Fault-Tolerant Ring Embeddings in Hypercubes -- A Reconfigurable Approach

We investigate the problem of designing reconfigurable embedding schemes for a fixed hypercube (without redundant processors and links). The fundamental idea for these schemes is to embed a basic network on the hypercube without fully utilizing the nodes on the hypercube. The remaining nodes can be used as spares to reconfigure the embeddings in case of faults. The result of this research shows that by carefully embedding the application graphs, the topological properties of the embedding can be preserved under fault conditions, and reconfiguration can be carried out efficiently. In this dissertation, we choose the ring as the basic network of interest, and propose several schemes for the design of reconfigurable embeddings with the aim of minimizing reconfiguration cost and performance degradation. The cost is measured by the number of node-state changes or reconfiguration steps needed for processing of the reconfiguration, and the performance degradation is characterized as the dilation of the new embedding after reconfiguration. Compared to the existing schemes, our schemes surpass the existing ones in terms of applicability of schemes and reconfiguration cost needed for the resulting embeddings

Fault-tolerance embedding of rings and arrays in star and pancake graphs

The star and pancake graphs are useful interconnection networks for connecting processors in a parallel and distributed computing environment. The star network has been widely studied and is shown to possess attactive features like sublogarithmic diameter, node and edge symmetry and high resilience. The star/pancake interconnection graphs, {dollar}S\sb{n}/P\sb{n}{dollar} of dimension n have n! nodes connected by {dollar}{(n-1).n!\over2}{dollar} edges. Due to their large number of nodes and interconnections, they are prone to failure of one or more nodes/edges; In this thesis, we present methods to embed Hamiltonian paths (H-path) and Hamiltonian cycles (H-cycle) in a star graph {dollar}S\sb{n}{dollar} and pancake graph {dollar}P\sb{n}{dollar} in a faulty environment. Such embeddings are important for solving computational problems, formulated for array and ring topologies, on star and pancake graphs. The models considered include single-processor failure, double-processor failure, and multiple-processor failures. All the models are applied to an H-cycle which is formed by visiting all the ({dollar}{n!\over4!})\ S\sb4/P\sb4{dollar}s in an {dollar}S\sb{n}/P\sb{n}{dollar} in a particular order. Each {dollar}S\sb4/P\sb4{dollar} has an entry node where the cycle/path enters that particular {dollar}S\sb4/P\sb4{dollar} and an exit node where the path leaves it. Distributed algorithms for embedding hamiltonian cycle in the presence of multiple faults, are also presented for both {dollar}S\sb{n}{dollar} and {dollar}P\sb{n}{dollar}

An Improved Characterization of 1-Step Recoverable Embeddings: Rings in Hypercubes

An embedding is 1-step recoverable if any single fault occurs, the embedding can be reconfigured in one reconfiguration step to maintain the structure of the embedded graph. In this paper we present an efficient scheme to construct this type of 1-step recoverable ring embeddings in the hypercube. Our scheme will guarantee finding a 1-step recoverable embedding of a length-k (even) ring in a d-cube where 6 less than or equal to k less than or equal to (3/4)2/sup d/ and d greater than or equal to 3, provided such an embedding exists. Unlike previously proposed schemes, we solve the general problem of embedding rings of different lengths and the resulting embeddings are of smaller expansion than in previous proposals. A sufficient condition for the non-existence of 1-step recoverable embeddings of rings of length \u3e(3/4)2d in d-cubes is also give

Interconnection Networks Embeddings and Efficient Parallel Computations.

To obtain a greater performance, many processors are allowed to cooperate to solve a single problem. These processors communicate via an interconnection network or a bus. The most essential function of the underlying interconnection network is the efficient interchanging of messages between processes in different processors. Parallel machines based on the hypercube topology have gained a great respect in parallel computation because of its many attractive properties. Many versions of the hypercube have been introduced by many researchers mainly to enhance communications. The twisted hypercube is one of the most attractive versions of the hypercube. It preserves the important features of the hypercube and reduces its diameter by a factor of two. This dissertation investigates relations and transformations between various interconnection networks and the twisted hypercube and explore its efficiency in parallel computation. The capability of the twisted hypercube to simulate complete binary trees, complete quad trees, and rings is demonstrated and compared with the hypercube. Finally, the fault-tolerance of the twisted hypercube is investigated. We present optimal algorithms to simulate rings in a faulty twisted hypercube environment and compare that with the hypercube

