Coarse-grained reconfigurable array architectures

Coarse-Grained Reconfigurable Array (CGRA) architectures accelerate the same inner loops that benefit from the high ILP support in VLIW architectures. By executing non-loop code on other cores, however, CGRAs can focus on such loops to execute them more efficiently. This chapter discusses the basic principles of CGRAs, and the wide range of design options available to a CGRA designer, covering a large number of existing CGRA designs. The impact of different options on flexibility, performance, and power-efficiency is discussed, as well as the need for compiler support. The ADRES CGRA design template is studied in more detail as a use case to illustrate the need for design space exploration, for compiler support and for the manual fine-tuning of source code

A Dynamic Reconfiguration Framework to Maximize Performance/Power in Asymmetric Multicore Processors

Recent trends in technology scaling have shifted the processing paradigm to multicores. Depending on the characteristics of the cores, the multicores can be either symmetric or asymmetric. Prior research has shown that Asymmetric Multicore Processors (AMPs) outperform their symmetric (SMP) counterparts within a given resource and power budget. But, due to the heterogeneity in core-types and time-varying workload behavior, thread-to-core assignment is always a challenge in AMPs. As the computational requirements vary significantly across different applications and with time, there is a need to dynamically allocate appropriate computational resources on demand to suit the applications’ current needs, in order to maximize the performance and minimize the energy consumption. Performance/power of the applications could be further increased by dynamically adapting the voltage and frequency of the cores to better fit the changing characteristics of the workloads. Not only can a core be forced to a low power mode when its activity level is low, but the power saved by doing so could be opportunistically re-budgeted to the other cores to boost the overall system throughput. To this end, we propose a novel solution that seamlessly combines heterogeneity with a Dynamic Reconfiguration Framework (DRF). The proposed dynamic reconfiguration framework is equipped with Dynamic Resource Allocation (DRA) and Voltage/Frequency Adaptation (DVFA) capabilities to adapt the core resources and operating conditions at runtime to the changing demands of the applications. As a proof of concept, we illustrate our proposed approach using a dual-core AMP and demonstrate significant performance/power benefits over various baselines

Compilation and Scheduling Techniques for Embedded Systems

Embedded applications are constantly increasing in size, which has resulted in increasing demand on designers of digital signal processors (DSPs) to meet the tight memory, size and cost constraints. With this trend, memory requirement reduction through code compaction and variable coalescing techniques are gaining more ground. Also, as the current trend in complex embedded systems of using multiprocessor system-on-chip (MPSoC) grows, problems like mapping, memory management and scheduling are gaining more attention. The first part of the dissertation deals with problems related to digital signal processors. Most modern DSPs provide multiple address registers and a dedicated address generation unit (AGU) which performs address generation in parallel to instruction execution. A careful placement of variables in memory is important in decreasing the number of address arithmetic instructions leading to compact and efficient code. Chapters 2 and 3 present effective heuristics for the simple and the general offset assignment problems with variable coalescing. A solution based on simulated annealing is also presented. Chapter 4 presents an optimal integer linear programming (ILP) solution to the offset assignment problem with variable coalescing and operand permutation. A new approach to the general offset assignment problem is introduced. Chapter 5 presents an optimal ILP formulation and a genetic algorithm solution to the address register allocation problem (ARA) with code transformation techniques. The ARA problem is used to generate compact codes for array-intensive embedded applications. In the second part of the dissertation, we study problems related to MPSoCs. MPSoCs provide the flexibility to meet the performance requirements of multimedia applications while respecting the tight embedded system constraints. MPSoC-based embedded systems often employ software-managed memories called scratch-pad memories (SPM). Scheduling the tasks of an application on the processors and partitioning the available SPM budget among those processors are two critical issues in reducing the overall computation time. Traditionally, the step of task scheduling is applied separately from the memory partitioning step. Such a decoupled approach may miss better quality schedules. Chapters 6 and 7 present effective heuristics that integrate task allocation and SPM partitioning to further reduce the execution time of embedded applications for single and multi-application scenarios

Efficient memory-level parallelism extraction with decoupled strands

We present Outrider, an architecture for throughput-oriented processors that exploits intra-thread memory-level parallelism (MLP) to improve performance efficiency on highly threaded workloads. Outrider enables a single thread of execution to be presented to the architecture as multiple decoupled instruction streams, consisting of either memory accessing or memory consuming instructions. The key insight is that by decoupling the instruction streams, the processor pipeline can expose MLP in a way similar to out-of-order designs while relying on a low-complexity in-order micro-architecture. Instead of adding more threads as is done in modern GPUs, Outrider can expose the same MLP with fewer threads and reduced contention for resources shared among threads. We demonstrate that Outrider can outperform single-threaded cores by 23-131% and a 4-way simultaneous multi-threaded core by up to 87% in data parallel applications in a 1024-core system. Outrider achieves these performance gains without incurring the overhead of additional hardware thread contexts, which results in improved efficiency compared to a multi-threaded core

