A Scalable Data Dissemination Protocol Based on Vehicles Trajectories Analysis

International audienceSince the last decade, the emergence of affordable wireless devices in vehicle ad-hoc networks has been a key step towards improving road safety as well as transport efficiency. Informing vehicles about interesting safety and non-safety events is of key interest. Thus, the design of an efficient data dissemination protocol has been of paramount importance. A careful scrutiny of the pioneering vehicle-to-vehicle data dissemination approaches highlights that geocasting is the most feasible approach for VANET applications, more especially in safety applications, since safety events are of interest mainly to vehicles located within a specific area, commonly called ZOR or Zone Of Relevance, close to the event. Indeed, the most challenging issue in geocast protocols is the definition of the ZOR for a given event dissemination. In this paper, we introduce a new geocast approach, called Data Dissemination Protocol based on Map Splitting (DPMS). The main thrust of DPMS consists of building the zones of relevance through the mining of correlations between vehicles' trajectories and crossed regions. To do so, we rely on the Formal Concept Analysis (FCA), which is a method of extracting interesting clusters from relational data. The performed experiments show,that DPMS outperforms its competitors in terms of effectiveness and efficiency. (C) 2017 Elsevier B.V. All rights reserved

Inter Vehicle Distance based connectivity aware routing in vehicular adhoc networks

Connectivity in vehicular traffic environment has witnessed significant attention due to the direct impact on the performance of most of the traffic safety applications of intelligent transport system. Various parameters such as density, speed, direction, link quality and inter vehicle distance (IVD) have been utilized for measuring connectivity. IVD has greater impact on connectivity and controls the impact of other parameters. Usage of real time IVD for measuring connectivity has not received sufficient attention in VANETs. This paper proposes IVD based connectivity aware routing (Ivd-CAR) for enhancing connectivity aware data dissemination. IVD calculation is robust and can effectively handle instantaneous GPS failure. Two localization techniques; namely, cooperative localization and Geometry based Localization are developed. Standard deviation of real time IVDs of a forwarding path is derived. Distribution of IVDs of a forwarding path is employed for estimating connectivity. Segment vehicle based next hop vehicle selection is utilized for incorporating network load, link quality and direction into consideration while selecting forwarding path. Simulations are carried out in ns2 to evaluate the performance of Ivd-CAR in realistic traffic environment. Comparative analysis of simulation results attests the superiority of Ivd-CAR to the state-of-the-art techniques: CSR and A-CAR

Recent Multicast Routing Protocols in VANET: Classification and Comparison

الشبكة المخصصة للسيارات (VANET) صنفت باعتبارها واحدة من أهم فئات شبكات الجيل التالي التي طورت في السنوات الأخيرة بسرعة بالنسبة للمركبات وعمليات نقل الطرق. هذه الشبكه يمكن أن تساعد في تنفيذ مجموعة كبيرة من التطبيقات المتعلقة بالمركبات، اشارة المرور، ازدحام المرور، السائقين، الركاب، الإسعاف، الشرطة، سيارات الإطفاء وحتى المشاة. التوجيه هو المشكلة الأبرز في نقل المعلومات في الـ VANET وهناك العديد من وسائط النشر: البث الاحادي، البث المتعدد و البحث في منطقه جغرافيه معينه (geocast). في هذه المقاله سوف نركز فقط على الإرسال المتعدد الذي يشير إلى عملية إرسال معلومات من عقدة واحدة (تسمى المركبة المصدر) إلى مجموعة من العقد الموجودة في مواقع مختلفة (تسمى المركبات الهدف). والغرض من هذه المقالة هو دراسة بروتوكولات توجيه الإرسال المتعدد الموجودة في الـ VANET وإنتاج دراسه جيد عنها وتحديد مزايا وعيوب كل منها وكذلك تصنيفها إلى فئات مختلفة استنادا إلى بعض العوامل المؤثرة مثل نوعية الخدمة، مسار المركبة وما إلى ذلك. وبعد تحليل بروتوكولات التوجيه هذه وجدنا أن هناك حاجة ملحة لإنتاج بروتوكول توجيه متعدد الإرسال فعال لهذه الشبكة لتقليل استهلاك الموارد وتحسين الأداء العام.Vehicular Ad Hoc Network (VANET) classified as one of the most important classes of next generation networks that developed in recent years rapidly for vehicles and road transmissions. It can help in implementing a large set of applications related to vehicles, traffic light, traffic jam, drivers, passengers, ambulance, police, fire trucks and even pedestrians. Routing is the most prominent problem in the transmission of information in VANETs and there are many modes of dissemination: unicast, broadcast, multicast and geocast. In this paper, we will focus only on the multicast that is referring to a process of sending information from one node (called source vehicle) to a group of nodes that found in different locations (called destination vehicles). The purpose of this paper is to study the existing multicast routing protocols in VANET and produce good survey about them and determine the advantages and disadvantages of each one as well as classify them into different categories based on some effected parameters such as quality of service, vehicle trajectory and etc. After analyzing these routing protocols we concluded that there is persistent need to produce efficient multicast routing protocol in this network to decrease the resource consumption and improve the overall performance

