105 research outputs found
Scaling up MIMO: Opportunities and Challenges with Very Large Arrays
This paper surveys recent advances in the area of very large MIMO systems.
With very large MIMO, we think of systems that use antenna arrays with an
order of magnitude more elements than in systems being built today, say a
hundred antennas or more. Very large MIMO entails an unprecedented number of
antennas simultaneously serving a much smaller number of terminals. The
disparity in number emerges as a desirable operating condition and a practical
one as well. The number of terminals that can be simultaneously served is
limited, not by the number of antennas, but rather by our inability to acquire
channel-state information for an unlimited number of terminals. Larger numbers
of terminals can always be accommodated by combining very large MIMO technology
with conventional time- and frequency-division multiplexing via OFDM. Very
large MIMO arrays is a new research field both in communication theory,
propagation, and electronics and represents a paradigm shift in the way of
thinking both with regards to theory, systems and implementation. The ultimate
vision of very large MIMO systems is that the antenna array would consist of
small active antenna units, plugged into an (optical) fieldbus.Comment: Accepted for publication in the IEEE Signal Processing Magazine,
October 201
Advances in Multi-User Scheduling and Turbo Equalization for Wireless MIMO Systems
Nach einer Einleitung behandelt Teil 2 Mehrbenutzer-Scheduling für die
Abwärtsstrecke von drahtlosen MIMO Systemen mit einer Sendestation und
kanaladaptivem precoding: In jeder Zeit- oder Frequenzressource kann eine
andere Nutzergruppe gleichzeitig bedient werden, räumlich getrennt durch
unterschiedliche Antennengewichte. Nutzer mit korrelierten Kanälen sollten
nicht gleichzeitig bedient werden, da dies die räumliche Trennbarkeit
erschwert. Die Summenrate einer Nutzermenge hängt von den Antennengewichten
ab, die wiederum von der Nutzerauswahl abhängen. Zur Entkopplung des
Problems schlägt diese Arbeit Metriken vor basierend auf einer geschätzten
Rate mit ZF precoding. Diese lässt sich mit Hilfe von wiederholten
orthogonalen Projektionen abschätzen, wodurch die Berechnung von
Antennengewichten beim Scheduling entfällt. Die Ratenschätzung kann
basierend auf momentanen Kanalmessungen oder auf gemittelter Kanalkenntnis
berechnet werden und es können Datenraten- und Fairness-Kriterien
berücksichtig werden. Effiziente Suchalgorithmen werden vorgestellt, die
die gesamte Systembandbreite auf einmal bearbeiten können und zur
Komplexitätsreduktion die Lösung in Zeit- und Frequenz nachführen können.
Teil 3 zeigt wie mehrere Sendestationen koordiniertes Scheduling und
kooperative Signalverarbeitung einsetzen können. Mittels orthogonalen
Projektionen ist es möglich, Inter-Site Interferenz zu schätzen, ohne
Antennengewichte berechnen zu müssen. Durch ein Konzept virtueller Nutzer
kann der obige Scheduling-Ansatz auf mehrere Sendestationen und sogar
Relays mit SDMA erweitert werden. Auf den benötigten Signalisierungsaufwand
wird kurz eingegangen und eine Methode zur Schätzung der Summenrate eines
Systems ohne Koordination besprochen. Teil4 entwickelt Optimierungen für
Turbo Entzerrer. Diese Nutzen Signalkorrelation als Quelle von Redundanz.
Trotzdem kann eine Kombination mit MIMO precoding sinnvoll sein, da bei
Annahme realistischer Fehler in der Kanalkenntnis am Sender keine optimale
Interferenzunterdrückung möglich ist. Mit Hilfe von EXIT Charts wird eine
neuartige Methode zur adaptiven Nutzung von a-priori-Information zwischen
Iterationen entwickelt, die die Konvergenz verbessert. Dabei wird gezeigt,
wie man semi-blinde Kanalschätzung im EXIT chart berücksichtigen kann.
In Computersimulationen werden alle Verfahren basierend auf
4G-Systemparametern überprüft.After an introduction, part 2 of this thesis deals with downlink multi-user
scheduling for wireless MIMO systems with one transmitting station
performing channel adaptive precoding:Different user subsets can be served
in each time or frequency resource by separating them in space with
different antenna weight vectors. Users with correlated channel matrices
should not be served jointly since correlation impairs the spatial
separability.The resulting sum rate for each user subset depends on the
precoding weights, which in turn depend on the user subset. This thesis
manages to decouple this problem by proposing a scheduling metric based on
the rate with ZF precoding such as BD, written with the help of orthogonal
projection matrices. It allows estimating rates without computing any
antenna weights by using a repeated projection approximation.This rate
estimate allows considering user rate requirements and fairness criteria
and can work with either instantaneous or long term averaged channel
knowledge.Search algorithms are presented to efficiently solve user
grouping or selection problems jointly for the entire system bandwidth
while being able to track the solution in time and frequency for complexity
reduction.
