181 research outputs found

    Echo State Networks as Novel Approach for Low-Cost Myoelectric Control

    Get PDF
    Prahm C, Schulz A, Paaßen B, Aszmann O, Hammer B, Dorffner G. Echo State Networks as Novel Approach for Low-Cost Myoelectric Control. In: ten Telje A, Popow C, Holmes JH, Sacchi L, eds. Proceedings of the 16th Conference on Artificial Intelligence in Medicine (AIME 2017). Lecture Notes in Computer Science. Vol 10259. Springer; 2017: 338--342.Myoelectric signals or muscle signals provide an intuitive and rapid interface for controlling technical devices, in particular bionic arm prostheses. However, inferring the intended movement from a surface myoelectric recording is a non-trivial pattern recognition task, especially if myoelectric data stems from low-cost sensors. At the same time, overly complex models are prohibited by strict speed, data parsimonity and robustness requirements. As a compromise between high accuracy and strict requirements we propose to apply Echo State Networks (ESNs), which can be seen as an extension of standard linear regression with 1) a memory and 2) nonlinearity. We find that both features, memory and nonlinearity, independently as well as in conjunction, improve the prediction accuracy on simultaneous movements in two degrees of freedom (hand opening/closing as well as pronation/supination) recorded from four able-bodied participants using a low-cost myoelectric sensor. However, we also find that the model is still not sufficiently resistant to external disturbances such as electrode shift

    Feasibility of using combined EMG and kinematic signals for prosthesis control : A simulation study using a virtual reality environment

    Get PDF
    Acknowledgment This study was partly supported by a UK Medical Research Council Centenary Award to Keele University.Peer reviewedPublisher PD

    Emerging ExG-based NUI Inputs in Extended Realities : A Bottom-up Survey

    Get PDF
    Incremental and quantitative improvements of two-way interactions with extended realities (XR) are contributing toward a qualitative leap into a state of XR ecosystems being efficient, user-friendly, and widely adopted. However, there are multiple barriers on the way toward the omnipresence of XR; among them are the following: computational and power limitations of portable hardware, social acceptance of novel interaction protocols, and usability and efficiency of interfaces. In this article, we overview and analyse novel natural user interfaces based on sensing electrical bio-signals that can be leveraged to tackle the challenges of XR input interactions. Electroencephalography-based brain-machine interfaces that enable thought-only hands-free interaction, myoelectric input methods that track body gestures employing electromyography, and gaze-tracking electrooculography input interfaces are the examples of electrical bio-signal sensing technologies united under a collective concept of ExG. ExG signal acquisition modalities provide a way to interact with computing systems using natural intuitive actions enriching interactions with XR. This survey will provide a bottom-up overview starting from (i) underlying biological aspects and signal acquisition techniques, (ii) ExG hardware solutions, (iii) ExG-enabled applications, (iv) discussion on social acceptance of such applications and technologies, as well as (v) research challenges, application directions, and open problems; evidencing the benefits that ExG-based Natural User Interfaces inputs can introduceto the areaof XR.Peer reviewe

    Emerging ExG-based NUI Inputs in Extended Realities : A Bottom-up Survey

    Get PDF
    Incremental and quantitative improvements of two-way interactions with extended realities (XR) are contributing toward a qualitative leap into a state of XR ecosystems being efficient, user-friendly, and widely adopted. However, there are multiple barriers on the way toward the omnipresence of XR; among them are the following: computational and power limitations of portable hardware, social acceptance of novel interaction protocols, and usability and efficiency of interfaces. In this article, we overview and analyse novel natural user interfaces based on sensing electrical bio-signals that can be leveraged to tackle the challenges of XR input interactions. Electroencephalography-based brain-machine interfaces that enable thought-only hands-free interaction, myoelectric input methods that track body gestures employing electromyography, and gaze-tracking electrooculography input interfaces are the examples of electrical bio-signal sensing technologies united under a collective concept of ExG. ExG signal acquisition modalities provide a way to interact with computing systems using natural intuitive actions enriching interactions with XR. This survey will provide a bottom-up overview starting from (i) underlying biological aspects and signal acquisition techniques, (ii) ExG hardware solutions, (iii) ExG-enabled applications, (iv) discussion on social acceptance of such applications and technologies, as well as (v) research challenges, application directions, and open problems; evidencing the benefits that ExG-based Natural User Interfaces inputs can introduceto the areaof XR.Peer reviewe

    Altered resting state neuromotor connectivity in men with chronic prostatitis/chronic pelvic pain syndrome: A MAPP: Research Network Neuroimaging Study.