Supporting Protocols for Structuring and Intelligent Information Dissemination in Vehicular Ad Hoc Networks

The goal of this dissertation is the presentation of supporting protocols for structuring and intelligent data dissemination in vehicular ad hoc networks (VANETs). The protocols are intended to first introduce a structure in VANETs, and thus promote the spatial reuse of network resources. Segmenting a flat VANET in multiple cluster structures allows for more efficient use of the available bandwidth, which can effectively increase the capacity of the network. The cluster structures can also improve the scalability of the underlying communication protocols. The structuring and maintenance of the network introduces additional overhead. The aim is to provide a mechanism for creating stable cluster structures in VANETs, and to minimize this associated overhead. Further a hybrid overlay-based geocast protocol for VANETs is presented. The protocol utilizes a backbone overlay virtual infrastructure on top of the physical network to provide geocast support, which is crucial for intervehicle communications since many applications provide group-oriented and location-oriented services. The final contribution is a structureless information dissemination scheme which creates a layered view of road conditions with a diminishing resolution as the viewing distance increases. Namely, the scheme first provides a high-detail local view of a given vehicle\u27s neighbors and its immediate neighbors, which is further extended when information dissemination is employed. Each vehicle gets aggregated information for road conditions beyond this extended local view. The scheme allows for the preservation of unique reports within aggregated frames, such that safety critical notifications are kept in high detail, all for the benefit of the driver\u27s improved decision making during emergency scenarios

Performance improvement in geographic routing for vehicular Ad Hoc networks

Geographic routing is one of the most investigated themes by researchers for reliable and efficient dissemination of information in Vehicular Ad Hoc Networks (VANETs). Recently, different Geographic Distance Routing (GEDIR) protocols have been suggested in the literature. These protocols focus on reducing the forwarding region towards destination to select the Next Hop Vehicles (NHV). Most of these protocols suffer from the problem of elevated one-hop link disconnection, high end-to-end delay and low throughput even at normal vehicle speed in high vehicle density environment. This paper proposes a Geographic Distance Routing protocol based on Segment vehicle, Link quality and Degree of connectivity (SLD-GEDIR). The protocol selects a reliable NHV using the criteria segment vehicles, one-hop link quality and degree of connectivity. The proposed protocol has been simulated in NS-2 and its performance has been compared with the state-of-the-art protocols: P-GEDIR, J-GEDIR and V-GEDIR. The empirical results clearly reveal that SLD-GEDIR has lower link disconnection and end-to-end delay, and higher throughput as compared to the state-of-the-art protocols. It should be noted that the performance of the proposed protocol is preserved irrespective of vehicle density and spee

A content dissemination framework for vehicular networking

Vehicular Networks are a peculiar class of wireless mobile networks in which vehicles are equipped with radio interfaces and are, therefore, able to communicate with fixed infrastructure (if available) or other vehicles. Content dissemination has a potential number of applications in vehicular networking, including advertising, traffic warnings, parking notifications and emergency announcements. This thesis addresses two possible dissemination strategies: i) Push-based that is aiming to proactively deliver information to a group of vehicles based on their interests and the level of matching content, and ii) Pull-based that is allowing vehicles to explicitly request custom information. Our dissemination framework is taking into consideration very specific information only available in vehicular networks: the geographical data produced by the navigation system. With its aid, a vehicle's mobility patterns become predictable. This information is exploited to efficiently deliver the content where it is needed. Furthermore, we use the navigation system to automatically filter information which might be relevant to the vehicles. Our framework has been designed and implemented in .NET C# and Microsoft MapPoint. It was tested using a small number of vehicles in the area of Cambridge, UK. Moreover, to prove the correctness of our protocols, we further evaluated it in a large-scale network simulation over a number of realistic vehicular trace-based scenarios. Finally, we built a test-case application aiming to prove that vehicles can gain from such a framework. In this application every vehicle collects and disseminates road traffic information. Vehicles that receive this information can individually evaluate the traffic conditions and take an alternative route, if needed. To evaluate this approach, we collaborated with UCLA's Network Research Lab (NRL), to build a simulator that combines network and dynamic mobility emulation simultaneously. When our dissemination framework is used, the drivers can considerably reduce their trip-times

