Estimation of Radiofrequency Power Leakage from Microwave Ovens for Dosimetric Assessment at Nonionizing Radiation Exposure Levels

The electromagnetic field leakage levels of nonionizing radiation from a microwave oven have been estimated within a complex indoor scenario. By employing a hybrid simulation technique, based on coupling full wave simulation with an in-house developed deterministic 3D ray launching code, estimations of the observed electric field values can be obtained for the complete indoor scenario. The microwave oven can be modeled as a time- and frequency-dependent radiating source, in which leakage, basically from the microwave oven door, is propagated along the complete indoor scenario interacting with all of the elements present in it. This method can be of aid in order to assess the impact of such devices on expected exposure levels, allowing adequate minimization strategies such as optimal location to be applied

Çeşitli sıradışı özelliklere sahip üç boyutlu metamalzemelerin hesaplamalı benzetimleri ve gerçeklenmeleri.

In this study, computational analysis and realization of three-dimensional metamaterial structures that induce negative and zero permittivity and/or permeability values in their host environment, as well as plasmonic nanoparticles that are used to design metamaterials at optical frequencies are presented. All these electromagnetic problems are challenging since effective material properties become negative/zero, while numerical solvers are commonly developed for ordinary positive parameters. In real life, three-dimensional metamaterial structures, involving split-ring resonators (SRR), thin wires, and similar subwavelength elements, are designed to exhibit single negativity (imaginary refractive index) and double negativity (negative refractive index) behaviors. However, metamaterial elements have small details with respect to wavelength and they operate when they resonate. Then, their numerical models lead to large matrix equations that are also ill-conditioned, making their solutions extremely difficult, if not impossible. If performed accurately, homogenization simplifies the analysis of metamaterials, while new challenges arise due to extreme parameters. For example, a combination of zero-index (ZI) and near-zero-index (NZI) materials with ordinary media (metals, free space, etc.) results in a high-contrast problem, and numerical instabilities occur particularly due to huge values of wavelength. Similar difficulties arise when considering the plasmonic effects of metals at optical frequencies since they must be modeled as penetrable bodies with negative real permittivity, leading to imaginary index values. Different surface-integral-equation (SIE) formulations and broadband multilevel fast multipole algorithm (MLFMA) implementations are extensively tested for accurate and efficient numerical solutions of ZI, NZI, imaginary-index, and negative-index materials. In addition to their computational simulations, metamaterial designs are fabricated with a low-cost inkjet-printing setup, which is based on using conventional printers that are modified and loaded with silver-based inks. Measurements demonstrate the feasibility of fabricating very low-cost three-dimensional metamaterials using simple inkjet printing.Thesis (M.S.) -- Graduate School of Natural and Applied Sciences. Electrical and Electronics Engineering

Investigations into Optically Controlled Phase Contrast, Polarisation Switchable Narrow Band RF Detection Techniques.

This thesis describes an investigation into S-band microwave frequency phase-contrast imaging. Resolution is a critical issue so system enhancements such as optical remote connection and polarisation-dependant sensing have been implemented within an end-to-end sensing system. Initially, the feasibility of phase-contrast measurements was considered and the limits of phase and amplitude measurements established. A switching matrix was then designed and incorporated into a tri-antenna array to demonstrate triangulation-based location. Commercial, linearly-polarised antennas were then used to demonstrate basic object location. A comprehensive experimental investigation into optical transmission of phase sensitive data using Radio over Fibre (RoF) techniques is then described. Reflective technology and directly modulated Vertical Cavity Surface Emitting Lasers (VCSELs) are assessed for suitability as are Coarse Wavelength Division Multiplexed (CWDM) architectures. These are believed to be a novel contribution in the imaging context as are the techniques employed to enhance and extend the matching and performance of the optical devices. A directly modulated VCSEL based CWDM method was then used over the extended range of 1 km of standard single mode optical fibre. Subsequently, dual polarisation plane techniques were used to generate sequential, orthogonally-separated measurements, which required the development of a suitable antenna. The design, modelling, construction and deployment of a high cross-polar isolation, patch antenna is then described. An antenna with single symmetrical forward lobes (on both polarisation planes) and low back radiation pattern was devised so enabling sensing from a single coincident point. With the device integrated into the final measurement system the resulting “Polarisation Switched, Narrowband, RF Probe System Using a VCSEL Optical Feed” was used to demonstrate improved resolution of a phase contrast RF measurement system at an optically-remoted distance of 1km

