Preliminary Report on High-Performance Computational Structures for Robot Control

In this report we present some initial results of our work completed thus far on Computational Structures for Robot Control . A SIMD architecture with the crossbar interprocessor network which achieves the parallel processing execution time lower bound of o( [a1n ]), where a1 is a constant and n is the number of manipulator joints, for the computation of the inverse dynamics problem, is discussed. A novel SIMD task scheduling algorithm that optimizes the parallel processing performance on the indicated architecture is also delineated. Simulations performed on this architecture show speedup factor of 3.4 over previous related work completed for the evaluation of the specified problem, is achieved. Parallel processing of PUMA forward and inverse kinematics solutions is next investigated using a particular scheduling algorithm. In addition, a custom bit-serial array architecture is designed for the computation of the inverse dynamics problem within the bit-serial execution time lower bound of o(c1k + c2kn), where c1 and c2 are specified constants, k is the word length, and n is the number of manipulator joints. Finally, mapping of the Newton-Euler equations onto a fixed systolic array is investigated. A balanced architecture for the inverse dynamics problem which achieves the systolic execution time lower bound for the specified problem is depicted. Please note again that these results are only preliminary and improvements to our algorithms and architectures are currently still being made

Phase Synchronization Operator for On-Chip Brain Functional Connectivity Computation

This paper presents an integer-based digital processor for the calculation of phase synchronization between two neural signals. It is based on the measurement of time periods between two consecutive minima. The simplicity of the approach allows for the use of elementary digital blocks, such as registers, counters, and adders. The processor, fabricated in a 0.18- μ m CMOS process, only occupies 0.05 mm 2 and consumes 15 nW from a 0.5 V supply voltage at a signal input rate of 1024 S/s. These low-area and low-power features make the proposed processor a valuable computing element in closed-loop neural prosthesis for the treatment of neural disorders, such as epilepsy, or for assessing the patterns of correlated activity in neural assemblies through the evaluation of functional connectivity maps.Ministerio de Economía y Competitividad TEC2016-80923-POffice of Naval Research (USA) N00014-19-1-215

Hardware/Software co-design with ADC-Less In-memory Computing Hardware for Spiking Neural Networks

Spiking Neural Networks (SNNs) are bio-plausible models that hold great potential for realizing energy-efficient implementations of sequential tasks on resource-constrained edge devices. However, commercial edge platforms based on standard GPUs are not optimized to deploy SNNs, resulting in high energy and latency. While analog In-Memory Computing (IMC) platforms can serve as energy-efficient inference engines, they are accursed by the immense energy, latency, and area requirements of high-precision ADCs (HP-ADC), overshadowing the benefits of in-memory computations. We propose a hardware/software co-design methodology to deploy SNNs into an ADC-Less IMC architecture using sense-amplifiers as 1-bit ADCs replacing conventional HP-ADCs and alleviating the above issues. Our proposed framework incurs minimal accuracy degradation by performing hardware-aware training and is able to scale beyond simple image classification tasks to more complex sequential regression tasks. Experiments on complex tasks of optical flow estimation and gesture recognition show that progressively increasing the hardware awareness during SNN training allows the model to adapt and learn the errors due to the non-idealities associated with ADC-Less IMC. Also, the proposed ADC-Less IMC offers significant energy and latency improvements, $2-7\times$ and $8.9-24.6\times$, respectively, depending on the SNN model and the workload, compared to HP-ADC IMC.Comment: 12 pages, 13 figure

A high-performance inner-product processor for real and complex numbers.

A novel, high-performance fixed-point inner-product processor based on a redundant binary number system is investigated in this dissertation. This scheme decreases the number of partial products to 50%, while achieving better speed and area performance, as well as providing pipeline extension opportunities. When modified Booth coding is used, partial products are reduced by almost 75%, thereby significantly reducing the multiplier addition depth. The design is applicable for digital signal and image processing applications that require real and/or complex numbers inner-product arithmetic, such as digital filters, correlation and convolution. This design is well suited for VLSI implementation and can also be embedded as an inner-product core inside a general purpose or DSP FPGA-based processor. Dynamic control of the computing structure permits different computations, such as a variety of inner-product real and complex number computations, parallel multiplication for real and complex numbers, and real and complex number division. The same structure can also be controlled to accept redundant binary number inputs for multiplication and inner-product computations. An improved 2's-complement to redundant binary converter is also presented

Coarse-grained reconfigurable array architectures

Coarse-Grained Reconfigurable Array (CGRA) architectures accelerate the same inner loops that benefit from the high ILP support in VLIW architectures. By executing non-loop code on other cores, however, CGRAs can focus on such loops to execute them more efficiently. This chapter discusses the basic principles of CGRAs, and the wide range of design options available to a CGRA designer, covering a large number of existing CGRA designs. The impact of different options on flexibility, performance, and power-efficiency is discussed, as well as the need for compiler support. The ADRES CGRA design template is studied in more detail as a use case to illustrate the need for design space exploration, for compiler support and for the manual fine-tuning of source code

Pipelining Of Double Precision Floating Point Division And Square Root Operations On Field-programmable Gate Arrays

Many space applications, such as vision-based systems, synthetic aperture radar, and radar altimetry rely increasingly on high data rate DSP algorithms. These algorithms use double precision floating point arithmetic operations. While most DSP applications can be executed on DSP processors, the DSP numerical requirements of these new space applications surpass by far the numerical capabilities of many current DSP processors. Since the tradition in DSP processing has been to use fixed point number representation, only recently have DSP processors begun to incorporate floating point arithmetic units, even though most of these units handle only single precision floating point addition/subtraction, multiplication, and occasionally division. While DSP processors are slowly evolving to meet the numerical requirements of newer space applications, FPGA densities have rapidly increased to parallel and surpass even the gate densities of many DSP processors and commodity CPUs. This makes them attractive platforms to implement compute-intensive DSP computations. Even in the presence of this clear advantage on the side of FPGAs, few attempts have been made to examine how wide precision floating point arithmetic, particularly division and square root operations, can perform on FPGAs to support these compute-intensive DSP applications. In this context, this thesis presents the sequential and pipelined designs of IEEE-754 compliant double floating point division and square root operations based on low radix digit recurrence algorithms. FPGA implementations of these algorithms have the advantage of being easily testable. In particular, the pipelined designs are synthesized based on careful partial and full unrolling of the iterations in the digit recurrence algorithms. In the overall, the implementations of the sequential and pipelined designs are common-denominator implementations which do not use any performance-enhancing embedded components such as multipliers and block memory. As these implementations exploit exclusively the fine-grain reconfigurable resources of Virtex FPGAs, they are easily portable to other FPGAs with similar reconfigurable fabrics without any major modifications. The pipelined designs of these two operations are evaluated in terms of area, throughput, and dynamic power consumption as a function of pipeline depth. Pipelining experiments reveal that the area overhead tends to remain constant regardless of the degree of pipelining to which the design is submitted, while the throughput increases with pipeline depth. In addition, these experiments reveal that pipelining reduces power considerably in shallow pipelines. Pipelining further these designs does not necessarily lead to significant power reduction. By partitioning these designs into deeper pipelines, these designs can reach throughputs close to the 100 MFLOPS mark by consuming a modest 1% to 8% of the reconfigurable fabric within a Virtex-II XC2VX000 (e.g., XC2V1000 or XC2V6000) FPGA