Improved MDLNS Number System Addition and Subtraction by Use of the Novel Co-Transformation

Multi-Dimensional Logarithmic Number System (MDLNS) is a generalized version of the Logarithmic Number System (LNS) which has multiple dimensions or bases. These generalizations can increase accuracy and hardware efficiency. However, addition and subtraction operations are the major obstruction of all logarithmic number systems circuits and so far a fair amount of research has been done to find practical techniques in LNS to implement these operations efficiently without the need for large tables. In order to achieve this goal, several methods such as interpolation, multipartite tables, and co-transformation have been introduced to decrease the cost and complexity. One of the most recent works is Novel Co-transformation. This thesis investigates the application of the Novel Co-Transformation on MDLNS. The goal is to reduce the table sizes over previously published method which utilizes a different address decoder on its tables which requires greater overhead. The results show that the table sizes are reduced significantly when a minimal error is allowed. Other common LNS techniques for table reductions may be applied to obtain better results

The implementation and applications of multiple-valued logic

Multiple-Valued Logic (MVL) takes two major forms. Multiple-valued circuits can implement the logic directly by using multiple-valued signals, or the logic can be implemented indirectly with binary circuits, by using more than one binary signal to represent a single multiple-valued signal. Techniques such as carry-save addition can be viewed as indirectly implemented MVL. Both direct and indirect techniques have been shown in the past to provide advantages over conventional arithmetic and logic techniques in algorithms required widely in computing for applications such as image and signal processing. It is possible to implement basic MVL building blocks at the transistor level. However, these circuits are difficult to design due to their non binary nature. In the design stage they are more like analogue circuits than binary circuits. Current integrated circuit technologies are biased towards binary circuitry. However, in spite of this, there is potential for power and area savings from MVL circuits, especially in technologies such as BiCMOS. This thesis shows that the use of voltage mode MVL will, in general not provide bandwidth increases on circuit buses because the buses become slower as the number of signal levels increases. Current mode MVL circuits however do have potential to reduce power and area requirements of arithmetic circuitry. The design of transistor level circuits is investigated in terms of a modern production technology. A novel methodology for the design of current mode MVL circuits is developed. The methodology is based upon the novel concept of the use of non-linear current encoding of signals, providing the opportunity for the efficient design of many previously unimplemented circuits in current mode MVL. This methodology is used to design a useful set of basic MVL building blocks, and fabrication results are reported. The creation of libraries of MVL circuits is also discussed. The CORDIC algorithm for two dimensional vector rotation is examined in detail as an example for indirect MVL implementation. The algorithm is extended to a set of three dimensional vector rotators using conventional arithmetic, redundant radix four arithmetic, and Taylor's series expansions. These algorithms can be used for two dimensional vector rotations in which no scale factor corrections are needed. The new algorithms are compared in terms of basic VLSI criteria against previously reported algorithms. A pipelined version of the redundant arithmetic algorithm is floorplanned and partially laid out to give indications of wiring overheads, and layout densities. An indirectly implemented MVL algorithm such as the CORDIC algorithm described in this thesis would clearly benefit from direct implementation in MVL

Application-Specific Number Representation

Reconfigurable devices, such as Field Programmable Gate Arrays (FPGAs), enable application- specific number representations. Well-known number formats include fixed-point, floating- point, logarithmic number system (LNS), and residue number system (RNS). Such different number representations lead to different arithmetic designs and error behaviours, thus produc- ing implementations with different performance, accuracy, and cost. To investigate the design options in number representations, the first part of this thesis presents a platform that enables automated exploration of the number representation design space. The second part of the thesis shows case studies that optimise the designs for area, latency or throughput from the perspective of number representations. Automated design space exploration in the first part addresses the following two major issues: ² Automation requires arithmetic unit generation. This thesis provides optimised arithmetic library generators for logarithmic and residue arithmetic units, which support a wide range of bit widths and achieve significant improvement over previous designs. ² Generation of arithmetic units requires specifying the bit widths for each variable. This thesis describes an automatic bit-width optimisation tool called R-Tool, which combines dynamic and static analysis methods, and supports different number systems (fixed-point, floating-point, and LNS numbers). Putting it all together, the second part explores the effects of application-specific number representation on practical benchmarks, such as radiative Monte Carlo simulation, and seismic imaging computations. Experimental results show that customising the number representations brings benefits to hardware implementations: by selecting a more appropriate number format, we can reduce the area cost by up to 73.5% and improve the throughput by 14.2% to 34.1%; by performing the bit-width optimisation, we can further reduce the area cost by 9.7% to 17.3%. On the performance side, hardware implementations with customised number formats achieve 5 to potentially over 40 times speedup over software implementations

Space Communications: Theory and Applications. Volume 3: Information Processing and Advanced Techniques. A Bibliography, 1958 - 1963

Annotated bibliography on information processing and advanced communication techniques - theory and applications of space communication