Redundancy management for efficient fault recovery in NASA's distributed computing system

The management of redundancy in computer systems was studied and guidelines were provided for the development of NASA's fault-tolerant distributed systems. Fault recovery and reconfiguration mechanisms were examined. A theoretical foundation was laid for redundancy management by efficient reconfiguration methods and algorithmic diversity. Algorithms were developed to optimize the resources for embedding of computational graphs of tasks in the system architecture and reconfiguration of these tasks after a failure has occurred. The computational structure represented by a path and the complete binary tree was considered and the mesh and hypercube architectures were targeted for their embeddings. The innovative concept of Hybrid Algorithm Technique was introduced. This new technique provides a mechanism for obtaining fault tolerance while exhibiting improved performance

Interconnection networks for parallel and distributed computing

Parallel computers are generally either shared-memory machines or distributed- memory machines. There are currently technological limitations on shared-memory architectures and so parallel computers utilizing a large number of processors tend tube distributed-memory machines. We are concerned solely with distributed-memory multiprocessors. In such machines, the dominant factor inhibiting faster global computations is inter-processor communication. Communication is dependent upon the topology of the interconnection network, the routing mechanism, the flow control policy, and the method of switching. We are concerned with issues relating to the topology of the interconnection network. The choice of how we connect processors in a distributed-memory multiprocessor is a fundamental design decision. There are numerous, often conflicting, considerations to bear in mind. However, there does not exist an interconnection network that is optimal on all counts and trade-offs have to be made. A multitude of interconnection networks have been proposed with each of these networks having some good (topological) properties and some not so good. Existing noteworthy networks include trees, fat-trees, meshes, cube-connected cycles, butterflies, Möbius cubes, hypercubes, augmented cubes, k-ary n-cubes, twisted cubes, n-star graphs, (n, k)-star graphs, alternating group graphs, de Bruijn networks, and bubble-sort graphs, to name but a few. We will mainly focus on k-ary n-cubes and (n, k)-star graphs in this thesis. Meanwhile, we propose a new interconnection network called augmented k-ary n- cubes. The following results are given in the thesis.1. Let k ≥ 4 be even and let n ≥ 2. Consider a faulty k-ary n-cube Q(^k_n) in which the number of node faults f(_n) and the number of link faults f(_e) are such that f(_n) + f(_e) ≤ 2n - 2. We prove that given any two healthy nodes s and e of Q(^k_n), there is a path from s to e of length at least k(^n) - 2f(_n) - 1 (resp. k(^n) - 2f(_n) - 2) if the nodes s and e have different (resp. the same) parities (the parity of a node Q(^k_n) in is the sum modulo 2 of the elements in the n-tuple over 0, 1, ∙∙∙ , k - 1 representing the node). Our result is optimal in the sense that there are pairs of nodes and fault configurations for which these bounds cannot be improved, and it answers questions recently posed by Yang, Tan and Hsu, and by Fu. Furthermore, we extend known results, obtained by Kim and Park, for the case when n = 2.2. We give precise solutions to problems posed by Wang, An, Pan, Wang and Qu and by Hsieh, Lin and Huang. In particular, we show that Q(^k_n) is bi-panconnected and edge-bipancyclic, when k ≥ 3 and n ≥ 2, and we also show that when k is odd, Q(^k_n) is m-panconnected, for m = (^n(k - 1) + 2k - 6’ / ‘_2), and (k -1) pancyclic (these bounds are optimal). We introduce a path-shortening technique, called progressive shortening, and strengthen existing results, showing that when paths are formed using progressive shortening then these paths can be efficiently constructed and used to solve a problem relating to the distributed simulation of linear arrays and cycles in a parallel machine whose interconnection network is Q(^k_n) even in the presence of a faulty processor.3. We define an interconnection network AQ(^k_n) which we call the augmented k-ary n-cube by extending a k-ary n-cube in a manner analogous to the existing extension of an n-dimensional hypercube to an n-dimensional augmented cube. We prove that the augmented k-ary n-cube Q(^k_n) has a number of attractive properties (in the context of parallel computing). For example, we show that the augmented k-ary n-cube Q(^k_n) - is a Cayley graph (and so is vertex-symmetric); has connectivity 4n - 2, and is such that we can build a set of 4n - 2 mutually disjoint paths joining any two distinct vertices so that the path of maximal length has length at most max{{n- l)k- (n-2), k + 7}; has diameter [(^k) / (_3)] + [(^k - 1) /( _3)], when n = 2; and has diameter at most (^k) / (_4) (n+ 1), for n ≥ 3 and k even, and at most [(^k)/ (_4) (n + 1) + (^n) / (_4), for n ^, for n ≥ 3 and k odd.4. We present an algorithm which given a source node and a set of n - 1 target nodes in the (n, k)-star graph S(_n,k) where all nodes are distinct, builds a collection of n - 1 node-disjoint paths, one from each target node to the source. The collection of paths output from the algorithm is such that each path has length at most 6k - 7, and the algorithm has time complexity O(k(^3)n(^4))

