A combined optical, thermal and electrical performance model of a Building Integrated Photovoltaic/Thermal Concentrator (BIPVTC)

The electrical output of concentrating photovoltaic devices is significantly affected by the temperature of the photovoltaic cells. The ability to actively cool photovoltaic cells under concentrated radiation allows their electrical efficiency to be maintained particularly during periods of high solar radiation when concentration offers the maximum benefit. In this study, the design of a novel photovoltaic/thermal solar concentrator for building integration (BIPVTC) is discussed. The optical, thermal and electrical performance of the collector was theoretically modelled and validated with experimental data. The results show that BIPVTC offers improved electrical yields from both concentrating radiation onto the photovoltaic cells and also by actively cooling them

Parallel experimental study of a novel super-thin thermal absorber based photovoltaic/thermal (PV/T) system against conventional photovoltaic (PV) system

Photovoltaic (PV) semiconductor degrades in performance due to temperature rise. A super thin-conductive thermal absorber is therefore developed to regulate the PV working temperature by retrofitting the existing PV panel into the photovoltaic/thermal (PV/T) panel. This article presented the parallel comparative investigation of the two different systems through both laboratory and field experiments. The laboratory evaluation consisted of one PV panel and one PV/T panel respectively while the overall field system involved 15 stand-alone PV panels and 15 retrofitted PV/T panels. The laboratory testing results demonstrated the PV/T panel could achieve the electrical efficiency of about 16.8% (relatively 5% improvement comparing with the stand-alone PV panel), and yield an extra amount of heat with thermal efficiency of nearly 65%. The field testing results indicated that the hybrid PV/T panel could enhance the electrical return of PV panels by nearly 3.5%, and increase the overall energy output by nearly 324.3%. Further opportunities and challenges were then discussed from aspects of different PV/T stakeholders to accelerate the development. It is expected that such technology could become a significant solution to yield more electricity, offset heating load freely and reduce carbon footprint in contemporary energy environment

Performance of a building integrated photovoltaic/thermal (BIPVT) solar collector

The idea of combining photovoltaic and solar thermal collectors (PVT collectors) to provide electrical and heat energy is an area that has, until recently, received only limited attention. Although PVTs are not as prevalent as solar thermal systems, the integration of photovoltaic and solar thermal collectors into the walls or roofing structure of a building could provide greater opportunity for the use of renewable solar energy technologies. In this study, the design of a novel building integrated photovoltaic/thermal (BIPVT) solar collector was theoretically analysed through the use of a modified Hottel–Whillier model and was validated with experimental data from testing on a prototype BIPVT collector. The results showed that key design parameters such as the fin efficiency, the thermal conductivity between the PV cells and their supporting structure, and the lamination method had a significant influence on both the electrical and thermal efficiency of the BIPVT. Furthermore, it was shown that the BIPVT could be made of lower cost materials, such as pre-coated colour steel, without significant decreases in efficiency. Finally, it was shown that by integrating the BIPVT into the building rather than onto the building could result in a lower cost system. This was illustrated by the finding that insulating the rear of the BIPVT may be unnecessary when it is integrated into a roof above an enclosed air filled attic, as this air space acts as a passive insulating barrier

Dynamic simulation and exergetic optimization of a Concentrating Photovoltaic/ Thermal (CPVT) system

The development of a dynamic, theoretical model suitable for the prediction of the long-term performance of a parabolic-trough Concentrating Photovoltaic/Thermal CPVT system is discussed in the present study. The formulation of the mathematical model and the considered geometrical and operational parameters of the system, such as the characteristics of the employed PV modules and active cooling system are described in detail. The effect of heat capacity is taken into consideration in the thermal balances and thus the model is able to capture the transient behavior of the system. Besides, the model is validated using available experimental data of a manufactured prototype CPVT system. The daily performance of system is predicted for different values of the cooling fluid flow rate and temperature under various environmental conditions. At a second stage, an exergy analysis is conducted in order to point out the effect of the characteristics of the main system sub-components on the exergetic efficiency and exergy output of the CPVT system. It was established that the system exergetic performance is primarily influenced by the optical quality of the parabolic trough and the electrical efficiency of the PV module. Increasing these two factors to achievable values, e.g. ηopt = 0.75 and ηel = 0.25, can yield an increase of the system exergetic efficiency from 12% to 24%

Investigation of the energy performance of a novel modular solar building envelope

The major challenges for the integration of solar collecting devices into a building envelope are related to the poor aesthetic view of the appearance of buildings in addition to the low efficiency in collection, transportation, and utilization of the solar thermal and electrical energy. To tackle these challenges, a novel design for the integration of solar collecting elements into the building envelope was proposed and discussed. This involves the dedicated modular and multiple-layer combination of the building shielding, insulation, and solar collecting elements. On the basis of the proposed modular structure, the energy performance of the solar envelope was investigated by using the Energy-Plus software. It was found that the solar thermal efficiency of the modular envelope is in the range of 41.78–59.47%, while its electrical efficiency is around 3.51% higher than the envelopes having photovoltaic (PV) alone. The modular solar envelope can increase thermal efficiency by around 8.49% and the electrical efficiency by around 0.31%, compared to the traditional solar photovoltaic/thermal (PV/T) envelopes. Thus, we have created a new envelope solution with enhanced solar efficiency and an improved aesthetic view of the entire building

Experimental performance of water cooled building integrated photovoltaic/thermal solar collectors

