Domino Gate with Modified Voltage Keeper

Abstract Using both the modified supply voltage and body voltage, an optimized keeper technique is presented in this paper to tradeoff the performance of domino OR gates. The simulation results show that the novel technique can highly improve power/speed efficiency and robustness to noise. In addition, because of employment of body biased voltage, the optimized keeper technique enables to minimize effect of the strong process parameter variation

Stack Contention-alleviated Precharge Keeper for Pseudo Domino Logic

The dynamic circuits are supposed to offer superior speed and low power dissipation over static CMOS circuits. The domino logic circuits are used for high system performance but suffer from the precharge pulse degradation. This article provides different design topologies on the domino circuits to overcome the charge sharing and charge leakage with reference to the power dissipation and delay. The precharge keeper circuit has been proposed such that the keeper transistors also work as the precharge transistors to realize multiple output function. The performance improvement of the circuit\u27s analysis have been done for adders and logic gates using HSPICE tool. The proposed keeper techniques reveal lower power dissipation and lesser delay over the standard keeper circuit with less transistor count for different process variation

Stack Contention-alleviated Precharge Keeper for Pseudo Domino Logic

The dynamic circuits are supposed to offer superior speed and low power dissipation over static CMOS circuits. The domino logic circuits are used for high system performance but suffer from the precharge pulse degradation. This article provides different design topologies on the domino circuits to overcome the charge sharing and charge leakage with reference to the power dissipation and delay. The precharge keeper circuit has been proposed such that the keeper transistors also work as the precharge transistors to realize multiple output function. The performance improvement of the circuit’s analysis have been done for adders and logic gates using HSPICE tool. The proposed keeper techniques reveal lower power dissipation and lesser delay over the standard keeper circuit with less transistor count for different process variation

Ultra low power high speed domino logic circuit by using FinFET technology

Scaling of the MOSFET face greater challenge by extreme power density due to leakage current in ultra deep sub-micron (UDSM) technology. To overcome from this situation double gate device like FinFET is used which has excellent control over the thin silicon fins with two electrically coupled gate, which mitigate shorter channel effect and exponentially reduces the leakage current. In this research paper utilize the property of FinFET in domino logic, for high speed operation and reduction of power consumption in wide fan-in OR gate. Proposed circuit is simulated in FinFET technology by BISM4 model using HSPICE at 32nm process technology at 250C with CL=1pF at 100MHz frequency. For 8 and 16 input OR gate we save average power 11.5%,11.39% in SFLD, 22.97%, 18.12% in HSD, 30.90%, 34.57% in CKD in SG mode and for LP mode 11.26%, 15.78% in SFLD, 19.74%, 17.94% in HSD, 45.23%, 34.69% in CKD respectivel

A Reconfigurable Digital Multiplier and 4:2 Compressor Cells Design

With the continually growing use of portable computing devices and increasingly complex software applications, there is a constant push for low power high speed circuitry to support this technology. Because of the high usage and large complex circuitry required to carry out arithmetic operations used in applications such as digital signal processing, there has been a great focus on increasing the efficiency of computer arithmetic circuitry. A key player in the realm of computer arithmetic is the digital multiplier and because of its size and power consumption, it has moved to the forefront of today\u27s research. A digital reconfigurable multiplier architecture will be introduced. Regulated by a 2-bit control signal, the multiplier is capable of double and single precision multiplication, as well as fault tolerant and dual throughput single precision execution. The architecture proposed in this thesis is centered on a recursive multiplication algorithm, where a large multiplication is carried out using recursions of simpler submultiplier modules. Within each sub-multiplier module, instead of carry save adder arrays, 4:2 compressor rows are utilized for partial product reduction, which present greater efficiency, thus result in lower delay and power consumption of the whole multiplier. In addition, a study of various digital logic circuit styles are initially presented, and then three different designs of 4:2 compressor in Domino Logic are presented and simulation results confirm the property of proposed design in terms of delay, power consumption and operation frequenc

Dynamic gates with hysteresis and configurable noise tolerance

Journal ArticleDynamic logic can provide significant performance and power benefit compared to implementations using static gates. Unfortunately dynamic gates have traditionally suffered from low noise margins, which limits their reliability. A new logic family, called complementary dynamic logic (CDL), is presented. CDL replaces the standard keeper logic with a dual dynamic keeper gate that is applicable to all dynamic gate structures. CDL provides dynamic gates with two novel characteristics: hysteresis and arbitrarily configurable noise margins. However, these two benefits come at the cost of reducing the gain and increasing the energy of the dynamic gate. This paper compares the noise, energy, performance, gain, and total transistor width tradeoffs of CDL and three other logic families applied to a 65nm cell library consisting of 23 functions. The results show that the performance advantages of dynamic domino gates can be maintained while providing significantly enhanced noise margins using CDL structures