Part 3 shows how multiple transmitting stations can benefit from
cooperative scheduling or joint signal processing. An orthogonal projection
based estimate of the inter-site interference power, again without
computing any antenna weights, and a virtual user concept extends the
scheduling approach to cooperative base stations and finally included SDMA
half-duplex relays in the scheduling.Signalling overhead is discussed and a
method to estimate the sum rate without coordination.
Part 4 presents optimizations for Turbo Equalizers. There, correlation
between user signals can be exploited as a source of redundancy.
Nevertheless a combination with transmit precoding which aims at reducing
correlation can be beneficial when the channel knowledge at the transmitter
contains a realistic error, leading to increased correlation. A novel
method for adaptive re-use of a-priori information between is developed to
increase convergence by tracking the iterations online with EXIT charts.A
method is proposed to model semi-blind channel estimation updates in an
EXIT chart.
Computer simulations with 4G system parameters illustrate the methods using realistic channel models.Im Buchhandel erhältlich:
Advances in Multi-User Scheduling and Turbo Equalization for Wireless MIMO Systems / Fuchs-Lautensack,Martin
Ilmenau: ISLE, 2009,116 S.
ISBN 978-3-938843-43-
Waveforms and channel coding for 5G
Abstract. The fifth generation (5G) communication systems are required to perform significantly better than the existing fourth generation (4G) systems in data rate, capacity, coverage, latency, energy consumption and cost. Hence, 5G needs to achieve considerable enhancements in the areas of bandwidth, spectral, energy, and signaling efficiencies and cost per bit. The new radio access technology (RAT) of 5G physical layer needs to utilize an efficient waveform to meet the demands of 5G. Orthogonal frequency division multiplexing (OFDM) is considered as a baseline for up to 30 GHz. However, a major drawback of OFDM systems is their large peak to average power ratio (PAPR). Here in this thesis, a simple selective-mapping (SLM) technique using scrambling is proposed to reduce the PAPR of OFDM signals. This technique selects symbol sequences with high PAPR and scrambles them until a PAPR sequence below a specific threshold is generated. The computational complexity of the proposed scheme is considerably lower than that of the traditional SLM. Also, performance of the system is investigated through simulations and more than 4.5 dB PAPR reduction is achieved. In addition, performance of single carrier waveforms is analyzed in multiple-input multiple-output (MIMO) systems as an alternative to OFDM. Performance of a single carrier massive MIMO system is presented for both uplink and downlink with single user and multiple user cases and the effect of pre-coding on the PAPR is studied. A variety of channel configurations were investigated such as correlated channels, practical channels and the channels with errors in channel estimate. Furthermore, the candidate coding schemes are investigated for the new RAT in the 5G standard corresponding the activities in the third generation partnership project (3GPP). The schemes are evaluated in terms of block error rate (BLER), bit error rate (BER), computational complexity, and flexibility. These parameters comprise a suitable set to assess the performance of different services and applications. Turbo, low density parity check (LDPC), and polar codes are considered as the candidate schemes. These are investigated in terms of obtaining suitable rates, block lengths by proper design for a fair comparison. The simulations have been carried out in order to obtain BLER / BER performance for various code rates and block lengths, in additive white Gaussian noise (AWGN) channel. Although polar codes perform well at short block lengths, LDPC has a relatively good performance at all the block lengths and code rates. In addition, complexity of the LDPC codes is relatively low. Furthermore, BLER/BER performances of the coding schemes in Rayleigh fading channels are investigated and found that the fading channel performance follows a similar trend as the performance in the AWGN channel
Signal Processing and Learning for Next Generation Multiple Access in 6G
Wireless communication systems to date primarily rely on the orthogonality of
resources to facilitate the design and implementation, from user access to data
transmission. Emerging applications and scenarios in the sixth generation (6G)
wireless systems will require massive connectivity and transmission of a deluge
of data, which calls for more flexibility in the design concept that goes
beyond orthogonality. Furthermore, recent advances in signal processing and
learning have attracted considerable attention, as they provide promising
approaches to various complex and previously intractable problems of signal
processing in many fields. This article provides an overview of research
efforts to date in the field of signal processing and learning for
next-generation multiple access, with an emphasis on massive random access and
non-orthogonal multiple access. The promising interplay with new technologies
and the challenges in learning-based NGMA are discussed
D3.2 First performance results for multi -node/multi -antenna transmission technologies
This deliverable describes the current results of the multi-node/multi-antenna technologies
investigated within METIS and analyses the interactions within and outside Work Package 3.