    Get PDF
    Brain network activity associated with altered motor control in individuals with chronic pain is not well understood. Chronic Prostatitis/Chronic Pelvic Pain Syndrome (CP/CPPS) is a debilitating condition in which previous studies have revealed altered resting pelvic floor muscle activity in men with CP/CPPS compared to healthy controls. We hypothesized that the brain networks controlling pelvic floor muscles would also show altered resting state function in men with CP/CPPS. Here we describe the results of the first test of this hypothesis focusing on the motor cortical regions, termed pelvic-motor, that can directly activate pelvic floor muscles. A group of men with CP/CPPS (N = 28), as well as group of age-matched healthy male controls (N = 27), had resting state functional magnetic resonance imaging scans as part of the Multidisciplinary Approach to the Study of Chronic Pelvic Pain (MAPP) Research Network study. Brain maps of the functional connectivity of pelvic-motor were compared between groups. A significant group difference was observed in the functional connectivity between pelvic-motor and the right posterior insula. The effect size of this group difference was among the largest effect sizes in functional connectivity between all pairs of 165 anatomically-defined subregions of the brain. Interestingly, many of the atlas region pairs with large effect sizes also involved other subregions of the insular cortices. We conclude that functional connectivity between motor cortex and the posterior insula may be among the most important markers of altered brain function in men with CP/CPPS, and may represent changes in the integration of viscerosensory and motor processing

    Co-adaptive myoelectric control for upper limb prostheses

    Full text link
    [ES] Mucha gente en el mundo se ve afectada por la pérdida de una extremidad (las predicciones estiman que en 2050 habrá más de 3 millones de personas afectadas únicamente en los Estados Unidos de América). A pesar de la continua mejora en las técnicas de amputación y la prostética, vivir sin una extremidad sigue limitando las actividades de los afectados en su vida diaria, provocando una disminución en su calidad de vida. En este trabajo nos centramos en los casos de amputaciones de extremidades superiores, entendiendo por ello la pérdida de cualquier parte del brazo o antebrazo. Esta tesis trata sobre el control mioeléctrico (potenciales eléctricos superficiales generados por la contracción de los músculos) de prótesis de extremidades superiores. Los estudios en este campo han crecido exponencialmente en las últimas décadas intentando reducir el hueco entre la parte investigadora más dinámica y propensa a los cambios e innovación (por ejemplo, usando técnicas como la inteligencia artificial) y la industria prostética, con una gran inercia y poco propensa a introducir cambios en sus controladores y dispositivos. El principal objetivo de esta tesis es desarrollar un nuevo controlador implementable basado en filtros adaptativos que supere los principales problemas del estado del arte. Desde el punto de vista teórico, podríamos considerar dos contribuciones principales. Primero, proponemos un nuevo sistema para modelar la relación entre los patrones de la señales mioélectricas y los movimientos deseados; este nuevo modelo tiene en cuenta a la hora de estimar la posición actual el valor de los estados pasados generando una nueva sinergia entre máquina y ser humano. En segundo lugar, introducimos un nuevo paradigma de entrenamiento más eficiente y personalizado autónomamente, el cual puede aplicarse no sólo a nuestro nuevo controlador, sino a otros regresores disponibles en la literatura. Como consecuencia de este nuevo protocolo, la estructura humano-máquina difiere con respecto del actual estado del arte en dos características: el proceso de aprendizaje del controlador y la estrategia para la generación de las señales de entrada. Como consecuencia directa de todo esto, el diseño de la fase experimental resulta mucho más complejo que con los controladores tradicionales. La dependencia de la posición actual de la prótesis con respecto a estados pasados fuerza a la realización de todos los experimentos de validación del nuevo controlador en tiempo real, algo costoso en recursos tanto humanos como de tiempo. Por lo tanto, una gran parte de esta tesis está dedicada al trabajo de campo necesario para validar el nuevo modelo y estrategia de entrenamiento. Como el objetivo final es proveer un nuevo controlador implementable, la última parte de la tesis está destinada a testear los métodos propuestos en casos reales, tanto en entornos simulados para validar su robustez ante rutinas diarias, como su uso en dispositivos prostéticos comerciales. Como conclusión, este trabajo propone un nuevo paradigma de control mioélectrico para prótesis que puede ser implementado en una prótesis real. Una vez se ha demostrado la viabilidad del sistema, la tesis propone futuras líneas de investigación, mostrando algunos resultados iniciales.[CA] Molta gent en el món es veu afectada per la pèrdua d'una extremitat (les prediccions estimen que en 2050 hi haurà més de 3 milions de persones afectades únicament als Estats Units d'Amèrica). Malgrat la contínua millora en les tècniques d'amputació i la prostètica, viure sense una extremitat continua limitant les activitats dels afectats en la seua vida diària, provocant una disminució en la seua qualitat de vida. En aquest treball ens centrem en els casos d'amputacions d'extremitats superiors, entenent per això la pèrdua de qualsevol part del braç o avantbraç. Aquesta tesi tracta sobre el control mioelèctric (potencials elèctrics superficials generats per la contracció dels músculs) de pròtesis d'extremitats superiors. Els estudis en aquest camp han crescut exponencialment en les últimes dècades intentant reduir el buit entre la part investigadora més dinàmica i propensa als canvis i innovació (per exemple, usant tècniques com la intel·ligència artificial) i la indústria prostètica, amb una gran inèrcia i poc propensa a introduir canvis en els seus controladors i dispositius. Aquesta tesi contribueix a la investigació des de diversos punts de vista. El principal objectiu és desenvolupar un nou controlador basat en filtres adaptatius que supere els principals problemes de l'estat de l'art. Des del punt de vista teòric, podríem considerar dues