Analysis of the high frequency substrate noise effects on LC-VCOs

La integració de transceptors per comunicacions de radiofreqüència en CMOS pot quedar seriosament limitada per la interacció entre els seus blocs, arribant a desaconsellar la utilització de un únic dau de silici. El soroll d’alta freqüència generat per certs blocs, com l’amplificador de potencia, pot viatjar pel substrat i amenaçar el correcte funcionament de l’oscil·lador local. Trobem tres raons importants que mostren aquest risc d’interacció entre blocs i que justifiquen la necessitat d’un estudi profund per minimitzar-lo. Les característiques del substrat fan que el soroll d’alta freqüència es propagui m’és fàcilment que el de baixa freqüència. Per altra banda, les estructures de protecció perden eficiència a mesura que la freqüència augmenta. Finalment, el soroll d’alta freqüència que arriba a l’oscil·lador degrada al seu correcte comportament. El propòsit d’aquesta tesis és analitzar en profunditat la interacció entre el soroll d’alta freqüència que es propaga pel substrat i l’oscil·lador amb l’objectiu de poder predir, mitjançant un model, l’efecte que aquest soroll pot tenir sobre el correcte funcionament de l’oscil·lador. Es volen proporcionar diverses guies i normes a seguir que permeti als dissenyadors augmentar la robustesa dels oscil·ladors al soroll d’alta freqüència que viatja pel substrat. La investigació de l’efecte del soroll de substrat en oscil·ladors s’ha iniciat des d’un punt de vista empíric, per una banda, analitzant la propagació de senyals a través del substrat i avaluant l’eficiència d’estructures per bloquejar aquesta propagació, i per altra, determinant l’efecte d’un to present en el substrat en un oscil·lador. Aquesta investigació ha mostrat que la injecció d’un to d’alta freqüència en el substrat es pot propagar fins arribar a l’oscil·lador i que, a causa del ’pulling’ de freqüència, pot modular en freqüència la sortida de l’oscil·lador. A partir dels resultats de l’anàlisi empíric s’ha aportat un model matemàtic que permet predir l’efecte del soroll en l’oscil·lador. Aquest model té el principal avantatge en el fet de que està basat en paràmetres físics de l’oscil·lador o del soroll, permetent determinar les mesures que un dissenyador pot prendre per augmentar la robustesa de l’oscil·lador així com les conseqüències que aquestes mesures tenen sobre el seu funcionament global (trade-offs). El model ha estat comparat tant amb simulacions com amb mesures reals demostrant ser molt precís a l’hora de predir l’efecte del soroll de substrat. La utilitat del model com a eina de disseny s’ha demostrat en dos estudis. Primerament, les conclusions del model han estat aplicades en el procés de disseny d’un oscil·lador d’ultra baix consum a 2.5GHz, aconseguint un oscil·lador robust al soroll de substrat d’alta freqüència i amb característiques totalment compatibles amb els principals estàndards de comunicació en aquesta banda. Finalment, el model s’ha utilitzat com a eina d’anàlisi per avaluar la causa de les diferències, en termes de robustesa a soroll de substrat, mesurades en dos oscil·ladors a 60GHz amb dues diferents estratègies d’apantallament de l’inductor del tanc de ressonant, flotant en un cas i connectat a terra en l’altre. El model ha mostrat que les diferències en robustesa són causades per la millora en el factor de qualitat i en l’amplitud d’oscil·lació i no per un augment en l’aïllament entre tanc i substrat. Per altra banda, el model ha demostrat ser vàlid i molt precís inclús en aquest rang de freqüència tan extrem. el principal avantatge en el fet de que està basat en paràmetres físics de l’oscil·lador o del soroll, permetent determinar les mesures que un dissenyador pot prendre per augmentar la robustesa de l’oscil·lador així com les conseqüències que aquestes mesures tenen sobre el seu funcionament global (trade-offs). El model ha estat comparat tant amb simulacions com amb mesures reals demostrant ser molt precís a l’hora de predir l’efecte del soroll de substrat. La utilitat del model com a eina de disseny s’ha demostrat en dos estudis. Primerament, les conclusions del model han estat aplicades en el procés de disseny d’un oscil·lador d’ultra baix consum a 2.5GHz, aconseguint un oscil·lador robust al soroll de substrat d’alta freqüència i amb característiques totalment compatibles amb els principals estàndards de comunicació en aquesta banda. Finalment, el model s’ha utilitzat com a eina d’anàlisi per avaluar la causa de les diferències, en termes de robustesa a soroll de substrat, mesurades en dos oscil·ladors a 60GHz amb dues diferents estratègies d’apantallament de l’inductor del tanc de ressonant, flotant en un cas i connectat a terra en l’altre. El model ha mostrat que les diferències en robustesa són causades per la millora en el factor de qualitat i en l’amplitud d’oscil·lació i no per un augment en l’aïllament entre tanc i substrat. Per altra banda, el model ha demostrat ser vàlid i molt precís inclús en aquest rang de freqüència tan extrem.The integration of transceivers for RF communication in CMOS can be seriously limited by the interaction between their blocks, even advising against using a single silicon die. The high frequency noise generated by some of the blocks, like the power amplifier, can travel through the substrate, reaching the local oscillator and threatening its correct performance. Three important reasons can be stated that show the risk of the single die integration. Noise propagation is easier the higher the frequency. Moreover, the protection structures lose efficiency as the noise frequency increases. Finally, the high frequency noise that reaches the local oscillator degrades its performance. The purpose of this thesis is to deeply analyze the interaction between the high frequency substrate noise and the oscillator with the objective of being able to predict, thanks to a model, the effect that this noise may have over the correct behavior of the oscillator. We want to provide some guidelines to the designers to allow them to increase the robustness of the oscillator to high frequency substrate noise. The investigation of the effect of the high frequency substrate noise on oscillators has started from an empirical point of view, on one hand, analyzing the noise propagation through the substrate and evaluating the efficiency of some structures to block this propagation, and on the other hand, determining the effect on an oscillator of a high frequency noise tone present in the substrate. This investigation has shown that the injection of a high frequency tone in the substrate can reach the oscillator and, due to a frequency pulling effect, it can modulate in frequency the output of the oscillator. Based on the results obtained during the empirical analysis, a mathematical model to predict the effect of the substrate noise on the oscillator has been provided. The main advantage of this model is the fact that it is based on physical parameters of the oscillator and of the noise, allowing to determine the measures that a designer can take to increase the robustness of the oscillator as well as the consequences (trade-offs) that these measures have over its global performance. This model has been compared against both, simulations and real measurements, showing a very high accuracy to predict the effect of the high frequency substrate noise. The usefulness of the presented model as a design tool has been demonstrated in two case studies. Firstly, the conclusions obtained from the model have been applied in the design of an ultra low power consumption 2.5 GHz oscillator robust to the high frequency substrate noise with characteristics which make it compatible with the main communication standards in this frequency band. Finally, the model has been used as an analysis tool to evaluate the cause of the differences, in terms of performance degradation due to substrate noise, measured in two 60 GHz oscillators with two different tank inductor shielding strategies, floating and grounded. The model has determined that the robustness differences are caused by the improvement in the tank quality factor and in the oscillation amplitude and no by an increased isolation between the tank and the substrate. The model has shown to be valid and very accurate even in these extreme frequency range.Postprint (published version

