Vector computer memory bank contention

A number of vector supercomputers feature very large memories. Unfortunately the large capacity memory chips that are used in these computers are much slower than the fast central processing unit (CPU) circuitry. As a result, memory bank reservation times (in CPU ticks) are much longer than on previous generations of computers. A consequence of these long reservation times is that memory bank contention is sharply increased, resulting in significantly lowered performance rates. The phenomenon of memory bank contention in vector computers is analyzed using both a Markov chain model and a Monte Carlo simulation program. The results of this analysis indicate that future generations of supercomputers must either employ much faster memory chips or else feature very large numbers of independent memory banks

Directory Based Cache Coherency Protocols for Shared Memory Multiprocessors

Directory based cache coherency protocols can be used to build large scale, weakly ordered, shared memory multiprocessors. The salient feature of these protocols is that they are interconnection network independent, making them more scaleable than snoopy bus protocols. The major criticisms of previously defined directory protocols point to the size of memory heeded to store the directory and the amount of communication across the interconnection network required to maintain coherence. This thesis tries solving these problems by changing the entry format of the global table, altering the architecture of the global table, and developing new protocols. Some alternative directory entry formats are described, including a special entry format for implementing queueing semaphores. Evaluation of the various entry formats is done with probabilistic models of shared cache blocks and software simulation. A variable length global table organization is presented which can be used to reduce the size of the global table, regardless of the entry format. Its performance is analyzed using software simulation. A protocol which maintains a linked list of processors which have a particular block cached is presented. Several variations of this protocol induce less interconnection network traffic than traditional protocols

