Improved structured least squares for the application of unitary ESPRIT to cross arrays

A key problem in high-resolution multidimensional parameter estimation via unitary ESPRIT is to jointly solve a set of invariance equations by means of least-squares minimization. It has been shown previously that existing least-squares techniques fail when applied to the category of cross arrays, which consist of perpendicular uniform linear arrays crossing at the center of the array. Cross array geometries are of special interest because they provide a larger aperture and, hence, better resolution for a given number of array elements than other multidimensional uniform array geometries. This letter proposes an improved structured least-squares method that enables successful application of unitary ESPRIT to cross arrays. Results of simulated direction-of-arrival estimation experiments using a three-dimensional cross array indicate that considerable performance improvements can be achieved if the new method is used

Analysis of the sum rate for massive MIMO using 10 GHz measurements

Orientador: Gustavo FraidenraichTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de ComputaçãoResumo: Este trabalho apresenta um conjunto de contribuições para caracterização e modelagem de canais reais de rádio abordando aspectos relacionados com as condições favoráveis de propagação para sistemas massive MIMO. Discutiremos como caracterizar canais de rádio em um ambiente real, processamento de dados e análise das condições favoráveis de propagação. Em uma segunda parte, focamos na determinação teórica de alguns aspectos da tecnologia de massive MIMO utilizando propriedades de distribuições matriciais Wishart. Inicialmente, apresentamos uma contribuição sobre a aplicação do algoritmo ESPRIT, para estimar parâmetros de um conjunto de dados multidimensional. Obtivemos dados por varredura em frequência de um Analisador Vetorial de Rede e os adaptamos para o algoritmo ESPRIT. Mostramos como remover a influência do ganho de padrão de antenas e como utilizar um gerador de modelo de canal baseado nas medidas reais de canal de rádio. As medidas foram feitas na frequência de 10.1 GHz com largura de faixa de 500 MHz. Utilizando um gerador de modelo de canal, fomos além do universo das simulações por distribuições Gaussianas. Introduzimos o conceito de propagação favorável e analisamos condições de linha-de-visada usando arranjos lineares uniformes e arranjos retangulares uniformes de antena. Como novidade da pesquisa, mostramos os benefícios de explorar um número extra de graus de liberdade devido à escolha dos formatos de arranjo de antenas e ao aumento do número de elementos. Esta propriedade é observada ao analisarmos a distribuição dos autovalores de matrizes Gramianas. Em seguida, estendemos o mesmo raciocínio para as matrizes de canal geradas a partir de informações reais e verificamos se as propriedades ainda permaneceriam válidas. Na segunda parte deste trabalho, incluímos mais de uma antena no terminal móvel e calculamos a probabilidade de indisponibilidade para várias configurações de antenas e número arbitrário de usuários. Esboçamos inicialmente a formulação para a informação mútua e, em seguida, calculamos os resultados exatos em uma situação com dois usuários e duas antenas, tanto na estação base (EB) como nos terminais de usuário(TU). Visto que as formulações para a derivação exata dos casos com mais antenas e mais usuários mostrou-se muito intrincada, propusemos uma aproximação Gaussiana para simplificar o problema. Esta aproximação foi validada por simulações Monte Carlo para diferentes relações sinal/ruídoAbstract: This thesis presents a set of contributions for channel modeling and characterization of real radio channels delineating aspects related with the favorable propagation for massive MIMO systems. We will discuss about how to proceed for characterizing radio channels in an real environment , data processing, and analysis of favorable conditions. In a second part, we focused on determination of some theoretical aspects of the Massive MIMO technology using properties of Wishart distribution matrices. We initially present a contribution on the application of ESPRIT algorithm for estimating a multidimensional set of measured data. We have obtained data by frequency sweep carried out by a vector network analyzer(VNA) and adapted it to fit in the ESPRIT algorithm. We show how to remove antenna pattern gain using virtual antenna arrays and how to use a channel model generator based on radio channel measurements of real environments. The measurements were conducted at the frequency of 10.1 GHz and 500 MHz bandwidth. By using a channel model generator, we have explored beyond the simulation of Gaussian Distributions. We will introduce the concept of favorable propagation and analyze the line-of-sight conditions using ULA and URA array shapes. As a research novelty, we will show the benefits of exploiting an extra degree of freedom due to the choice of the antenna shapes and amount of antenna elements. We observe these properties through the distribution of the Gramian Matrices. Next, we extend the same rationale to channel matrices generated from real channels and we verify that the properties are still valid. In a second part of the research work, we included more than one antenna in the mobile terminals and calculated the outage probability for several antenna configurations and arbitrary number users. We introduce a formulation for mutual information and then we calculate exact results in a case with two users with two antennas in both Base Station (BS) and User Terminals (UT). Since the formulations to the exact derivation for cases with more antennas and users seems to be intricate, we propose a Gaussian approximation solution to simplify the problem. We validated this approximation with Monte Carlo simulations for different signal-to-noise ratiosDoutoradoTelecomunicações e TelemáticaDoutor em Engenharia Elétrica248416/2013-8CNPQCAPE

Abstracts on Radio Direction Finding (1899 - 1995)