Hamiltonian Decompositions of Regular Topology Networks with Convergence Routing

This paper introduces new methods to construct multiple virtual rings for loss-free routing of non-reserved bursty data in high-speed environments such as ATM LANs. The routing algorithm on multiple virtual rings is convergence routing which combines the actual routing decision with the internal flow control state. Multiple virtual rings are obtained on the hypercube and the circulant networks such that each virtual ring is hamiltonian, and are mutually edge-disjoint. It is shown that multiple virtual rings improve (i) the bound on the length of routing, and (ii) the fault tolerance. On the circulant graphs, necessary and sufficient conditions for hamiltonian decomposition is established. On the hypercube, three algorithms are designed for an N-node hypercube with even dimension: (i) an O(N) time algorithm to find two edge-disjoint hamiltonian circuits, (ii) an O(N log N) time algorithm to find I01N hamiltonian circuits with only E ~ 0.1 common edges, and (iii) a recursive algorithm for the hamiltonian decomposition of the hypercube with dimension power of two. It is shown analytically, and verified by simulations on the circulants that with the d virtual ring embeddings, a bound of O( N / d) is established on the maximum length of routing

On hardware for generating routes in Kautz digraphs

In this paper we present a hardware implementation of an algorithm for generating node disjoint routes in a Kautz network. Kautz networks are based on a family of digraphs described by W.H. Kautz[Kautz 68]. A Kautz network with in-degree and out-degree d has N = dk + dk¿1 nodes (for any cardinals d, k>0). The diameter is at most k, the degree is fixed and independent of the network size. Moreover, it is fault-tolerant, the connectivity is d and the mapping of standard computation graphs such as a linear array, a ring and a tree on a Kautz network is straightforward.\ud The network has a simple routing mechanism, even when nodes or links are faulty. Imase et al. [Imase 86] showed the existence of d node disjoint paths between any pair of vertices. In Smit et al. [Smit 91] an algorithm is described that generates d node disjoint routes between two arbitrary nodes in the network. In this paper we present a simple and fast hardware implementation of this algorithm. It can be realized with standard components (Field Programmable Gate Arrays)

Parallel Architectures for Planetary Exploration Requirements (PAPER)

The Parallel Architectures for Planetary Exploration Requirements (PAPER) project is essentially research oriented towards technology insertion issues for NASA's unmanned planetary probes. It was initiated to complement and augment the long-term efforts for space exploration with particular reference to NASA/LaRC's (NASA Langley Research Center) research needs for planetary exploration missions of the mid and late 1990s. The requirements for space missions as given in the somewhat dated Advanced Information Processing Systems (AIPS) requirements document are contrasted with the new requirements from JPL/Caltech involving sensor data capture and scene analysis. It is shown that more stringent requirements have arisen as a result of technological advancements. Two possible architectures, the AIPS Proof of Concept (POC) configuration and the MAX Fault-tolerant dataflow multiprocessor, were evaluated. The main observation was that the AIPS design is biased towards fault tolerance and may not be an ideal architecture for planetary and deep space probes due to high cost and complexity. The MAX concepts appears to be a promising candidate, except that more detailed information is required. The feasibility for adding neural computation capability to this architecture needs to be studied. Key impact issues for architectural design of computing systems meant for planetary missions were also identified