Quality of service aware data dissemination in vehicular Ad Hoc networks

Des systèmes de transport intelligents (STI) seront éventuellement fournis dans un proche avenir pour la sécurité et le confort des personnes lors de leurs déplacements sur les routes. Les réseaux ad-hoc véhiculaires (VANETs) représentent l'élément clé des STI. Les VANETs sont formés par des véhicules qui communiquent entre eux et avec l'infrastructure. En effet, les véhicules pourront échanger des messages qui comprennent, par exemple, des informations sur la circulation routière, les situations d'urgence et les divertissements. En particulier, les messages d'urgence sont diffusés par des véhicules en cas d'urgence (p.ex. un accident de voiture); afin de permettre aux conducteurs de réagir à temps (p.ex., ralentir), les messages d'urgence doivent être diffusés de manière fiable dans un délai très court. Dans les VANETs, il existe plusieurs facteurs, tels que le canal à pertes, les terminaux cachés, les interférences et la bande passante limitée, qui compliquent énormément la satisfaction des exigences de fiabilité et de délai des messages d'urgence. Dans cette thèse, en guise de première contribution, nous proposons un schéma de diffusion efficace à plusieurs sauts, appelé Dynamic Partitioning Scheme (DPS), pour diffuser les messages d'urgence. DPS calcule les tailles de partitions dynamiques et le calendrier de transmission pour chaque partition; à l'intérieur de la zone arrière de l'expéditeur, les partitions sont calculées de sorte qu'en moyenne chaque partition contient au moins un seul véhicule; l'objectif est de s'assurer que seul un véhicule dans la partition la plus éloignée (de l'expéditeur) est utilisé pour diffuser le message, jusqu'au saut suivant; ceci donne lieu à un délai d'un saut plus court. DPS assure une diffusion rapide des messages d'urgence. En outre, un nouveau mécanisme d'établissement de liaison, qui utilise des tonalités occupées, est proposé pour résoudre le problème du problème de terminal caché. Dans les VANETs, la Multidiffusion, c'est-à-dire la transmission d'un message d'une source à un nombre limité de véhicules connus en tant que destinations, est très importante. Par rapport à la diffusion unique, avec Multidiffusion, la source peut simultanément prendre en charge plusieurs destinations, via une arborescence de multidiffusion, ce qui permet d'économiser de la bande passante et de réduire la congestion du réseau. Cependant, puisque les VANETs ont une topologie dynamique, le maintien de la connectivité de l'arbre de multidiffusion est un problème majeur. Comme deuxième contribution, nous proposons deux approches pour modéliser l'utilisation totale de bande passante d'une arborescence de multidiffusion: (i) la première approche considère le nombre de segments de route impliqués dans l'arbre de multidiffusion et (ii) la seconde approche considère le nombre d'intersections relais dans l'arbre de multidiffusion. Une heuristique est proposée pour chaque approche. Pour assurer la qualité de service de l'arbre de multidiffusion, des procédures efficaces sont proposées pour le suivi des destinations et la surveillance de la qualité de service des segments de route. Comme troisième contribution, nous étudions le problème de la congestion causée par le routage du trafic de données dans les VANETs. Nous proposons (1) une approche de routage basée sur l’infonuagique qui, contrairement aux approches existantes, prend en compte les chemins de routage existants qui relaient déjà les données dans les VANETs. Les nouvelles demandes de routage sont traitées de sorte qu'aucun segment de route ne soit surchargé par plusieurs chemins de routage croisés. Au lieu d'acheminer les données en utilisant des chemins de routage sur un nombre limité de segments de route, notre approche équilibre la charge des données en utilisant des chemins de routage sur l'ensemble des tronçons routiers urbains, dans le but d'empêcher, dans la mesure du possible, les congestions locales dans les VANETs; et (2) une approche basée sur le réseau défini par logiciel (SDN) pour surveiller la connectivité VANET en temps réel et les délais de transmission sur chaque segment de route. Les données de surveillance sont utilisées en entrée de l'approche de routage.Intelligent Transportation Systems (ITS) will be eventually provided in the near future for both safety and comfort of people during their travel on the roads. Vehicular ad-hoc Networks (VANETs), represent the key component of ITS. VANETs consist of vehicles that communicate with each other and with the infrastructure. Indeed, vehicles will be able to exchange messages that include, for example, information about road traffic, emergency situations, and entertainment. Particularly, emergency messages are broadcasted by vehicles in case of an emergency (e.g., car accident); in order to allow drivers to react in time (e.g., slow down), emergency messages must be reliably disseminated with very short delay. In VANETs, there are several factors, such as lossy channel, hidden terminals, interferences and scarce bandwidth, which make satisfying reliability and delay requirements of emergency messages very challenging. In this thesis, as the first contribution, we propose a reliable time-efficient and multi-hop broadcasting scheme, called Dynamic Partitioning Scheme (DPS), to disseminate emergency messages. DPS computes dynamic partition sizes and the transmission schedule for each partition; inside the back area of the sender, the partitions are computed such that in average each partition contains at least a single vehicle; the objective is to ensure that only a vehicle in the farthest partition (from the sender) is used to disseminate the message, to next hop, resulting in shorter one hop delay. DPS ensures fast dissemination of emergency messages. Moreover, a new handshaking mechanism, that uses busy tones, is proposed to solve the problem of hidden terminal problem. In VANETs, Multicasting, i.e. delivering a message from a source to a limited known number of vehicles as destinations, is very important. Compared to Unicasting, with Multicasting, the source can simultaneously support multiple destinations, via a multicast tree, saving bandwidth and reducing overall communication congestion. However, since VANETs have a dynamic topology, maintaining the connectivity of the multicast tree is a major issue. As the second contribution, we propose two approaches to model total bandwidth usage of a multicast tree: (i) the first approach considers the number of road segments involved in the multicast tree and (ii) the second approach considers the number of relaying intersections involved in the multicast tree. A heuristic is proposed for each approach. To ensure QoS of the multicasting tree, efficient procedures are proposed for tracking destinations and monitoring QoS of road segments. As the third contribution, we study the problem of network congestion in routing data traffic in VANETs. We propose (1) a Cloud-based routing approach that, in opposition to existing approaches, takes into account existing routing paths which are already relaying data in VANETs. New routing requests are processed such that no road segment gets overloaded by multiple crossing routing paths. Instead of routing over a limited set of road segments, our approach balances the load of communication paths over the whole urban road segments, with the objective to prevent, whenever possible, local congestions in VANETs; and (2) a Software Defined Networking (SDN) based approach to monitor real-time VANETs connectivity and transmission delays on each road segment. The monitoring data is used as input to the routing approach

