EMI Susceptibility Issue in Analog Front-End for Sensor Applications

The susceptibility to electromagnetic interferences of the analog circuits used in the sensor readout front-end is discussed. Analog circuits still play indeed a crucial role in sensor signal acquisition due to the analog nature of sensory signals. The effect of electromagnetic interferences has been simulated and measured in many commercial and integrated analog circuits; the main cause of the electromagnetic susceptibility is investigated and the guidelines to design high EMI immunity circuits are provided

Digital Suppression of EMI-Induced Errors in a Baseband Acquisition Front-End including Off-the-Shelf, EMI-Sensitive Operational Amplifiers

In this paper, the susceptibility to Electromagnetic Interference (EMI) of an analog signal acquisition front-end (AFE) due to EMI distortion in opamp-based pre-conditioning amplifiers is addressed. More specifically, the possibility to correct EMI-induced errors in the digital domain by post-processing the acquired digital waveforms is discussed and experimentally demonstrated for the first time with reference to an AFE based on EMI-sensitive, off-the-shelf operational amplifiers mounted on a specific EMI test PCB. Extensive experimental characterization in the presence of continuous wave and amplitude modulated EMI reveals the superior immunity to EMI of the proposed AFE and the robustness of the approach

Electromagnetic Interference and Compatibility

Recent progress in the fields of Electrical and Electronic Engineering has created new application scenarios and new Electromagnetic Compatibility (EMC) challenges, along with novel tools and methodologies to address them. This volume, which collects the contributions published in the “Electromagnetic Interference and Compatibility” Special Issue of MDPI Electronics, provides a vivid picture of current research trends and new developments in the rapidly evolving, broad area of EMC, including contributions on EMC issues in digital communications, power electronics, and analog integrated circuits and sensors, along with signal and power integrity and electromagnetic interference (EMI) suppression properties of materials

Design and Analysis of Subsystems for a CubeSat Mission

The project addresses the science payload and performs thermal and spacecraft charging analysis of a three-unit CubeSat under design. An infrared spectrometer and a magnetometer are selected for the circular 680-km polar CubeSat mission. Thermal analysis using SolidWorks provides the CubeSat temperature distribution under anticipated ambient and internal heat fluxes. To achieve the design temperatures thermal control is recommended with coatings and internal insulation. Charging analysis is performed using the Spacecraft Plasma Interaction System (SPIS) software under anticipated ambient plasma conditions and shows no adverse impacts. Electromagnetic interference due to the onboard propulsion solenoids is assessed using COMSOL. The analysis guides the design of a 10-cm magnetometer boom

Design Techniques of Highly Integrated Hybrid-Switched-Capacitor-Resonant Power Converters for LED Lighting Applications

The Light-emitting diodes (LEDs) are rapidly emerging as the dominant light source given their high luminous efficacy, long lift span, and thanks to the newly enacted efficiency standards in favor of the more environmentally-friendly LED technology. The LED lighting market is expected to reach USD 105.66 billion by 2025. As such, the lighting industry requires LED drivers, which essentially are power converters, with high efficiency, wide input/output range, low cost, small form factor, and great performance in power factor, and luminance flicker. These requirements raise new challenges beyond the traditional power converter topologies. On the other hand, the development and improvement of new device technologies such as printed thin-film capacitors and integrated high voltage/power devices opens up many new opportunities for mitigating such challenges using innovative circuit design techniques and solutions. Almost all electric products needs certain power delivery, regulation or conversion circuits to meet the optimized operation conditions. Designing a high performance power converter is a real challenge given the market’s increasing requirements on energy efficiency, size, cost, form factor, EMI performance, human health impact, and so on. The design of a LED driver system covers from high voltage AC/DC and DC/DC power converters, to high frequency low voltage digital controllers, to power factor correction (PFC) and EMI filtering techniques, and to safety solutions such as galvanic isolation. In this thesis, we study design challenges and present corresponding solutions to realize highly integrated and high performance LED drivers combining switched-capacitor and resonant converters, applying re-configurable multi-level circuit topology, utilizing sigma delta modulation, and exploring capacitive galvanic isolation. A hybrid switched-capacitor-resonant (HSCR) LED driver based on a stackable switched-capacitor (SC) converter IC rated for 15 to 20 W applications. Bulky transformers have been replaced with a SC ladder to perform high-efficiency voltage step-down conversion; an L-C resonant output network provides almost lossless current regulation and demonstrates the potential of capacitive galvanic isolation. The integrated SC modules can be stacked in the voltage domain to handle a large range of input voltage ranges that largely exceed the voltage limitation of the medium-voltage-rated 120 V silicon technology. The LED driver demonstrates > 91% efficiency over a rectified input DC voltage range from 160 VDC to 180 VDC with two stacked ICs; using a stack of four ICs > 89.6% efficiency is demonstrated over an input range from 320 VDC to 360 VDC . The LED driver can dim its output power to around 10% of the rated power while maintaining >70% efficiency with a PWM controlled clock gating circuit. Next, the design of AC main rectifier and inverter front end with sigma delta modulation is described. The proposed circuits features a pair of sigma delta controlled multilevel converters. The first is a multilevel rectifier responsible for PFC and dimming. The second is a bidirectional multilevel inverter used to cancel AC power ripple from the DC bus. The system also contains an output stage that powers the LEDs with DC and provides for galvanic isolation. Its functional performance indicates that integrated multilevel converters are a viable topology for lighting and other similar applications