A Multi-core processor for hard real-time systems

The increasing demand for new functionalities in current and future hard real-time embedded systems, like the ones deployed in automotive and avionics industries, is driving an increment in the performance required in current embedded processors. Multi-core processors represent a good design solution to cope with such higher performance requirements due to their better performance-per-watt ratio while maintaining the core design simple. Moreover, multi-cores also allow executing mixed-criticality level workloads composed of tasks with and without hard real-time requirements, maximizing the utilization of the hardware resources while guaranteeing low cost and low power consumption. Despite those benefits, current multi-core processors are less analyzable than single-core ones due to the interferences between different tasks when accessing hardware shared resources. As a result, estimating a meaningful Worst-Case Execution Time (WCET) estimation - i.e. to compute an upper bound of the application's execution time - becomes extremely difficult, if not even impossible, because the execution time of a task may change depending on the other threads running at the same time. This makes the WCET of a task dependent on the set of inter-task interferences introduced by the co-running tasks. Providing a WCET estimation independent from the other tasks (time composability property) is a key requirement in hard real-time systems. This thesis proposes a new multi-core processor design in which time composability is achieved, hence enabling the use of multi-cores in hard real-time systems. With our proposals the WCET estimation of a HRT is independent from the other co-running tasks. To that end, we design a multi-core processor in which the maximum delay a request from a Hard Real-time Task (HRT), accessing a hardware shared resource can suffer due to other tasks is bounded: our processor guarantees that a request to a shared resource cannot be delayed longer than a given Upper Bound Delay (UBD). In addition, the UBD allows identifying the impact that different processor configurations may have on the WCET by determining the sensitivity of a HRT to different resource allocations. This thesis proposes an off-line task allocation algorithm (called IA3: Interference-Aware Allocation Algorithm), that allocates tasks in a task set based on the HRT's sensitivity to different resource allocations. As a result the hardware shared resources used by HRTs are minimized, by allowing Non Hard Real-time Tasks (NHRTs) to use the rest of resources. Overall, our proposals provide analyzability for the HRTs allowing NHRTs to be executed into the same chip without any effect on the HRTs. The previous first two proposals of this thesis focused on supporting the execution of multi-programmed workloads with mixed-criticality levels (composed of HRTs and NHRTs). Higher performance could be achieved by implementing multi-threaded applications. As a first step towards supporting hard real-time parallel applications, this thesis proposes a new hardware/software approach to guarantee a predictable execution of software pipelined parallel programs. This thesis also investigates a solution to verify the timing correctness of HRTs without requiring any modification in the core design: we design a hardware unit which is interfaced with the processor and integrated into a functional-safety aware methodology. This unit monitors the execution time of a block of instructions and it detects if it exceeds the WCET. Concretely, we show how to handle timing faults on a real industrial automotive platform.La creciente demanda de nuevas funcionalidades en los sistemas empotrados de tiempo real actuales y futuros en industrias como la automovilística y la de aviación, está impulsando un incremento en el rendimiento necesario en los actuales procesadores empotrados. Los procesadores multi-núcleo son una solución eficiente para obtener un mayor rendimiento ya que aumentan el rendimiento por vatio, manteniendo el diseño del núcleo simple. Por otra parte, los procesadores multi-núcleo también permiten ejecutar cargas de trabajo con niveles de tiempo real mixtas (formadas por tareas de tiempo real duro y laxo así como tareas sin requerimientos de tiempo real), maximizando así la utilización de los recursos de procesador y garantizando el bajo consumo de energía. Sin embargo, a pesar los beneficios mencionados anteriormente, los actuales procesadores multi-núcleo son menos analizables que los de un solo núcleo debido a las interferencias surgidas cuando múltiples tareas acceden simultáneamente a los recursos compartidos del procesador. Como resultado, la estimación del peor tiempo de ejecución (conocido como WCET) - es decir, una cota superior del tiempo de ejecución de la aplicación - se convierte en extremadamente difícil, si no imposible, porque el tiempo de ejecución de una tarea puede cambiar dependiendo de las otras tareas que se estén ejecutando concurrentemente. Determinar una estimación del WCET independiente de las otras tareas es un requisito clave en los sistemas empotrados de tiempo real duro. Esta tesis propone un nuevo diseño de procesador multi-núcleo en el que el tiempo de ejecución de las tareas se puede componer, lo que permitirá el uso de procesadores multi-núcleo en los sistemas de tiempo real duro. Para ello, diseñamos un procesador multi-núcleo en el que la máxima demora que puede sufrir una petición de una tarea de tiempo real duro (HRT) para acceder a un recurso hardware compartido debido a otras tareas está acotado, tiene un límite superior (UBD). Además, UBD permite identificar el impacto que las diferentes posibles configuraciones del procesador pueden tener en el WCET, mediante la determinación de la sensibilidad en la variación del tiempo de ejecución de diferentes reservas de recursos del procesador. Esta tesis propone un algoritmo estático de reserva de recursos (llamado IA3), que asigna tareas a núcleos en función de dicha sensibilidad. Como resultado los recursos compartidos del procesador usados por tareas HRT se reducen al mínimo, permitiendo que las tareas sin requerimiento de tiempo real (NHRTs) puedas beneficiarse del resto de recursos. Por lo tanto, las propuestas presentadas en esta tesis permiten el análisis del WCET para tareas HRT, permitiendo así mismo la ejecución de tareas NHRTs en el mismo procesador multi-núcleo, sin que estas tengan ningún efecto sobre las tareas HRT. Las propuestas presentadas anteriormente se centran en el soporte a la ejecución de múltiples cargas de trabajo con diferentes niveles de tiempo real (HRT y NHRTs). Sin embargo, un mayor rendimiento puede lograrse mediante la transformación una tarea en múltiples sub-tareas paralelas. Esta tesis propone una nueva técnica, con soporte del procesador y del sistema operativo, que garantiza una ejecución analizable del modelo de ejecución paralela software pipelining. Esta tesis también investiga una solución para verificar la corrección del WCET de HRT sin necesidad de ninguna modificación en el diseño de la base: un nuevo componente externo al procesador se conecta a este sin necesidad de modificarlo. Esta nueva unidad monitorea el tiempo de ejecución de un bloque de instrucciones y detecta si se excede el WCET. Esta unidad permite detectar fallos de sincronización en sistemas de computación utilizados en automóviles

