Fault estimation and fault-tolerant control for discrete-time dynamic systems

In this paper, a novel discrete-time estimator is proposed, which is employed for simultaneous estimation of system states, and actuator/sensor faults in a discrete-time dynamic system. The existence of the discrete-time simultaneous estimator is proven mathematically. The systematic design procedure for the derivative and proportional observer gains is addressed, enabling the estimation error dynamics to be internally proper and stable, and robust against the effects from the process disturbances, measurement noise, and faults. Based on the estimated fault signals and system states, a discrete-time fault-tolerant design approach is addressed, by which the system may recover the system performance when actuator/sensor faults occur. Finally, the proposed integrated discrete-time fault estimation and fault-tolerant control technique is applied to the vehicle lateral dynamics, which demonstrates the effectiveness of the developed techniques

Robust Fault Tolerant Control for Discrete-Time Dynamic Systems With Applications to Aero Engineering Systems

Unexpected faults in actuators and sensors may degrade the reliability and safety of aero engineering systems. Therefore, there is motivation to develop integrated fault tolerant control techniques with applications to aero engineering systems. In this paper, discrete-time dynamic systems, in the presence of simultaneous actuator/sensor faults, partially decoupled unknown input disturbances, and sensor noises, are investigated. A jointly state/fault estimator is formulated by integrating an unknown input observer, augmented system approach, and optimization algorithm. Unknown input disturbances can be either decoupled by an unknown input observer, or attenuated by a linear matrix inequality optimization, enabling the estimation error to be input-to-state stable. Estimator-based signal compensation is then implemented to mitigate adverse effects from the unanticipated actuator and sensor faults. A pre-designed controller, which maintains normal system behaviors under a fault-free scenario, is allowed to work along with the presented fault tolerant mechanism of the signal compensations. The fault-tolerant closed-loop system can be ensured to mitigate the effects from the faults, guarantee the input-to-state stability, and satisfy the required robustness performance. The proposed fault estimation and fault tolerant control methods are developed for both discrete-time linear and discrete-time Lipschitz nonlinear systems. Finally, the proposed techniques are applied to a jet engine system and a flight control system for simulation validation

Second-Order Fault Tolerant Extended Kalman Filter for Discrete Time Nonlinear Systems

As missing sensor data may severely degrade the overall system performance and stability, reliable state estimation is of great importance in modern data-intensive control, computing, and power systems applications. Aiming at providing a more robust and resilient state estimation technique, this paper presents a novel second-order fault-tolerant extended Kalman filter estimation framework for discrete-time stochastic nonlinear systems under sensor failures, bounded observer-gain perturbation, extraneous noise, and external disturbances condition. The failure mechanism of multiple sensors is assumed to be independent of each other with various malfunction rates. The proposed approach is a locally unbiased, minimum estimation error covariance based nonlinear observer designed for dynamic state estimation under these conditions. It has been successfully applied to a benchmark target-trajectory tracking application. Computer simulation studies have demonstrated that the proposed second-order fault-tolerant extended Kalman filter provides more accurate estimation results, in comparison with traditional first- and second-order extended Kalman filter. Experimental results have demonstrated that the proposed second-order fault-tolerant extended Kalman filter can serve as a powerful alternative to the existing nonlinear estimation approaches

A review of convex approaches for control, observation and safety of linear parameter varying and Takagi-Sugeno systems

This paper provides a review about the concept of convex systems based on Takagi-Sugeno, linear parameter varying (LPV) and quasi-LPV modeling. These paradigms are capable of hiding the nonlinearities by means of an equivalent description which uses a set of linear models interpolated by appropriately defined weighing functions. Convex systems have become very popular since they allow applying extended linear techniques based on linear matrix inequalities (LMIs) to complex nonlinear systems. This survey aims at providing the reader with a significant overview of the existing LMI-based techniques for convex systems in the fields of control, observation and safety. Firstly, a detailed review of stability, feedback, tracking and model predictive control (MPC) convex controllers is considered. Secondly, the problem of state estimation is addressed through the design of proportional, proportional-integral, unknown input and descriptor observers. Finally, safety of convex systems is discussed by describing popular techniques for fault diagnosis and fault tolerant control (FTC).Peer ReviewedPostprint (published version

Smart Power Grid Synchronization With Fault Tolerant Nonlinear Estimation

Effective real-time state estimation is essential for smart grid synchronization, as electricity demand continues to grow, and renewable energy resources increase their penetration into the grid. In order to provide a more reliable state estimation technique to address the problem of bad data in the PMU-based power synchronization, this paper presents a novel nonlinear estimation framework to dynamically track frequency, voltage magnitudes and phase angles. Instead of directly analyzing in abc coordinate frame, symmetrical component transformation is employed to separate the positive, negative, and zero sequence networks. Then, Clarke\u27s transformation is used to transform the sequence networks into the αβ stationary coordinate frame, which leads to system model formulation. A novel fault tolerant extended Kalman filter based real-time estimation framework is proposed for smart grid synchronization with noisy bad data measurements. Computer simulation studies have demonstrated that the proposed fault tolerant extended Kalman filter (FTEKF) provides more accurate voltage synchronization results than the extended Kalman filter (EKF). The proposed approach has been implemented with dSPACE DS1103 and National Instruments CompactRIO hardware platforms. Computer simulation and hardware instrumentation results have shown the potential applications of FTEKF in smart grid synchronization

Integrated fault estimation and accommodation design for discrete-time Takagi-Sugeno fuzzy systems with actuator faults