Furthermore, it identifies the most promising technologies based on the current state of
obtained results. This document provides a brief overview of the results in its first part. The second part, namely the Appendix, further details the results, describes the simulation
alignment efforts conducted in the Work Package and the interaction of the Test Cases. The
results described here show that the investigations conducted in Work Package 3
are maturing resulting in valuable innovative solutions for future 5G systems.Fantini. R.; Santos, A.; De Carvalho, E.; Rajatheva, N.; Popovski, P.; Baracca, P.; Aziz, D.... (2014). D3.2 First performance results for multi -node/multi -antenna transmission technologies. http://hdl.handle.net/10251/7675
Principles of Physical Layer Security in Multiuser Wireless Networks: A Survey
This paper provides a comprehensive review of the domain of physical layer
security in multiuser wireless networks. The essential premise of
physical-layer security is to enable the exchange of confidential messages over
a wireless medium in the presence of unauthorized eavesdroppers without relying
on higher-layer encryption. This can be achieved primarily in two ways: without
the need for a secret key by intelligently designing transmit coding
strategies, or by exploiting the wireless communication medium to develop
secret keys over public channels. The survey begins with an overview of the
foundations dating back to the pioneering work of Shannon and Wyner on
information-theoretic security. We then describe the evolution of secure
transmission strategies from point-to-point channels to multiple-antenna
systems, followed by generalizations to multiuser broadcast, multiple-access,
interference, and relay networks. Secret-key generation and establishment
protocols based on physical layer mechanisms are subsequently covered.
Approaches for secrecy based on channel coding design are then examined, along
with a description of inter-disciplinary approaches based on game theory and
stochastic geometry. The associated problem of physical-layer message
authentication is also introduced briefly. The survey concludes with
observations on potential research directions in this area.Comment: 23 pages, 10 figures, 303 refs. arXiv admin note: text overlap with
arXiv:1303.1609 by other authors. IEEE Communications Surveys and Tutorials,
201
A White Paper on Broadband Connectivity in 6G
Executive Summary
This white paper explores the road to implementing broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, from extreme capacity with peak data rates up to 1 Tbps, to raising the typical data rates by orders-of-magnitude, to support broadband connectivity at railway speeds up to 1000 km/h. To achieve these goals, not only the terrestrial networks will be evolved but they will also be integrated with satellite networks, all facilitating autonomous systems and various interconnected structures.
We believe that several categories of enablers at the infrastructure, spectrum, and protocol/algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we consider ultra-massive MIMO technology (possibly implemented using holographic radio), intelligent reflecting surfaces, user-centric and scalable cell-free networking, integrated access and backhaul, and integrated space and terrestrial networks. At the spectrum level, the network must seamlessly utilize sub-6 GHz bands for coverage and spatial multiplexing of many devices, while higher bands will be used for pushing the peak rates of point-to-point links. The latter path will lead to THz communications complemented by visible light communications in specific scenarios. At the protocol/algorithmic level, the enablers include improved coding, modulation, and waveforms to achieve lower latencies, higher reliability, and reduced complexity. Different options will be needed to optimally support different use cases. The resource efficiency can be further improved by using various combinations of full-duplex radios, interference management based on rate-splitting, machine-learning-based optimization, coded caching, and broadcasting. Finally, the three levels of enablers must be utilized not only to deliver better broadband services in urban areas, but also to provide full-coverage broadband connectivity must be one of the key outcomes of 6G
Nonorthogonal Multiple Access for 5G and Beyond
This work was
supported in part by the U.K. Engineering and Physical Sciences Research Council
(EPSRC) under Grant EP/N029720/1 and Grant EP/N029720/2. The work of
L. Hanzo was supported by the ERC Advanced Fellow Grant Beam-me-up
D 3. 3 Final performance results and consolidated view on the most promising multi -node/multi -antenna transmission technologies
This document provides the most recent updates on the technical contributions and research
challenges focused in WP3. Each Technology Component (TeC) has been evaluated
under possible uniform assessment framework of WP3 which is based on the simulation guidelines
of WP6. The performance assessment is supported by the simulation results which are in their
mature and stable state. An update on the Most Promising Technology Approaches (MPTAs)
and their associated TeCs is the main focus of this document. Based on the input of all the TeCs in WP3, a consolidated view of WP3 on the role of multinode/multi-antenna transmission
technologies in 5G systems has also been provided. This consolidated view is further
supported in this document by the presentation of the impact of MPTAs on METIS scenarios
and the addressed METIS goals.Aziz, D.; Baracca, P.; De Carvalho, E.; Fantini, R.; Rajatheva, N.; Popovski, P.; Sørensen, JH.... (2015). D 3. 3 Final performance results and consolidated view on the most promising multi -node/multi -antenna transmission technologies. http://hdl.handle.net/10251/7675
Interference Exploitation via Symbol-Level Precoding: Overview, State-of-the-Art and Future Directions
Interference is traditionally viewed as a performance limiting factor in wireless communication systems, which is to be minimized or mitigated. Nevertheless, a recent line of work has shown that by manipulating the interfering signals such that they add up constructively at the receiver side, known interference can be made beneficial and further improve the system performance in a variety of wireless scenarios, achieved by symbol-level precoding (SLP). This paper aims to provide a tutorial on interference exploitation techniques from the perspective of precoding design in a multi-antenna wireless communication system, by beginning with the classification of constructive interference (CI) and destructive interference (DI). The definition for CI is presented and the corresponding mathematical characterization is formulated for popular modulation types, based on which optimization-based precoding techniques are discussed. In addition, the extension of CI precoding to other application scenarios as well as for hardware efficiency is also described. Proof-of-concept testbeds are demonstrated for the potential practical implementation of CI precoding, and finally a list of open problems and practical challenges are presented to inspire and motivate further research directions in this area
- …