Architectural Support for High-Performance, Power-Efficient and Secure Multiprocessor Systems

High performance systems have been widely adopted in many fields and the demand for better performance is constantly increasing. And the need of powerful yet flexible systems is also increasing to meet varying application requirements from diverse domains. Also, power efficiency in high performance computing has been one of the major issues to be resolved. The power density of core components becomes significantly higher, and the fraction of power supply in total management cost is dominant. Providing dependability is also a main concern in large-scale systems since more hardware resources can be abused by attackers. Therefore, designing high-performance, power-efficient and secure systems is crucial to provide adequate performance as well as reliability to users. Adhering to using traditional design methodologies for large-scale computing systems has a limit to meet the demand under restricted resource budgets. Interconnecting a large number of uniprocessor chips to build parallel processing systems is not an efficient solution in terms of performance and power. Chip multiprocessor (CMP) integrates multiple processing cores and caches on a chip and is thought of as a good alternative to previous design trends. In this dissertation, we deal with various design issues of high performance multiprocessor systems based on CMP to achieve both performance and power efficiency while maintaining security. First, we propose a fast and secure off-chip interconnects through minimizing network overheads and providing an efficient security mechanism. Second, we propose architectural support for fast and efficient memory protection in CMP systems, making the best use of the characteristics in CMP environments and multi-threaded workloads. Third, we propose a new router design for network-on-chip (NoC) based on a new memory technique. We introduce hybrid input buffers that use both SRAM and STT-MRAM for better performance as well as power efficiency. Simulation results show that the proposed schemes improve the performance of off-chip networks through reducing the message size by 54% on average. Also, the schemes diminish the overheads of bounds checking operations, thus enhancing the overall performance by 11% on average. Adopting hybrid buffers in NoC routers contributes to increasing the network throughput up to 21%

Memory Optimizations for Time-Predictable Embedded Software

Ph.DDOCTOR OF PHILOSOPH

Scalable directoryless shared memory coherence using execution migration

We introduce the concept of deadlock-free migration-based coherent shared memory to the NUCA family of architectures. Migration-based architectures move threads among cores to guarantee sequential semantics in large multicores. Using a execution migration (EM) architecture, we achieve performance comparable to directory-based architectures without using directories: avoiding automatic data replication significantly reduces cache miss rates, while a fast network-level thread migration scheme takes advantage of shared data locality to reduce remote cache accesses that limit traditional NUCA performance. EM area and energy consumption are very competitive, and, on the average, it outperforms a directory-based MOESI baseline by 6.8% and a traditional S-NUCA design by 9.2%. We argue that with EM scaling performance has much lower cost and design complexity than in directory-based coherence and traditional NUCA architectures: by merely scaling network bandwidth from 128 to 256 (512) bit flits, the performance of our architecture improves by an additional 8% (12%), while the baselines show negligible improvement

Array-specific dataflow caches for high-level synthesis of memory-intensive algorithms on FPGAs

Designs implemented on field-programmable gate arrays (FPGAs) via high-level synthesis (HLS) suffer from off-chip memory latency and bandwidth bottlenecks. FPGAs can access both large but slow off-chip memories (DRAM), and fast but small on-chip memories (block RAMs and registers). HLS tools allow exploiting the memory hierarchy in a scratchpad-like fashion, requring a significant manual effort. We propose an automation of the FPGA memory management in Xilinx Vitis HLS through a fully- configurable C++ source-level cache. Each DRAM-mapped array can be associated with a private level 2 (L2) cache with one or more ports, and each port can optionally provide level 1 cache. The L2 cache runs in a separate dataflow task with respect to the application accessing it. This solution isolates off-chip memory accesses and data buffering into dedicated dataflow tasks, resembling the load, compute, store design paradigm, but without the drawback of manual algorithm refactoring. Experimental results collected from FPGA board show that our cache speeds up the execution of a variety of benchmarks by up to 60 times compared to the out-of-the-box solution provided by HLS, requiring very limited optimization effort. Our caches are not meant to compete with manually optimized implementations quality of results (QoR), but rather to significantly save design effort, in exchange for some QoR, to make the HLS flow a bit more software-like, allowing the designer to focus on algorithmic optimizations, rather than on explicit memory management. Moreover, caching could be the only feasible memory optimization for algorithms with data-dependent or irregular memory access patterns, but with good data locality