This paper addresses the problem of integrated robust fault estimation (FE) and accommodation for discrete-time Takagi–Sugeno (T–S) fuzzy systems. First, a multiconstrained reduced-order FE observer (RFEO) is proposed to achieve FE for discrete-time T–S fuzzy models with actuator faults. Based on the RFEO, a new fault estimator is constructed. Then, using the information of online FE, a new approach for fault accommodation based on fuzzy-dynamic output feedback is designed to compensate for the effect of faults by stabilizing the closed-loop systems. Moreover, the RFEO and the dynamic output feedback fault-tolerant controller are designed separately, such that their design parameters can be calculated readily. Simulation results are presented to illustrate our contributions

Fault Detection, Diagnosis and Fault Tolerance Approaches in Dynamic Systems based on Black-Box Models

In this dissertation new contributions to the research area of fault detection and diagnosis in dynamic systems are presented. The main research effort has been done on the development of new on-line model-based fault detection and diagnosis (FDD) approaches based on blackbox models (linear ARX models, and neural nonlinear ARX models). From a theoretical point of view a white-box model is more desirable to perform the FDD tasks, but in most cases it is very hard, or even impossible, to obtain. When the systems are complex, or difficult to model, modelling based on black-box models is usually a good and often the only alternative. The performance of the system identification methods plays a crucial role in the FDD methods proposed. Great research efforts have been made on the development of linear and nonlinear FDD approaches to detect and diagnose multiplicative (parametric) faults, since most of the past research work has been done focused on additive faults on sensors and actuators. The main pre-requisites for the FDD methods developed are: a) the on-line application in a real-time environment for systems under closed-loop control; b) the algorithms must be implemented in discrete time, and the plants are systems in continuous time; c) a two or three dimensional space for visualization and interpretation of the fault symptoms. An engineering and pragmatic view of FDD approaches has been followed, and some new theoretical contributions are presented in this dissertation. The fault tolerance problem and the fault tolerant control (FTC) have been investigated, and some ideas of the new FDD approaches have been incorporated in the FTC context. One of the main ideas underlying the research done in this work is to detect and diagnose faults occurring in continuous time systems via the analysis of the effect on the parameters of the discrete time black-box ARX models or associated features. In the FDD methods proposed, models for nominal operation and models for each faulty situation are constructed in off-line operation, and used a posteriori in on-line operation. The state of the art and some background concepts used for the research come from many scientific areas. The main concepts related to data mining, multivariate statistics (principal component analysis, PCA), linear and nonlinear dynamic systems, black-box models, system identification, fault detection and diagnosis (FDD), pattern recognition and discriminant analysis, and fault tolerant control (FTC), are briefly described. A sliding window version of the principal components regression algorithm, termed SW-PCR, is proposed for parameter estimation. The sliding window parameter estimation algorithms are most appropriate for fault detection and diagnosis than the recursive algorithms. For linear SISO systems, a new fault detection and diagnosis approach based on dynamic features (static gain and bandwidth) of ARX models is proposed, using a pattern classification approach based on neural nonlinear discriminant analysis (NNLDA). A new approach for fault detection (FDE) is proposed based on the application of the PCA method to the parameter space of ARX models; this allows a dimensional reduction, and the definition of thresholds based on multivariate statistics. This FDE method has been combined with a fault diagnosis (FDG) method based on an influence matrix (IMX). This combined FDD method (PCA & IMX) is suitable to deal with SISO or MIMO linear systems. Most of the research on the fault detection and diagnosis area has been done for linear systems. Few investigations exist in the FDD approaches for nonlinear systems. In this work, two new nonlinear approaches to FDD are proposed that are appropriate to SISO or MISO systems. A new architecture for a neural recurrent output predictor (NROP) is proposed, incorporating an embedded neural parallel model, an external feedback and an adjustable gain (design parameter). A new fault detection and diagnosis (FDD) approach for nonlinear systems is proposed based on a bank of neural recurrent output predictors (NROPs). Each neural NROP predictor is tuned to a specific fault. Also, a new FDD method based on the application of neural nonlinear PCA to ARX model parameters is proposed, combined with a pattern classification approach based on neural nonlinear discriminant analysis. In order to evaluate the performance of the proposed FDD methodologies, many experiments have been done using simulation models and a real setup. All the algorithms have been developed in discrete time, except the process models. The process models considered for the validation and tests of the FDD approaches are: a) a first order linear SISO system; b) a second order SISO model of a DC motor; c) a MIMO system model, the three-tank benchmark. A real nonlinear DC motor setup has also been used. A fault tolerant control (FTC) approach has been proposed to solve the typical reconfiguration problem formulated for the three-tank benchmark. This FTC approach incorporates the FDD method based on a bank of NROP predictors, and on an adaptive optimal linear quadratic Gaussian controller

Observer-based fault-tolerant control for a class of networked control systems with transfer delays

Abstract not availableZehui Mao, Bin Jiang, Peng Sh

A survey on fractional order control techniques for unmanned aerial and ground vehicles

In recent years, numerous applications of science and engineering for modeling and control of unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) systems based on fractional calculus have been realized. The extra fractional order derivative terms allow to optimizing the performance of the systems. The review presented in this paper focuses on the control problems of the UAVs and UGVs that have been addressed by the fractional order techniques over the last decade

Fault estimation and active fault tolerant control for linear parameter varying descriptor systems

Starting with the baseline controller design, this paper proposes an integrated approach of active fault tolerant control based on proportional derivative extended state observer (PDESO) for linear parameter varying descriptor systems. The PDESO can simultaneously provide the estimates of the system states, sensor faults, and actuator faults. The L₂ robust performance of the closed-loop system to bounded exogenous disturbance and bounded uncertainty is achieved by a two-step design procedure adapted from the traditional observer-based controller design. Furthermore, an LMI pole-placement region and the L₂ robustness performance are combined into a multiobjective formulation by suitably combing the appropriate LMI descriptions. A parameter-varying system example is given to illustrate the design procedure and the validity of the proposed integrated design approach