The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography). Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM. The contents of these files are: 1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format]; 2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format]; 3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion

Angular dispersion of radio waves in mobile channels

Multi-antenna techniques are an important solution for significantly increasing the bandwidth efficiency of mobile wireless data transmission systems. Effective and reliable design of these multi-antenna systems requires thorough knowledge of radiowave propagation in the urban environment. The aim of the work presented in this thesis is to obtain a better physical understanding of radiowave propagation in mobile radio channels in order to provide a basis for the improvement of radiowave propagation prediction techniques for urban environments using knowledge from 3-D propagation experiments and simulations combined with space-wave modelling. In particular, the work focusses on: the development of an advanced 3-D mobile channel sounding system, obtaining propagation measurement data from mobile radio propagation experiments, the analysis of measured data and the modelling of angular dispersive scattering effects for the improvement of deterministic propagation prediction models. The first part of the study presents the design, implementation and verification of a wideband high-resolution measurement system for the characterisation of angular dispersion in mobile channels. The system uses complex impulse response data obtained from a novel 3-D tilted-cross switched antenna array as input to an improved version of 3-D Unitary ESPRIT. It is capable of characterising the delay and angular properties of physically-nonstationary radio channels at moderate urban speeds with high resolution in both azimuth and elevation. For the first time, omnidirectional video data that were captured during the measurements are used in combination with the measurement results to accurately identify and relate the received radio waves directly to the actual environment while moving through it. The second part of the study presents the results of experiments in which the highresolution measurement system, described in the first part, is used in several mobile outdoor experiments in different scenarios. The objective of these measurements was to gain more knowledge in order to improve the understanding of radiowave propagation. From these results the dispersive effects in the angular domain, caused by rough building surfaces and other irregular structures was paid particular attention. These effects not only influence the total amount of received power in dense urban environments, but can also have a large impact on the performance and deployment of multi-antenna systems. To improve the data representation and support further data analysis a hierarchical clustering method is presented that can successfully identify clusters of multipath signal components in multidimensional data. By using the data obtained from an omnidirectional video camera the clusters can be related directly to the environment and the scattering effects of specific objects can be isolated. These results are important in order to improve and calibrate deterministic propagation models. In the third part of the study a new method is presented to account for the angular dispersion caused by irregular surfaces in ray-tracing based propagation prediction models. The method is based on assigning an effective roughness to specific surfaces. Unlike the conventional reflection reduction factor for Gaussian surfaces, that only reduces the ray power, the new method also distributes power in the angular domain. The results of clustered measurement data are used to calibrated the model and show that this leads to improved channel representations that are better matched to the real-world channel behavior

Array interpolation methods with applications in wireless sensor networks and global positioning systems

Dissertação (mestrado)—Universidade de Brasília, 2013.Nas últimas três décadas o estudo de técnicas de processamento de sinais em arranjos de sensores tem recebido grande atenção. Uma grande quantidade de técnicas foi desenvolvida com diversas finalidades como a estimação da direção de chegada, a filtragem ou separação espacial dos sinais recebidos, a estimação do atraso de propagação, a estimação da frequência Doppler e a pré-codificação de sinais na transmissão para maximização da potência recebida por outro arranjo. Técnicas para estimação da direção de chegada são de particular interesse para sistemas de posicionamento baseado em ondas de rádio, como os sistemas de posicionamento global e para o mapeamento de sensores em redes de sensores. Uma particularidade dessas aplicações é a necessidade de uma estimação em tempo real ou computacionalmente eficiente. Técnicas de estimação da direção de chegada que atendem esses requisitos requerem uma estrutura muito específica do arranjo de antenas que, em geral, não pode ser obtida em implementações reais. Nesse trabalho é apresentado um conjunto de técnicas que permitem a interpolação de sinais recebidos em arranjos de geometria arbitrária para arranjos de geometria específica, de forma eficiente e robusta, para possibilitar a aplicação de técnicas eficientes para estimação da direção de chegada em arranjos de geometria arbitrária. Como aplicações das técnicas propostas são apresentados o mapeamento preciso em redes de sensores e posicionamento preciso em receptores de sistemas de posicionamento global. _______________________________________________________________________________________ ABSTRACTIn the last three decades the study of antenna array signal processing techniques has received significant attention. A large number of techniques have been developed with different purposes such as the estimation of the direction of arrival (DOA), filtering or spatial separation of received signals, estimation of time delay of arrival (TDOA), Doppler frequency estimation and precoding of transmitted signals to maximize the power received by a different array. DOA estimation techniques are of particular interest for positioning systems based on radio waves such as the global positioning system (GPS) and for sensor mapping in wireless sensor networks (WSNs). These applications have the particular requirement of demanding the estimations to be made in real time or with reduced computational complexity. DOA estimation techniques that fulfill these requirements demand very specific antenna array structures that cannot, in general, be obtained in real implementations. In this work a set of techniques is presented that allows the interpolation of signals received in arrays of arbitrary geometry into arrays of specific geometry efficiently and robustly to allow the application of efficient DOA estimation techniques in arrays of arbitrary geometry. As an application of the proposed techniques precise mapping for WSNs and precise positioning for GPS receivers is presented