A double-sided, shield-less stave prototype for the ATLAS upgrade strip tracker for the high luminosity LHC

A detailed description of the integration structures for the barrel region of the silicon strips tracker of the ATLAS Phase-II upgrade for the upgrade of the Large Hadron Collider, the so-called High Luminosity LHC (HL-LHC), is presented. This paper focuses on one of the latest demonstrator prototypes recently assembled, with numerous unique features. It consists of a shortened, shield-less, and double sided stave, with two candidate power distributions implemented. Thermal and electrical performances of the prototype are presented, as well as a description of the assembly procedures and tools

Characterization and Modeling of High Power Microwave Effects in CMOS Microelectronics

The intentional use of high power microwave (HPM) signals to disrupt microelectronic systems is a substantial threat to vital infrastructure. Conventional methods to assess HPM threats involve empirical testing of electronic equipment, which provides no insight into fundamental mechanisms of HPM induced upset. The work presented in this dissertation is part of a broad effort to develop more effective means for HPM threat assessment. Comprehensive experimental evaluation of CMOS digital electronics was performed to provide critical information of the elementary mechanisms that govern the dynamics of HPM effects. Results show that electrostatic discharge (ESD) protection devices play a significant role in the behavior of circuits irradiated by HPM pulses. The PN junctions of the ESD protection devices distort HPM waveforms producing DC voltages at the input of the core logic elements, which produces output bit errors and abnormal circuit power dissipation. The dynamic capacitance of these devices combines with linear parasitic elements to create resonant structures that produce nonlinear circuit dynamics such as spurious oscillations. The insight into the fundamental mechanisms this research has revealed will contribute substantially to the broader effort aimed at identifying and mitigating susceptibilities in critical systems. Also presented in this work is a modeling technique based on scalable analytical circuit models that accounts for the non-quasi-static behavior of the ESD protection PN junctions. The results of circuit simulations employing these device models are in excellent agreement with experimental measurements, and are capable of predicting the threshold of effect for HPM driven non-linear circuit dynamics. For the first time, a deterministic method of evaluating HPM effects based on physical, scalable device parameters has been demonstrated. The modeling presented in this dissertation can be easily integrated into design cycles and will greatly aid the development of electronic systems with improved HPM immunity

Electromagnetic Interference (EMI) Resisting Analog Integrated Circuit Design Tutorial

This work introduces fundamental knowledge of EMI, and presents three basic features correlated to EMI susceptibility: nonlinear distortion, asymmetric slew rate (SR) and parasitic capacitance. Different existing EMI-resisting techniques are analyzed and compared to each other in terms of EMI-Induced input offset voltage and other important specifications such as current consumption. In this work, EMI-robust analog circuits are proposed, of which the architecture is based on source-buffered differential pair in the previous publications. The EMI performance of the proposed topologies has been verified within a test IC which was fabricated in NCSU 0.5um CMOS technology. Experimental results are presented when an EMI disturbance signal of 400mV and 800mV amplitude was injected at the input terminals, and compared with a conventional and an existing topology. The tested maximal EMI-induced input offset voltage corresponds to -222mV for the new structure, which is compared to -712mV for the conventional one and -368mV for the one using existing source-buffered technique in literature. Furthermore the overall performances of the circuits such as current consumption or input referred noise are also provided with the corresponding simulation results

Optoelectronic developments for remote-handled maintenance tasks in ITER

Remotely handled maintenance tools operated in the future International Thermonuclear Experimental Reactor (ITER) will face a harsh radiation environment, with total dose level requirements of several MGy. Optical fiber data communication has been considered as an alternative to conventional electronic transmission between the control room and remote handled maintenance equipment, mainly owing to its insentivity to electro-magnetic interference and to its wavelength encoded multiplexing capabilities. In this paper we summarise main results obtained at SCK•CEN over the past years towards the development of radiation tolerant fibre-optic communication links and report on the radiation tolerance of various individual optical components such as optical fibres, laser diodes and photodetectors, as well as their associated electronic driver circuits

Hybrid receiver study

The results are presented of a 4 month study to design a hybrid analog/digital receiver for outer planet mission probe communication links. The scope of this study includes functional design of the receiver; comparisons between analog and digital processing; hardware tradeoffs for key components including frequency generators, A/D converters, and digital processors; development and simulation of the processing algorithms for acquisition, tracking, and demodulation; and detailed design of the receiver in order to determine its size, weight, power, reliability, and radiation hardness. In addition, an evaluation was made of the receiver's capabilities to perform accurate measurement of signal strength and frequency for radio science missions