Design and analysis of a beacon-less routing protocol for large volume content dissemination in vehicular ad hoc networks

Largevolumecontentdisseminationispursuedbythegrowingnumberofhighquality applications for Vehicular Ad hoc NETworks(VANETs), e.g., the live road surveillance service and the video-based overtaking assistant service. For the highly dynamical vehicular network topology, beacon-less routing protocols have been proven to be efficient in achieving a balance between the system performance and the control overhead. However, to the authors’ best knowledge, the routing design for large volume content has not been well considered in the previous work, which will introduce new challenges, e.g., the enhanced connectivity requirement for a radio link. In this paper, a link Lifetime-aware Beacon-less Routing Protocol (LBRP) is designed for large volume content delivery in VANETs. Each vehicle makes the forwarding decision based on the message header information and its current state, including the speed and position information. A semi-Markov process analytical model is proposed to evaluate the expected delay in constructing one routing path for LBRP. Simulations show that the proposed LBRP scheme outperforms the traditional dissemination protocols in providing a low end-to-end delay. The analytical model is shown to exhibit a good match on the delay estimation with Monte Carlo simulations, as well

Efficient Multi-Hop Communications for Software-Defined Wireless Networks

PhD thesisSoftware-Defined Networking (SDN) recently emerged to overcome the difficulty of network control by decoupling the control plane from the data plane. In terms of the wireless medium and mobile devices, although new challenges are introduced into SDN research, SDN promises to address many inherited problems in wireless communication networks. However, centralised SDN control brings concerns of scalability, reliability, and robustness especially for wireless networks. Considering these concerns, the use of physically distributed SDN controllers has been recognized as an effective solution. Nevertheless, it remains a challenge in regard to how the physically distributed controllers effectively communicate to form a logically centralised network control plane. Dissemination is a type of one-to-many communication service which plays an important role in control information exchange. This research focuses on the strategic packet forwarding for more efficient multi-hop communications in software-defined wireless networks. The research aim is to improve the delivery efficiency by exploiting the delay budget and node mobility. To achieve this objective, existing multi-hop forwarding methods and dissemination schemes in wireless networks are investigated and analysed. In the literature, information from the navigation system of mobile nodes has been utilised to identify candidate relay nodes. However, further studies are required to utilise partially predictable mobility based on more generalised navigational information such as the movement direction. In this research, the feasible exploitation of directional movement in path-unconstrained mobility is investigated for efficient multi-hop communications. Simulation results show that the proposed scheme outperforms the state-of-the-art because directional correlation of node movement is considered to dynamically exploit the delay budget for better selection of the relay node(s).Chinese Scholarship Council (CSC