The idea of integrating water cooled photovoltaic/thermal collectors into building structures (BIPVT collectors) to provide electrical and heat energy is an area that has received only limited attention. BIPVT collectors are particularly attractive, as the integration of a single photovoltaic and thermal collector into the long-run roofing structure of a building could provide greater opportunity for the use of renewable solar energy technologies. In this study, the thermal efficiency of a novel low cost water cooled building integrated photovoltaic/thermal (BIPVT) solar collector was experimentally measured. The results show that despite being made of a typical roofing material, the thermal efficiency is not unreasonably affected. Furthermore, it is shown that the measured efficiency is similar to that predicted by the Hottel-Whillier equations

A review of solar collectors and thermal energy storage in solar thermal applications

Thermal applications are drawing increasing attention in the solar energy research field, due to their high performance in energy storage density and energy conversion efficiency. In these applications, solar collectors and thermal energy storage systems are the two core components. This paper focuses on the latest developments and advances in solar thermal applications, providing a review of solar collectors and thermal energy storage systems. Various types of solar collectors are reviewed and discussed, including both non-concentrating collectors (low temperature applications) and concentrating collectors (high temperature applications). These are studied in terms of optical optimisation, heat loss reduction, heat recuperation enhancement and different sun-tracking mechanisms. Various types of thermal energy storage systems are also reviewed and discussed, including sensible heat storage, latent heat storage, chemical storage and cascaded storage. They are studied in terms of design criteria, material selection and different heat transfer enhancement technologies. Last but not least, existing and future solar power stations are overviewed.Peer reviewe

Constructive solution of highly effective photoenergy module: development and experimental testing

Based on experimental study and computermodeling of working temperature influence on the efficiency of Chinese production silicon solar cells identified temperature dependence of efficiency shows the feasibility of using Chinese production Si-SC in the construction of photovoltaic thermal system, which together with the heat pump is part of a combined system for hot water supply, heating and air conditioning. Based on a detailed analysis of the working temperature influence on the efficiency of photovoltaic processes that determine the solar cells work, it has been developed the optimal construction and technological solution of hybrid solar generated module, the main feature ofwhich is the heat exchange block, designed to reduce the solar cells working temperature. The experimental testing of hybrid modules samples equipped with developed cooling system, high-voltage part of power take-off system demonstrates their reliability and high efficiency which allow to achieve the such module efficiency up to 18.5 %.На основе экспериментального исследования в комплексе с компьютерным моделированием влияния рабочей температуры на эффективность кремниевых солнечных элементов китайского производства выявлена температурная зависимость их эффективности. Температурная зависимость показывает целесообразность использования солнечных элементов китайского производства в составе фотоэлектрической тепловой системы, которая вместе с тепловым насосом является частью комбинированной системы горячего водоснабжения, отопления и кондиционирования воздуха. На основе детального анализа влияния рабочей температуры на эффективность фотоэлектрических процессов, определяющих работу солнечных элементов, было разработано оптимальное конструктивно-технологическое решение гибридного солнечного генерирующего модуля, основной особенностью которого является теплообменный блок, предназначен для снижения рабочей температуры солнечных элементов. Экспериментальные испытания образцов таких модулей, оснащенных разработанной системой охлаждения и высоковольтной системой отбора мощности, демонстрируют их надежность и высокую эффективность, позволяющие достичь КПД гибридного модуля до 18,5 %

Potential for Solar Energy in Food Manufacturing, Distribution and Retail

The overall aim of the study was to assess the potential for increasing the use of solar energy in the food sector. For comparative purposes the study also included an assessment of the benefits that could arise from the use of other renewable energy sources, and the potential for more effective use of energy in food retail and distribution. Specific objectives were to: i) establish the current state of the art in relevant available solar technology; ii) identify the barriers for the adoption of solar technology; iii) assess the potential for solar energy capture; iv) appraise the potential of alternative relevant technologies for providing renewable energy; v) assess the benefits from energy saving technologies; vi) compare the alternative strategies for the next 5-10 years and vii) Consider the merits of specific research programmes on solar energy and energy conservation in the food sector. To obtain the views of the main stakeholders in the relevant food and energy sectors on the opportunities and barriers to the adoption of solar energy and other renewable energy technologies by the food industry, personal interviews and structured questionnaires tailored to the main stakeholders (supermarkets, consultants for supermarket design; energy and equipment suppliers) were used. The main findings from the questionnaires and interviews are: - Key personnel in supermarkets and engineers involved in the design of supermarkets are aware of the potential contribution of renewable energy technologies and other energy conservation measures to energy conservation and environmental impact reduction in the food industry. A number of supermarket chains have implemented such technologies at pilot scale to gain operating experience, and more importantly, for marketing reasons, to gain competitive advantage through a green image. - From installations to date in the UK the most notable are a 600 kW wind turbine at a Sainsbury's distribution centre in East Kilbride and a 60 kWp photovoltaic array at a Tesco store in Swansea. - The main barrier to the application of renewable energy technologies in the food sector is the capital cost. Even though significant progress has been made towards the improvement of the energy conversion efficiencies of photovoltaic technologies (PVs) and reduction in their cost, payback periods are still far too long, for them to become attractive to the food industry. - Wind energy can be more attractive than PVs in areas of high wind speed. Apart from relatively high cost, the main barrier to the wide application of wind turbines for local power generation is planning restrictions. This technology is more attractive for application in food distribution centres that are normally located outside build-up areas where planning restrictions can be less severe than in urban areas. In these applications it is likely that preference will be for large wind turbines of more than 1.0 MW power generation capacity as the cost of generation per unit power reduces with the size of the turbine