contribucions principals. Primer, proposem un nou sistema per a modelar la relació entre els patrons de la senyals mioelèctrics i els moviments desitjats; aquest nou model té en compte a l'hora d'estimar la posició actual el valor dels estats passats generant una nova sinergia entre màquina i ésser humà. En segon lloc, introduïm un nou paradigma d'entrenament més eficient i personalitzat autònomament, el qual pot aplicar-se no sols al nostre nou controlador, sinó a uns altres regresors disponibles en la literatura. Com a conseqüència d'aquest nou protocol, l'estructura humà-màquina difereix respecte a l'actual estat de l'art en dues característiques: el procés d'aprenentatge del controlador i l'estratègia per a la generació dels senyals d'entrada. Com a conseqüència directa de tot això, el disseny de la fase experimental resulta molt més complex que amb els controladors tradicionals. La dependència de la posició actual de la pròtesi respecte a estats passats força a la realització de tots els experiments de validació del nou controlador en temps real, una cosa costosa en recursos tant humans com de temps. Per tant, una gran part d'aquesta tesi està dedicada al treball de camp necessari per a validar el nou model i estratègia d'entrenament. Com l'objectiu final és proveir un nou controlador implementable, l'última part de la tesi està destinada a testar els mètodes proposats en casos reals, tant en entorns simulats per a validar la seua robustesa davant rutines diàries, com el seu ús en dispositius prostètics comercials. Com a conclusió, aquest treball proposa un nou paradigma de control mioelèctric per a pròtesi que pot ser implementat en una pròtesi real. Una vegada s'ha demostrat la viabilitat del sistema, la tesi proposa futures línies d'investigació, mostrant alguns resultats inicials.[EN] Many people in the world suffer from the loss of a limb (predictions estimate more than 3 million people by 2050 only in the USA). In spite of the continuous improvement in the amputation rehabilitation and prosthetic restoration, living without a limb keeps limiting the daily life activities leading to a lower quality of life. In this work, we focus in the upper limb amputation case, i.e., the removal of any part of the arm or forearm. This thesis is about upper limb prosthesis control using electromyographic signals (the superficial electric potentials generated during muscle contractions). Studies in this field have grown exponentially in the past decades trying to reduce the gap between a fast growing prosthetic research field, with the introduction of machine learning, and a slower prosthetic industry and limited manufacturing innovation. This thesis contributes to the field from different perspectives. The main goal is to provide and implementable new controller based on adaptive filtering that overcomes the most common state of the art concerns. From the theoretical point of view, there are two main contributions. First, we propose a new system to model the relationship between electromyographic signals and the desired prosthesis movements; this new model takes into account previous states for the estimation of the current position generating a new human-machine synergy. Second, we introduce a new and more efficient autonomously personalized training paradigm, which can benefit not only to our new proposed controller but also other state of the art regressors. As a consequence of this new protocol, the human-machine structure differs with respect to current state of the art in two features: the controller learning process and the input signal generation strategy. As a direct aftereffect of all of this, the experimental phase design results more complex than with traditional controllers. The current state dependency on past states forces the experimentation to be in real time, a very high demanding task in human and time resources. Therefore, a major part of this thesis is the associated fieldwork needed to validate the new model and training strategy. Since the final goal is to provide an implementable new controller, the last part of the thesis is devoted to test the proposed methods in real cases, not only analyzing the robustness and reliability of the controller in real life situations but in real prosthetic devices. As a conclusion, this work provides a new paradigm for the myoelectric prosthetic control that can be implemented in a real device. Once the thesis has proven the system's viability, future work should continue with the development of a physical device where all these ideas are deployed and used by final patients in a daily basis.The work of Carles Igual Bañó to carry out this research and elaborate this dissertation has been supported by the Ministerio de Educación, Cultura y Deporte under the FPU Grant FPU15/02870. One visiting research fellowships (EST18/00544) was also funded by the Ministerio de Educación, Cultura y Deporte of Spain.Igual Bañó, C. (2021). Co-adaptive myoelectric control for upper limb prostheses [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/168192TESI

    EEG-based emotion classification using spiking neural networks

    Get PDF
    A novel method of using the spiking neural networks (SNNs) and the electroencephalograph (EEG) processing techniques to recognize emotion states is proposed in this paper. Three algorithms including discrete wavelet transform (DWT), variance and fast Fourier transform (FFT) are employed to extract the EEG signals, which are further taken by the SNN for the emotion classification. Two datasets, i.e., DEAP and SEED, are used to validate the proposed method. For the former dataset, the emotional states include arousal, valence, dominance and liking where each state is denoted as either high or low status. For the latter dataset, the emotional states are divided into three categories (negative, positive and neutral). Experimental results show that by using the variance data processing technique and SNN, the emotion states of arousal, valence, dominance and liking can be classified with accuracies of 74%, 78%, 80% and 86.27% for the DEAP dataset, and an overall accuracy is 96.67% for the SEED dataset, which outperform the FFT and DWT processing methods. In the meantime, this work achieves a better emotion classification performance than the benchmarking approaches, and also demonstrates the advantages of using SNN for the emotion state classifications
    corecore