use an abstract clock-based encoding to model system behaviors. Different mapping and scheduling scenarios of applications on MPSoCs are analyzed via clock traces representing system simulations. Among properties of interest are functional behavioral correctness, temporal performance and energy consumption. Second, the reconfiguration management of adaptive MPSoCs must be addressed. We are specially interested in MPSoCs implemented on reconfigurable hardware architectures (i.e., FPGA fabrics), which provide a good flexibility and computational efficiency for adap- tive MPSoCs. We propose a general design framework based on the discrete controller syn- thesis (DCS) technique to address this issue. The main advantage of this technique is that it allows the automatic controller synthesis w.r.t. a given specification of control objectives. In the framework, the system reconfiguration behavior is modeled in terms of synchronous parallel automata. The reconfiguration management computation problem w.r.t. multiple objectives regarding e.g., resource usages, performance and power consumption is encoded as a DCS problem. The existing BZR programming language and Sigali tool are employed to perform DCS and generate a controller that satisfies the system requirements. Finally, we investigate two different ways of combining the two proposed design frame- works for adaptive MPSoCs. Firstly, they are combined to construct a complete design flow for adaptive MPSoCs. Secondly, they are combined to present how the designed run-time manager by the second framework can be integrated into the first framework so that high level simulations can be performed to assess the run-time manager.La conception de systèmes embarqués modernes est de plus en plus complexe, car plus de fonctionnalités sont intégrées dans ces systèmes. En même temps, afin de répondre aux exigences de calcul tout en conservant une consommation d'énergie de faible niveau, MPSoCs sont apparus comme les principales solutions pour tels systèmes embarqués. En outre, les systèmes embarqués sont de plus en plus adaptatifs, comme l’adaptabilité peut apporter un certain nombre d'avantages, tels que la flexibilité du logiciel et l'efficacité énergétique. Cette thèse vise la conception sécuritaire de ces MPSoCs adaptatifs. Tout d'abord, chaque configuration de système doit être analysée en ce qui concerne ses propriétés fonctionnelles et non fonctionnelles. Nous présentons un cadre abstraite de conception et d’analyse qui permet des décisions d’implémentation plus rapide et plus rentable. Ce cadre est conçu comme un support de raisonnement intermédiaire pour les environnements de co-conception de logiciel / matériel au niveau de système. Il peut élaguer l'espace de conception à sa plus grande portée, et identifier les candidats de solutions de conception de manière rapide et efficace. Dans ce cadre, nous utilisons un codage basé sur l’horloge abstrait pour modéliser les comportements du système. Différents scénarios d'applications de mapping et de planification sur MPSoCs sont analysés via les traces d'horloge qui représentent les simulations du système. Les propriétés d'intérêt sont l’exactitude du comportement fonctionnel, la performance temporelle et la consommation d'énergie. Deuxièmement, la gestion de la reconfiguration de MPSoCs adaptatifs doit être abordée. Nous sommes particulièrement intéressés par les MPSoCs implémentés sur des architectures reconfigurables de hardware (ex. FPGA tissus) qui offrent une bonne flexibilité et une efficacité de calcul pour les MPSoCs adaptatifs. Nous proposons un cadre général de conception basésur la technique de la synthèse de contrôleurs discrets (SCD) pour résoudre ce problème. L’avantage principal de cette technique est qu'elle permet une synthèse d'un contrôleur automatique vis-à-vis d’une spécification donnée des objectifs de contrôle. Dans ce cadre, le comportement de reconfiguration du système est modélisé en termes d'automates synchrones en parallèle. Le problème de calcul de la gestion reconfiguration vis-à-vis de multiples objectifs concernant, par exemple, les usages des ressources, la performance et la consommation d’énergie est codé comme un problème de SCD . Le langage de programmation BZR existant et l’outil Sigali sont employés pour effectuer SCD et générer un contrôleur qui satisfait aux exigences du système. Finalement, nous étudions deux façons différentes de combiner les deux cadres de conception proposées pour MPSoCs adaptatifs. Tout d'abord, ils sont combinés pour construire un flot de conception complet pour MPSoCs adaptatifs. Deuxièmement, ils sont combinés pour présenter la façon dont le gestionnaire d'exécution conçu dans le second cadre peut être intégré dans le premier cadre de sorte que les simulations de haut niveau peuvent être effectuées pour évaluer le gestionnaire d'exécution