Runtime-assisted optimizations in the on-chip memory hierarchy

Following Moore's Law, the number of transistors on chip has been increasing exponentially, which has led to the increasing complexity of modern processors. As a result, the efficient programming of such systems has become more difficult. Many programming models have been developed to answer this issue. Of particular interest are task-based programming models that employ simple annotations to define parallel work in an application. The information available at the level of the runtime systems associated with these programming models offers great potential for improving hardware design. Moreover, due to technological limitations, Moore's Law is predicted to eventually come to an end, so novel paradigms are necessary to maintain the current performance improvement trends. The main goal of this thesis is to exploit the knowledge about a parallel application available at the runtime system level to improve the design of the on-chip memory hierarchy. The coupling of the runtime system and the microprocessor enables a better hardware design without hurting the programmability. The first contribution is a set of insertion policies for shared last-level caches that exploit information about tasks and task data dependencies. The intuition behind this proposal revolves around the observation that parallel threads exhibit different memory access patterns. Even within the same thread, accesses to different variables often follow distinct patterns. The proposed policies insert cache lines into different logical positions depending on the dependency type and task type to which the corresponding memory request belongs. The second proposal optimizes the execution of reductions, defined as a programming pattern that combines input data to form the resulting reduction variable. This is achieved with a runtime-assisted technique for performing reductions in the processor's cache hierarchy. The proposal's goal is to be a universally applicable solution regardless of the reduction variable type, size and access pattern. On the software level, the programming model is extended to let a programmer specify the reduction variables for tasks, as well as the desired cache level where a certain reduction will be performed. The source-to-source compiler and the runtime system are extended to translate and forward this information to the underlying hardware. On the hardware level, private and shared caches are equipped with functional units and the accompanying logic to perform reductions at the cache level. This design avoids unnecessary data movements to the core and back as the data is operated at the place where it resides. The third contribution is a runtime-assisted prioritization scheme for memory requests inside the on-chip memory hierarchy. The proposal is based on the notion of a critical path in the context of parallel codes and a known fact that accelerating critical tasks reduces the execution time of the whole application. In the context of this work, task criticality is observed at a level of a task type as it enables simple annotation by the programmer. The acceleration of critical tasks is achieved by the prioritization of corresponding memory requests in the microprocessor.Siguiendo la ley de Moore, el número de transistores en los chips ha crecido exponencialmente, lo que ha comportado una mayor complejidad en los procesadores modernos y, como resultado, de la dificultad de la programación eficiente de estos sistemas. Se han desarrollado muchos modelos de programación para resolver este problema; un ejemplo particular son los modelos de programación basados en tareas, que emplean anotaciones sencillas para definir los Trabajos paralelos de una aplicación. La información de que disponen los sistemas en tiempo de ejecución (runtime systems) asociada con estos modelos de programación ofrece un enorme potencial para la mejora del diseño del hardware. Por otro lado, las limitaciones tecnológicas hacen que la ley de Moore pueda dejar de cumplirse próximamente, por lo que se necesitan paradigmas nuevos para mantener las tendencias actuales de mejora de rendimiento. El objetivo principal de esta tesis es aprovechar el conocimiento de las aplicaciones paral·leles de que dispone el runtime system para mejorar el diseño de la jerarquía de memoria del chip. El acoplamiento del runtime system junto con el microprocesador permite realizar mejores diseños hardware sin afectar Negativamente en la programabilidad de dichos sistemas. La primera contribución de esta tesis consiste en un conjunto de políticas de inserción para las memorias caché compartidas de último nivel que aprovecha la información de las tareas y las dependencias de datos entre estas. La intuición tras esta propuesta se basa en la observación de que los hilos de ejecución paralelos muestran distintos patrones de acceso a memoria e, incluso dentro del mismo hilo, los accesos a diferentes variables a menudo siguen patrones distintos. Las políticas que se proponen insertan líneas de caché en posiciones lógicas diferentes en función de los tipos de dependencia y tarea a los que corresponde la petición de memoria. La segunda propuesta optimiza la ejecución de las reducciones, que se definen como un patrón de programación que combina datos de entrada para conseguir