SACR: Scheduling-Aware Cache Reconfiguration for Real-Time Embedded Systems

Dynamic reconfiguration techniques are widely used for efficient system optimization. Dynamic cache reconfiguration is a promising approach for reducing energy consumption as well as for improving overall system performance. It is a major challenge to introduce cache reconfiguration into real-time embedded systems since dynamic analysis may adversely affect tasks with real-time constraints. This paper presents a novel approach for implementing cache reconfiguration in soft real-time systems by efficiently leveraging static analysis during execution to both minimize energy and maximize performance. To the best of our knowledge, this is the first attempt to integrate dynamic cache reconfiguration in real-time scheduling techniques. Our experimental results using a wide variety of applications have demonstrated that our approach can significantly (up to 74%) reduce the overall energy consumption of the cache hierarchy in soft real-time systems. 1

Just-in-time Hardware generation for abstracted reconfigurable computing

This thesis addresses the use of reconfigurable hardware in computing platforms, in order to harness the performance benefits of dedicated hardware whilst maintaining the flexibility associated with software. Although the reconfigurable computing concept is not new, the low level nature of the supporting tools normally used, together with the consequent limited level of abstraction and resultant lack of backwards compatibility, has prevented the widespread adoption of this technology. In addition, bandwidth and architectural limitations, have seriously constrained the potential improvements in performance. A review of existing approaches and tools flows is conducted to highlight the current problems being faced in this field. The objective of the work presented in this thesis is to introduce a radically new approach to reconfigurable computing tool flows. The runtime based tool flow introduces complete abstraction between the application developer and the underlying hardware. This new technique eliminates the ease of use and backwards compatibility issues that have plagued the reconfigurable computing concept, and could pave the way for viable mainstream reconfigurable computing platforms. An easy to use, cycle accurate behavioural modelling system is also presented, which was used extensively during the early exploration of new concepts and architectures. Some performance improvements produced by the new reconfigurable computing tool flow, when applied to both a MIPS based embedded platform, and the Cray XDl, are also presented. These results are then analyzed and the hardware and software factors affecting the performance increases that were obtained are discussed, together with potential techniques that could be used to further increase the performance of the system. Lastly a heterogenous computing concept is proposed, in which, a computer system, containing multiple types of computational resource is envisaged, each having their own strengths and weaknesses (e.g. DSPs, CPUs, FPGAs). A revolutionary new method of fully exploiting the potential of such a system, whilst maintaining scalability, backwards compatibility, and ease of use is also presented

Memory Subsystem Optimization Techniques for Modern High-Performance General-Purpose Processors

abstract: General-purpose processors propel the advances and innovations that are the subject of humanity’s many endeavors. Catering to this demand, chip-multiprocessors (CMPs) and general-purpose graphics processing units (GPGPUs) have seen many high-performance innovations in their architectures. With these advances, the memory subsystem has become the performance- and energy-limiting aspect of CMPs and GPGPUs alike. This dissertation identifies and mitigates the key performance and energy-efficiency bottlenecks in the memory subsystem of general-purpose processors via novel, practical, microarchitecture and system-architecture solutions. Addressing the important Last Level Cache (LLC) management problem in CMPs, I observe that LLC management decisions made in isolation, as in prior proposals, often lead to sub-optimal system performance. I demonstrate that in order to maximize system performance, it is essential to manage the LLCs while being cognizant of its interaction with the system main memory. I propose ReMAP, which reduces the net memory access cost by evicting cache lines that either have no reuse, or have low memory access cost. ReMAP improves the performance of the CMP system by as much as 13%, and by an average of 6.5%. Rather than the LLC, the L1 data cache has a pronounced impact on GPGPU performance by acting as the bandwidth filter for the rest of the memory subsystem. Prior work has shown that the severely constrained data cache capacity in GPGPUs leads to sub-optimal performance. In this thesis, I propose two novel techniques that address the GPGPU data cache capacity problem. I propose ID-Cache that performs effective cache bypassing and cache line size selection to improve cache capacity utilization. Next, I propose LATTE-CC that considers the GPU’s latency tolerance feature and adaptively compresses the data stored in the data cache, thereby increasing its effective capacity. ID-Cache and LATTE-CC are shown to achieve 71% and 19.2% speedup, respectively, over a wide variety of GPGPU applications. Complementing the aforementioned microarchitecture techniques, I identify the need for system architecture innovations to sustain performance scalability of GPG- PUs in the face of slowing Moore’s Law. I propose a novel GPU architecture called the Multi-Chip-Module GPU (MCM-GPU) that integrates multiple GPU modules to form a single logical GPU. With intelligent memory subsystem optimizations tailored for MCM-GPUs, it can achieve within 7% of the performance of a similar but hypothetical monolithic die GPU. Taking a step further, I present an in-depth study of the energy-efficiency characteristics of future MCM-GPUs. I demonstrate that the inherent non-uniform memory access side-effects form the key energy-efficiency bottleneck in the future. In summary, this thesis offers key insights into the performance and energy-efficiency bottlenecks in CMPs and GPGPUs, which can guide future architects towards developing high-performance and energy-efficient general-purpose processors.Dissertation/ThesisDoctoral Dissertation Computer Science 201