Improved Techniques for High Performance Noise-Tolerant Domino CMOS Logic Circuits

Domino CMOS logic circuit family finds a wide variety of applications in microprocessors, digital signal processors, and dynamic memory due to their high speed and low device count. However, there are inevitable problems that degrade the noise immunity of this family; they are the inevitable leakage current and the charge sharing. Added to the drawbacks is the relatively large power consumption, especially if compared to the static complementary CMOS logic family. To make the matter worse, these drawbacks are more tactile with the scaling of CMOS technology. In my thesis, An introduction to domino logic, The impact of CMOS technology scaling on the performance of domino CMOS logic, Three Phase Domino Logic Circuit, High-performance noise-tolerant circuit techniques for CMOS dynamic logic and other Domino logic techniques are studied and corresponding Domino logic techniques have been designed and simulated. Specifically, the need to decrease the dynamic power consumption forces the designer to use a lower power-supply voltage. This in turn necessitates the reduction of threshold voltage to maintain the performance with the associated increase in sub threshold leakage current. So, a properly sized PMOS keeper must be used to compensate for this leakage. It will be found that the speed, which is the major advantage of domino logic compared to other logic styles, will degrade with CMOS technology scaling due to the contention current of the keeper. To assure high performance in noise tolerant techniques, the inevitable effects like leakage currents and charge distribution have to be minimized. In this thesis few modifications have also been made to already existing domino techniques and different Domino logic circuits are simulated in both Cadence virtuoso (implemented using GPDK090- library of 90nm technology) and Mentor graphics (implemented at different technologies like Tsmc 035.mod, Tsmc 025.mod, Tsmc 018.mod) environments. The performance parameters are also compared with other standard architectures of Domino logic

DESIGN OF AN ENERGY-EFFICIENT CONSTANT DELAY LOGIC FOR LOW POWER APPLICATIONS

An Energy Efficient Constant Delay Logic (EE-CDL) is proposed in this thesis to reduce the power consumption for low power applications. The EE-CDL is well suited to arithmetic circuits where the critical path is made of a large cascade of inverting gates. It has a unique characteristic where the output is pre-evaluated before the inputs from the preceding stage are ready. The proposed logic style requires low power when compared to the existing CDL. The proposed circuit is designed and using 90-nm, CMOS technology file with supply voltage 1.2V. An inverter is designed using energy efficient feedthrough logic and simulated in MicroWind. The simulation result shows that the proposed logic reduces the power consumption by 88%, 83% and 56% when compared with FTL, Low Power FTL (LP-FTL) and Constant Delay Logic (CDL) respectively. The problem of requirement of inverter as in dynamic logic is completely eliminated in the proposed logic

Design and Implementation of Novel High Performance Domino Logic

This dissertation presents design and implementation of novel high performance domino logic techniques with increased noise robustness and reduced leakages. The speed and overhead area became the primary parameters of choice for fabrication industry that led to invention of clocked logic styles named as Dynamic logic and Domino logic families. Most importantly, power consumption, noise immunity, speed of operation, area and cost are the predominant parameters for designing any kind of digital logic circuit technique with effective trade-off amongst these parameters depending on the situation and application of design. Because of its high speed and low overhead area domino logic became process of choice for designing of high speed application circuits. The concerning issues are large power consumption and high sensitivity towards noise. Hence, there is a need for designing new domino methodology to meet the requirements by overcoming above mentioned drawbacks which led to ample opportunities for diversified research in this field. Therefore, the outcome of research must be able to handle the primary design parameters efficiently. Besides this, the designed circuit must exhibit high degree of robustness towards noise.In this thesis, few domino logic circuit techniques are proposed to deal with noise and sub-threshold leakages. Effect of signal integrity issues on domino logic techniques is studied. Furthermore, having been subjected to process corner analysis and noise analysis, the overall performance of proposed domino techniques is found to be enhanced despite a few limitations that are mentioned in this work. Besides this, lector based domino and dynamic node stabilized techniques are also proposed and are investigated thoroughly. Simulations show that proposed circuits are showing superior performance. In addition to this, domino based Schmitt triggers with various hysteresis phenomena are designed and simulated. Pre-layout and post-layout simulation results are compared for proposed Schmitt trigger. Simulations reveal that proposed Schmitt trigger techniques are more noise tolerant than CMOS counterparts. Moreover, a test chip for domino based Schmitt trigger is done in UMC 180 nm technology for fabrication