Design And Implementation Of An X-Band Passive Rfid Tag

This research presents a novel fully integrated energy harvester, matching network, matching network,matching network, matching network,matching network, matching network, matching network, multi-stage RF-DC rectifier, mode selector, RC oscillator, LC oscillator, and X-band power amplifier implemented in IBM 0.18-µm RF CMOS technology. We investigated different matching schemes, antennas, and rectifiers with focus on the interaction between building blocks. Currently the power amplifier gives the maximum output power of 5.23 dBm at 9.1GHz. The entire RFID tag circuit was designed to operate in low power consumption. Voltage sensor circuit which generates the enable signal was designed to operate in very low current. All the test blocks of the RFID tag were tested. The smaller size and the cost of the RFID tag are critical for widespread adoption of the technology. The cost of the RFID tag can be lowered by implementing an on-chip antenna. We were able to develop, fabricate, and implement a fully integrated RFID tag in a smaller size (3 mm X 1.5 mm) than the existing tags. With further modifications, this could be used as a commercial low cost RFID tag

Wearable antennas: design, connectivity and evaluation measurement techniques

Wearable antennas and electronics technology rapidly grows the last decades and leads to a future where smart textiles will be integrated into our garments. However the wearable technology research includes unsolved or of different approach challenges. This thesis deals with challenges regarding wearable antenna characterization and measurements, textile antennas feeding and textile transmission lines interconnecting. Regarding the wearable antenna characterization and measurements, a novel design of a liquid torso phantom and a new methodology for evaluating wearable antenna performance by using the cylindrical near field measurement technique are proposed. As for the textile antennas and transmission lines feeding and interconnecting, two novel methods are proposed

Fibre-meshed Textile Electromagnetic Structures

This thesis investigated novel textile electromagnetic structures fabricated by a commercial computerized knitting machine. Different electronics such as elliptical waveguides, slotted waveguide antennas (SWA) and frequency selective surfaces (FSS) working at microwave band had been realized with fully textile materials. Knitted polyester was used as a dielectric and silver embedded yarn was knitted to create conducting patterns. Most of the textile electromagnetic structures in this thesis were the first time proposed to the public. Their performances were studied in both simulation and measurement