Efficient Test Set Modification for Capture Power Reduction

The occurrence of high switching activity when the response to a test vector is captured by flipflops in scan testing may cause excessive IR drop, resulting in significant test-induced yield loss. This paper addresses the problem with a novel method based on test set modification, featuring (1) a new constrained X-identification technique that turns a properly selected set of bits in a fullyspecified test set into X-bits without fault coverage loss, and (2) a new LCP (low capture power) X-filling technique that optimally assigns 0’s and 1’s to the X-bits for the purpose of reducing the switching activity of the resulting test set in capture mode. This method can be readily applied in any test generation flow for capture power reduction without any impact on area, timing, test set size, and fault coverage

Early forest fire detection by vision-enabled wireless sensor networks

Wireless sensor networks constitute a powerful technology particularly suitable for environmental monitoring. With regard to wildfires, they enable low-cost fine-grained surveillance of hazardous locations like wildland-urban interfaces. This paper presents work developed during the last 4 years targeting a vision-enabled wireless sensor network node for the reliable, early on-site detection of forest fires. The tasks carried out ranged from devising a robust vision algorithm for smoke detection to the design and physical implementation of a power-efficient smart imager tailored to the characteristics of such an algorithm. By integrating this smart imager with a commercial wireless platform, we endowed the resulting system with vision capabilities and radio communication. Numerous tests were arranged in different natural scenarios in order to progressively tune all the parameters involved in the autonomous operation of this prototype node. The last test carried out, involving the prescribed burning of a 95 x 20-m shrub plot, confirmed the high degree of reliability of our approach in terms of both successful early detection and a very low false-alarm rate. Journal compilationMinisterio de Ciencia e Innovación TEC2009-11812, IPT-2011-1625-430000Office of Naval Research (USA) N000141110312Centro para el Desarrollo Tecnológico e Industrial IPC-2011100

Process intensification for post combustion CO₂ capture with chemical absorption: a critical review

The concentration of CO₂ in the atmosphere is increasing rapidly. CO₂ emissions may have an impact on global climate change. Effective CO₂ emission abatement strategies such as carbon capture and storage (CCS) are required to combat this trend. Compared with pre-combustion carbon capture and oxy-fuel carbon capture approaches, post-combustion CO₂ capture (PCC) using solvent process is one of the most mature carbon capture technologies. There are two main barriers for the PCC process using solvent to be commercially deployed: (a) high capital cost; (b) high thermal efficiency penalty due to solvent regeneration. Applying process intensification (PI) technology into PCC with solvent process has the potential to significantly reduce capital costs compared with conventional technology using packed columns. This paper intends to evaluate different PI technologies for their suitability in PCC process. The study shows that rotating packed bed (RPB) absorber/stripper has attracted much interest due to its high mass transfer capability. Currently experimental studies on CO₂ capture using RPB are based on standalone absorber or stripper. Therefore a schematic process flow diagram of intensified PCC process is proposed so as to motivate other researches for possible optimal design, operation and control. To intensify heat transfer in reboiler, spinning disc technology is recommended. To replace cross heat exchanger in conventional PCC (with packed column) process, printed circuit heat exchanger will be preferred. Solvent selection for conventional PCC process has been studied extensively. However, it needs more studies for solvent selection in intensified PCC process. The authors also predicted research challenges in intensified PCC process and potential new breakthrough from different aspects

Minimizing Test Power in SRAM through Reduction of Pre-charge Activity

In this paper we analyze the test power of SRAM memories and demonstrate that the full functional pre-charge activity is not necessary during test mode because of the predictable addressing sequence. We exploit this observation in order to minimize power dissipation during test by eliminating the unnecessary power consumption associated with the pre-charge activity. This is achieved through a modified pre-charge control circuitry, exploiting the first degree of freedom of March tests, which allows choosing a specific addressing sequence. The efficiency of the proposed solution is validated through extensive Spice simulations

Production of Sodium Bose--Einstein condensates in an optical dimple trap

We report on the realization of a sodium Bose--Einstein condensate (BEC) in a combined red-detuned optical dipole trap, formed by two beams crossing in a horizontal plane and a third, tightly focused dimple trap propagating vertically. We produce a BEC in three main steps: loading of the crossed dipole trap from laser-cooled atoms, an intermediate evaporative cooling stage which results in efficient loading of the auxiliary dimple trap, and a final evaporative cooling stage in the dimple trap. Our protocol is implemented in a compact setup and allows us to reach quantum degeneracy even with relatively modest initial atom numbers and available laser power

The FHD/ε\boldsymbol{\varepsilon}ppsilon Epoch of Reionization Power Spectrum Pipeline

Epoch of Reionization data analysis requires unprecedented levels of accuracy in radio interferometer pipelines. We have developed an imaging power spectrum analysis to meet these requirements and generate robust 21 cm EoR measurements. In this work, we build a signal path framework to mathematically describe each step in the analysis, from data reduction in the FHD package to power spectrum generation in the $\varepsilon$ppsilon package. In particular, we focus on the distinguishing characteristics of FHD/$\varepsilon$ppsilon: highly accurate spectral calibration, extensive data verification products, and end-to-end error propagation. We present our key data analysis products in detail to facilitate understanding of the prominent systematics in image-based power spectrum analyses. As a verification to our analysis, we also highlight a full-pipeline analysis simulation to demonstrate signal preservation and lack of signal loss. This careful treatment ensures that the FHD/$\varepsilon$ppsilon power spectrum pipeline can reduce radio interferometric data to produce credible 21 cm EoR measurements.Comment: 21 pages, 10 figures, accepted by PAS