25,738 research outputs found
Optimised configuration of sensors for fault tolerant control of an electro-magnetic suspension system
For any given system the number and location of sensors can affect the closed-loop performance as well as the reliability of the system. Hence, one problem in control system design is the selection of the sensors in some optimum sense that considers both the system performance and reliability. Although some methods have been proposed that deal with some of the aforementioned aspects, in this work, a design framework dealing with both control and reliability aspects is presented. The proposed framework is able to identify the best sensor set for which optimum performance is achieved even under single or multiple sensor failures with minimum sensor redundancy. The proposed systematic framework combines linear quadratic Gaussian control, fault tolerant control and multiobjective optimisation. The efficacy of the proposed framework is shown via appropriate simulations on an electro-magnetic suspension system
CAutoCSD-evolutionary search and optimisation enabled computer automated control system design
This paper attempts to set a unified scene for various linear time-invariant (LTI) control system design schemes, by transforming the existing concept of 'Computer-Aided Control System Design' (CACSD) to the novel 'Computer-Automated Control System Design' (CAutoCSD). The first step towards this goal is to accommodate, under practical constraints, various design objectives that are desirable in both time and frequency-domains. Such performance-prioritised unification is aimed to relieve practising engineers from having to select a particular control scheme and from sacrificing certain performance goals resulting from pre-committing to the adopted scheme. With the recent progress in evolutionary computing based extra-numeric, multi-criterion search and optimisation techniques, such unification of LTI control schemes becomes feasible, analytically and practically, and the resultant designs can be creative. The techniques developed are applied to, and illustrated by, three design problems. The unified approach automatically provides an integrator for zero-steady state error in velocity control of a DC motor, meets multiple objectives in designing an LTI controller for a non-minimum phase plant and offers a high-performing LTI controller network for a nonlinear chemical process
Intelligent systems in manufacturing: current developments and future prospects
Global competition and rapidly changing customer requirements are demanding increasing changes in manufacturing environments. Enterprises are required to constantly redesign their products and continuously reconfigure their manufacturing systems. Traditional approaches to manufacturing systems do not fully satisfy this new situation. Many authors have proposed that artificial intelligence will bring the flexibility and efficiency needed by manufacturing systems. This paper is a review of artificial intelligence techniques used in manufacturing systems. The paper first defines the components of a simplified intelligent manufacturing systems (IMS), the different Artificial Intelligence (AI) techniques to be considered and then shows how these AI techniques are used for the components of IMS
PID control system analysis, design, and technology
Designing and tuning a proportional-integral-derivative
(PID) controller appears to be conceptually intuitive, but can
be hard in practice, if multiple (and often conflicting) objectives
such as short transient and high stability are to be achieved.
Usually, initial designs obtained by all means need to be adjusted
repeatedly through computer simulations until the closed-loop
system performs or compromises as desired. This stimulates
the development of "intelligent" tools that can assist engineers
to achieve the best overall PID control for the entire operating
envelope. This development has further led to the incorporation
of some advanced tuning algorithms into PID hardware modules.
Corresponding to these developments, this paper presents a
modern overview of functionalities and tuning methods in patents,
software packages and commercial hardware modules. It is seen
that many PID variants have been developed in order to improve
transient performance, but standardising and modularising PID
control are desired, although challenging. The inclusion of system
identification and "intelligent" techniques in software based PID
systems helps automate the entire design and tuning process to
a useful degree. This should also assist future development of
"plug-and-play" PID controllers that are widely applicable and
can be set up easily and operate optimally for enhanced productivity,
improved quality and reduced maintenance requirements
Multi-objective evolutionary–fuzzy augmented flight control for an F16 aircraft
In this article, the multi-objective design of a fuzzy logic augmented flight controller for a high performance fighter jet (the Lockheed-Martin F16) is described. A fuzzy logic controller is designed and its membership functions tuned by genetic algorithms in order to design a roll, pitch, and yaw flight controller with enhanced manoeuverability which still retains safety critical operation when combined with a standard inner-loop stabilizing controller. The controller is assessed in terms of pilot effort and thus reduction of pilot fatigue. The controller is incorporated into a six degree of freedom motion base real-time flight simulator, and flight tested by a qualified pilot instructor
Approximating Pareto frontier using a hybrid line search approach
This is the post-print version of the final paper published in Information Sciences. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2010 Elsevier B.V.The aggregation of objectives in multiple criteria programming is one of the simplest and widely used approach. But it is well known that this technique sometimes fail in different aspects for determining the Pareto frontier. This paper proposes a new approach for multicriteria optimization, which aggregates the objective functions and uses a line search method in order to locate an approximate efficient point. Once the first Pareto solution is obtained, a simplified version of the former one is used in the context of Pareto dominance to obtain a set of efficient points, which will assure a thorough distribution of solutions on the Pareto frontier. In the current form, the proposed technique is well suitable for problems having multiple objectives (it is not limited to bi-objective problems) and require the functions to be continuous twice differentiable. In order to assess the effectiveness of this approach, some experiments were performed and compared with two recent well known population-based metaheuristics namely ParEGO and NSGA II. When compared to ParEGO and NSGA II, the proposed approach not only assures a better convergence to the Pareto frontier but also illustrates a good distribution of solutions. From a computational point of view, both stages of the line search converge within a short time (average about 150 ms for the first stage and about 20 ms for the second stage). Apart from this, the proposed technique is very simple, easy to implement and use to solve multiobjective problems.CNCSIS IDEI 2412, Romani
Two-Timescale Learning Using Idiotypic Behaviour Mediation For A Navigating Mobile Robot
A combined Short-Term Learning (STL) and Long-Term Learning (LTL) approach to
solving mobile-robot navigation problems is presented and tested in both the
real and virtual domains. The LTL phase consists of rapid simulations that use
a Genetic Algorithm to derive diverse sets of behaviours, encoded as variable
sets of attributes, and the STL phase is an idiotypic Artificial Immune System.
Results from the LTL phase show that sets of behaviours develop very rapidly,
and significantly greater diversity is obtained when multiple autonomous
populations are used, rather than a single one. The architecture is assessed
under various scenarios, including removal of the LTL phase and switching off
the idiotypic mechanism in the STL phase. The comparisons provide substantial
evidence that the best option is the inclusion of both the LTL phase and the
idiotypic system. In addition, this paper shows that structurally different
environments can be used for the two phases without compromising
transferability.Comment: 40 pages, 12 tables, Journal of Applied Soft Computin
The Langley Research Center CSI phase-0 evolutionary model testbed-design and experimental results
A testbed for the development of Controls Structures Interaction (CSI) technology is described. The design philosophy, capabilities, and early experimental results are presented to introduce some of the ongoing CSI research at NASA-Langley. The testbed, referred to as the Phase 0 version of the CSI Evolutionary model (CEM), is the first stage of model complexity designed to show the benefits of CSI technology and to identify weaknesses in current capabilities. Early closed loop test results have shown non-model based controllers can provide an order of magnitude increase in damping in the first few flexible vibration modes. Model based controllers for higher performance will need to be robust to model uncertainty as verified by System ID tests. Data are presented that show finite element model predictions of frequency differ from those obtained from tests. Plans are also presented for evolution of the CEM to study integrated controller and structure design as well as multiple payload dynamics
- …