Case Studies on Optimizing Algorithms for GPU Architectures

Modern GPUs are complex, massively multi-threaded, and high-performance. Programmers naturally gravitate towards taking advantage of this high performance for achieving faster results. However, in order to do so successfully, programmers must first understand and then master a new set of skills – writing parallel code, using different types of parallelism, adapting to GPU architectural features, and understanding issues that limit performance. In order to ease this learning process and help GPU programmers become productive more quickly, this dissertation introduces three data access skeletons (DASks) – Block, Column, and Row -- and two block access skeletons (BASks) – Block-By-Block and Warp-by-Warp. Each “skeleton” provides a high-performance implementation framework that partitions data arrays into data blocks and then iterates over those blocks. The programmer must still write “body” methods on individual data blocks to solve their specific problem. These skeletons provide efficient machine dependent data access patterns for use on GPUs. DASks group n data elements into m fixed size data blocks. These m data block are then partitioned across p thread blocks using a 1D or 2D layout pattern. The fixed-size data blocks are parameterized using three C++ template parameters – nWork, WarpSize, and nWarps. Generic programming techniques use these three parameters to enable performance experiments on three different types of parallelism – instruction-level parallelism (ILP), data-level parallelism (DLP), and thread-level parallelism (TLP). These different DASks and BASks are introduced using a simple memory I/O (Copy) case study. A nearest neighbor search case study resulted in the development of DASKs and BASks but does not use these skeletons itself. Three additional case studies – Reduce/Scan, Histogram, and Radix Sort -- demonstrate DASks and BASks in action on parallel primitives and also provides more valuable performance lessons.Doctor of Philosoph

Field programmable gate array based sigmoid function implementation using differential lookup table and second order nonlinear function

Artificial neural network (ANN) is an established artificial intelligence technique that is widely used for solving numerous problems such as classification and clustering in various fields. However, the major problem with ANN is a factor of time. ANN takes a longer time to execute a huge number of neurons. In order to overcome this, ANN is implemented into hardware namely field-programmable-gate-array (FPGA). However, implementing the ANN into a field-programmable gate array (FPGA) has led to a new problem related to the sigmoid function implementation. Often used as the activation function for ANN, a sigmoid function cannot be directly implemented in FPGA. Owing to its accuracy, the lookup table (LUT) has always been used to implement the sigmoid function in FPGA. In this case, obtaining the high accuracy of LUT is expensive particularly in terms of its memory requirements in FPGA. Second-order nonlinear function (SONF) is an appealing replacement for LUT due to its small memory requirement. Although there is a trade-off between accuracy and memory size. Taking the advantage of the aforementioned approaches, this thesis proposed a combination of SONF and a modified LUT namely differential lookup table (dLUT). The deviation values between SONF and sigmoid function are used to create the dLUT. SONF is used as the first step to approximate the sigmoid function. Then it is followed by adding or deducting with the value that has been stored in the dLUT as a second step as demonstrated via simulation. This combination has successfully reduced the deviation value. The reduction value is significant as compared to previous implementations such as SONF, and LUT itself. Further simulation has been carried out to evaluate the accuracy of the ANN in detecting the object in an indoor environment by using the proposed method as a sigmoid function. The result has proven that the proposed method has produced the output almost as accurately as software implementation in detecting the target in indoor positioning problems. Therefore, the proposed method can be applied in any field that demands higher processing and high accuracy in sigmoid function outpu

An Efficient Hardware Implementation of LDPC Decoder

Reliable communication over noisy channel is an old but still challenging issues for communication engineers. Low density parity check codes (LDPC) are linear block codes proposed by Robert G. Gallager in 1960. LDPC codes have lesser complexity compared to Turbo-codes. In most recent wireless communication standard, LDPC is used as one of the most popular forward error correction (FEC) codes due to their excellent error-correcting capability. In this thesis we focus on hardware implementation of the LDPC used in Digital Video Broadcasting - Satellite - Second Generation (DVB-S2) standard ratified in 2005. In architecture design of LDPC decoder, because of the structure of DVB-S2, a memory mapping scheme is used that allows 360 functional units implement simultaneously. The functional units are optimized to reduce hardware resource utilization on an FPGA. A novel design of Range addressable look up table (RALUT) for hyperbolic tangent function is proposed that simplifies the LDPC decoding algorithm while the performance remains the same. Commonly, RALUTs are uniformly distributed on input, however, in our proposed method, instead of representing the LUT input uniformly, we use a non-uniform scale assigning more values to those near zero. Zynq XC7Z030, a family of FPGA’s, is used for Evaluation of the complexity of the proposed design. Synthesizes result show the speed increase due to use of LUT method, however, LUT demand more memory. Thus, we decrease the usage of resource by applying RALUT method

Extending functional databases for use in text-intensive applications

This thesis continues research exploring the benefits of using functional databases based around the functional data model for advanced database applications-particularly those supporting investigative systems. This is a growing generic application domain covering areas such as criminal and military intelligence, which are characterised by significant data complexity, large data sets and the need for high performance, interactive use. An experimental functional database language was developed to provide the requisite semantic richness. However, heavy use in a practical context has shown that language extensions and implementation improvements are required-especially in the crucial areas of string matching and graph traversal. In addition, an implementation on multiprocessor, parallel architectures is essential to meet the performance needs arising from existing and projected database sizes in the chosen application area. [Continues.

REAL-TIME ADAPTIVE PULSE COMPRESSION ON RECONFIGURABLE, SYSTEM-ON-CHIP (SOC) PLATFORMS

New radar applications need to perform complex algorithms and process a large quantity of data to generate useful information for the users. This situation has motivated the search for better processing solutions that include low-power high-performance processors, efficient algorithms, and high-speed interfaces. In this work, hardware implementation of adaptive pulse compression algorithms for real-time transceiver optimization is presented, and is based on a System-on-Chip architecture for reconfigurable hardware devices. This study also evaluates the performance of dedicated coprocessors as hardware accelerator units to speed up and improve the computation of computing-intensive tasks such matrix multiplication and matrix inversion, which are essential units to solve the covariance matrix. The tradeoffs between latency and hardware utilization are also presented. Moreover, the system architecture takes advantage of the embedded processor, which is interconnected with the logic resources through high-performance buses, to perform floating-point operations, control the processing blocks, and communicate with an external PC through a customized software interface. The overall system functionality is demonstrated and tested for real-time operations using a Ku-band testbed together with a low-cost channel emulator for different types of waveforms