74,007 research outputs found
Recommended from our members
CHASSIS : a combined hardware selection and scheduling technique for performance driven synthesis
This report describes a new technique that combines the Hardware Scheduling and Component Selection phases for High Level Synthesis. Our technique simultaneously selects components from a given library while it schedules the operations into different control steps. The algoríthm improves previous work in scheduling because component costs and performance are considered during the scheduling process, enlarging the design search space and resulting in better optimized desígns
LOT: Logic Optimization with Testability - new transformations for logic synthesis
A new approach to optimize multilevel logic circuits is introduced. Given a multilevel circuit, the synthesis method optimizes its area while simultaneously enhancing its random pattern testability. The method is based on structural transformations at the gate level. New transformations involving EX-OR gates as well as Reed–Muller expansions have been introduced in the synthesis of multilevel circuits. This method is augmented with transformations that specifically enhance random-pattern testability while reducing the area. Testability enhancement is an integral part of our synthesis methodology. Experimental results show that the proposed methodology not only can achieve lower area than other similar tools, but that it achieves better testability compared to available testability enhancement tools such as tstfx. Specifically for ISCAS-85 benchmark circuits, it was observed that EX-OR gate-based transformations successfully contributed toward generating smaller circuits compared to other state-of-the-art logic optimization tools
Design of multimedia processor based on metric computation
Media-processing applications, such as signal processing, 2D and 3D graphics
rendering, and image compression, are the dominant workloads in many embedded
systems today. The real-time constraints of those media applications have
taxing demands on today's processor performances with low cost, low power and
reduced design delay. To satisfy those challenges, a fast and efficient
strategy consists in upgrading a low cost general purpose processor core. This
approach is based on the personalization of a general RISC processor core
according the target multimedia application requirements. Thus, if the extra
cost is justified, the general purpose processor GPP core can be enforced with
instruction level coprocessors, coarse grain dedicated hardware, ad hoc
memories or new GPP cores. In this way the final design solution is tailored to
the application requirements. The proposed approach is based on three main
steps: the first one is the analysis of the targeted application using
efficient metrics. The second step is the selection of the appropriate
architecture template according to the first step results and recommendations.
The third step is the architecture generation. This approach is experimented
using various image and video algorithms showing its feasibility
From FPGA to ASIC: A RISC-V processor experience
This work document a correct design flow using these tools in the Lagarto RISC- V Processor and the RTL design considerations that must be taken into account, to move from a design for FPGA to design for ASIC
Implementation of a Combined OFDM-Demodulation and WCDMA-Equalization Module
For a dual-mode baseband receiver for the OFDMWireless LAN andWCDMA standards, integration of the demodulation and equalization tasks on a dedicated hardware module has been investigated. For OFDM demodulation, an FFT algorithm based on cascaded twiddle factor decomposition has been selected. This type of algorithm combines high spatial and temporal regularity in the FFT data-flow graphs with a minimal number of computations. A frequency-domain algorithm based on a circulant channel approximation has been selected for WCDMA equalization. It has good performance, low hardware complexity and a low number of computations. Its main advantage is the reuse of the FFT kernel, which contributes to the integration of both tasks. The demodulation and equalization module has been described at the register transfer level with the in-house developed Arx language. The core of the module is a pipelined radix-23 butterfly combined with a complex multiplier and complex divider. The module has an area of 0.447 mm2 in 0.18 ¿m technology and a power consumption of 10.6 mW. The proposed module compares favorably with solutions reported in literature
Recommended from our members
Chippe : a system for constraint driven behavioral synthesis
This report describes the Chippe system, gives some background previous work and describes several sample design runs of the system. Also presented are the sources of the design tradeoffs used by Chippe, and overview of the internal design model, and experiences using the system
Programmable rate modem utilizing digital signal processing techniques
The engineering development study to follow was written to address the need for a Programmable Rate Digital Satellite Modem capable of supporting both burst and continuous transmission modes with either binary phase shift keying (BPSK) or quadrature phase shift keying (QPSK) modulation. The preferred implementation technique is an all digital one which utilizes as much digital signal processing (DSP) as possible. Here design tradeoffs in each portion of the modulator and demodulator subsystem are outlined, and viable circuit approaches which are easily repeatable, have low implementation losses and have low production costs are identified. The research involved for this study was divided into nine technical papers, each addressing a significant region of concern in a variable rate modem design. Trivial portions and basic support logic designs surrounding the nine major modem blocks were omitted. In brief, the nine topic areas were: (1) Transmit Data Filtering; (2) Transmit Clock Generation; (3) Carrier Synthesizer; (4) Receive AGC; (5) Receive Data Filtering; (6) RF Oscillator Phase Noise; (7) Receive Carrier Selectivity; (8) Carrier Recovery; and (9) Timing Recovery
Velocity Dealiased Spectral Estimators of Range Migrating Targets using a Single Low-PRF Wideband Waveform
Wideband radars are promising systems that may provide numerous advantages, like simultaneous detection of slow and fast moving targets, high range-velocity resolution classification, and electronic countermeasures. Unfortunately, classical processing algorithms are challenged by the range-migration phenomenon that occurs then for fast moving targets. We
propose a new approach where the range migration is used rather as an asset to retrieve information about target velocitiesand, subsequently, to obtain a velocity dealiased mode. More specifically three new complex spectral estimators are devised in case of a single low-PRF (pulse repetition frequency) wideband waveform. The new estimation schemes enable one to decrease the
level of sidelobes that arise at ambiguous velocities and, thus, to enhance the discrimination capability of the radar. Synthetic data and experimental data are used to assess the performance of the proposed estimators
- …