la variable de reducción como resultado. Esto se consigue mediante una técnica asistida por el runtime system para la realización de reducciones en la jerarquía de la caché del procesador, con el objetivo de ser una solución aplicable de forma universal sin depender del tipo de la variable de la reducción, su tamaño o el patrón de acceso. A nivel de software, el modelo de programación se extiende para que el programador especifique las variables de reducción de las tareas, así como el nivel de caché escogido para que se realice una determinada reducción. El compilador fuente a Fuente (compilador source-to-source) y el runtime ssytem se modifican para que traduzcan y pasen esta información al hardware subyacente, evitando así movimientos de datos innecesarios hacia y desde el núcleo del procesador, al realizarse la operación donde se encuentran los datos de la misma. La tercera contribución proporciona un esquema de priorización asistido por el runtime system para peticiones de memoria dentro de la jerarquía de memoria del chip. La propuesta se basa en la noción de camino crítico en el contexto de los códigos paralelos y en el hecho conocido de que acelerar tareas críticas reduce el tiempo de ejecución de la aplicación completa. En el contexto de este trabajo, la criticidad de las tareas se considera a nivel del tipo de tarea ya que permite que el programador las indique mediante anotaciones sencillas. La aceleración de las tareas críticas se consigue priorizando las correspondientes peticiones de memoria en el microprocesador.Seguint la llei de Moore, el nombre de transistors que contenen els xips ha patit un creixement exponencial, fet que ha provocat un augment de la complexitat dels processadors moderns i, per tant, de la dificultat de la programació eficient d’aquests sistemes. Per intentar solucionar-ho, s’han desenvolupat diversos models de programació; un exemple particular en són els models basats en tasques, que fan servir anotacions senzilles per definir treballs paral·lels dins d’una aplicació. La informació que hi ha al nivell dels sistemes en temps d’execució (runtime systems) associada amb aquests models de programació ofereix un gran potencial a l’hora de millorar el disseny del maquinari. D’altra banda, les limitacions tecnològiques fan que la llei de Moore pugui deixar de complir-se properament, per la qual cosa calen nous paradigmes per mantenir les tendències actuals en la millora de rendiment. L’objectiu principal d’aquesta tesi és aprofitar els coneixements que el runtime System té d’una aplicació paral·lela per millorar el disseny de la jerarquia de memòria dins el xip. L’acoblament del runtime system i el microprocessador permet millorar el disseny del maquinari sense malmetre la programabilitat d’aquests sistemes. La primera contribució d’aquesta tesi consisteix en un conjunt de polítiques d’inserció a les memòries cau (cache memories) compartides d’últim nivell que aprofita informació sobre tasques i les dependències de dades entre aquestes. La intuïció que hi ha al darrere d’aquesta proposta es basa en el fet que els fils d’execució paral·lels mostren diferents patrons d’accés a la memòria; fins i tot dins el mateix fil, els accessos a variables diferents sovint segueixen patrons diferents. Les polítiques que s’hi proposen insereixen línies de la memòria cau a diferents ubicacions lògiques en funció dels tipus de dependència i de tasca als quals correspon la petició de memòria. La segona proposta optimitza l’execució de les reduccions, que es defineixen com un patró de programació que combina dades d’entrada per aconseguir la variable de reducció com a resultat. Això s’aconsegueix mitjançant una tècnica assistida pel runtime system per dur a terme reduccions en la jerarquia de la memòria cau del processador, amb l’objectiu que la proposta sigui aplicable de manera universal, sense dependre del tipus de la variable a la qual es realitza la reducció, la seva mida o el patró d’accés. A nivell de programari, es realitza una extensió del model de programació per facilitar que el programador especifiqui les variables de les reduccions que usaran les tasques, així com el nivell de memòria cau desitjat on s’hauria de realitzar una certa reducció. El compilador font a font (compilador source-to-source) i el runtime system s’amplien per traduir i passar aquesta informació al maquinari subjacent. A nivell de maquinari, les memòries cau privades i compartides s’equipen amb unitats funcionals i la lògica corresponent per poder dur a terme les reduccions a la pròpia memòria cau, evitant així moviments de dades innecessaris entre el nucli del processador i la jerarquia de memòria. La tercera contribució proporciona un esquema de priorització assistit pel runtime System per peticions de memòria dins de la jerarquia de memòria del xip. La proposta es basa en la noció de camí crític en el context dels codis paral·lels i en el fet conegut que l’acceleració de les tasques que formen part del camí crític redueix el temps d’execució de l’aplicació sencera. En el context d’aquest treball, la criticitat de les tasques s’observa al nivell del seu tipus ja que permet que el programador les indiqui mitjançant anotacions senzilles. L’acceleració de les tasques crítiques s’aconsegueix prioritzant les corresponents peticions de memòria dins el microprocessador

AN ARCHITECTURE EVALUATION AND IMPLEMENTATION OF A SOFT GPGPU FOR FPGAs

Embedded and mobile systems must be able to execute a variety of different types of code, often with minimal available hardware. Many embedded systems now come with a simple processor and an FPGA, but not more energy-hungry components, such as a GPGPU. In this dissertation we present FlexGrip, a soft architecture which allows for the execution of GPGPU code on an FPGA without the need to recompile the design. The architecture is optimized for FPGA implementation to effectively support the conditional and thread-based execution characteristics of GPGPU execution without FPGA design recompilation. This architecture supports direct CUDA compilation to a binary which is executable on the FPGA-based GPGPU. Our architecture is customizable, thus providing the FPGA designer with a selection of GPGPU cores which display performance versus area tradeoffs. This dissertation describes the FlexGrip architecture in detail and showcases the benefits by evaluating the design for a collection of five standard CUDA benchmarks which are compiled using standard GPGPU compilation tools. Speedups of 23x, on average, versus a MicroBlaze microprocessor are achieved for designs which take advantage of the conditional execution capabilities offered by FlexGrip. We also show FlexGrip can achieve an 80% average reduction of dynamic energy versus the MicroBlaze microprocessor. The dissertation furthers discussion by exploring application-customized versions of the soft GPGPU, thus exploiting the overlay architecture. We expand the architecture to multiple processors per GPGPU and optimizing away features which are not needed by certain classes of applications. These optimizations, which include the effective use of block RAMs and DSP blocks, are critical to the performance of FlexGrip. By implementing a 2 GPGPU design, we show speedups of 44x on average versus a MicroBlaze microprocessor. Application-customized versions of the soft GPGPU can be used to further reduce dynamic energy consumption by an average of 14%. To complete this thesis, we augmented a GPGPU cycle accurate simulator to emulate FlexGrip and evaluate different levels of cache design spaces. We show performance increases for select benchmarks, however, we also show that 64% and 45% of benchmarks exhibited performance decreases when L1D cache was enabled for the 1 SMP and 2 SMP configurations, and only one benchmark showed performance improvement when the L2 cache was enabled