Hardware synthesis from high-level scenario specifications

PhD ThesisThe behaviour of many systems can be partitioned into scenarios. These facilitate engineers’ understanding of the specifications, and can be composed into efficient implementations via a form of high-level synthesis. In this work, we focus on highly concurrent systems, whose scenarios are typically described using concurrency models such as partial orders, Petri nets and data-flow structures. In this thesis, we study different aspects of hardware synthesis from high-level scenario specifications. We propose new formal models to simplify the specification of concurrent systems, and algorithms for hardware synthesis and verification of the scenario-based models of such systems. We also propose solutions for mapping scenariobased systems on silicon and evaluate their efficiency. Our experiments show that the proposed approaches improve the design of concurrent systems. The new formalisms can break down complex specifications into significantly simpler scenarios automatically, and can be used to fully model the dataflow of operations of reconfigurable event-driven systems. The proposed heuristics for mapping the scenarios of a system to a digital circuit supports encoding constraints, unlike existing methods, and can cope with specifications comprising hundreds of scenarios at the cost of only 5% of area overhead compared to exact algorithms. These experiments are driven by three case studies: (1) hardware synthesis of control architectures, e.g. microprocessor control units; (2) acceleration of the ordinal pattern encoding, i.e. an algorithm for detecting repetitive patterns within data streams; (3) and acceleration of computational drug discovery, i.e. computation of shortest paths in large protein-interaction networks. Our findings are employed to design two prototypes, which have a practical value for the considered case studies. The ordinal pattern encoding accelerator is asynchronous, highly resilient to unstable voltage supply, and designed to perform a range of computations via runtime reconfiguration. The drug discovery accelerator is synchronous, and up to three orders of magnitude faster than conventional software implementations

Interpreted graph models

A model class called an Interpreted Graph Model (IGM) is defined. This class includes a large number of graph-based models that are used in asynchronous circuit design and other applications of concurrecy. The defining characteristic of this model class is an underlying static graph-like structure where behavioural semantics are attached using additional entities, such as tokens or node/arc states. The similarities in notation and expressive power allow a number of operations on these formalisms, such as visualisation, interactive simulation, serialisation, schematic entry and model conversion to be generalised. A software framework called Workcraft was developed to take advantage of these properties of IGMs. Workcraft provides an environment for rapid prototyping of graph-like models and related tools. It provides a large set of standardised functions that considerably facilitate the task of providing tool support for any IGM. The concept of Interpreted Graph Models is the result of research on methods of application of lower level models, such as Petri nets, as a back-end for simulation and verification of higher level models that are more easily manipulated. The goal is to achieve a high degree of automation of this process. In particular, a method for verification of speed-independence of asynchronous circuits is presented. Using this method, the circuit is specified as a gate netlist and its environment is specified as a Signal Transition Graph. The circuit is then automatically translated into a behaviourally equivalent Petri net model. This model is then composed with the specification of the environment. A number of important properties can be established on this compound model, such as the absence of deadlocks and hazards. If a trace is found that violates the required property, it is automatically interpreted in terms of switching of the gates in the original gate-level circuit specification and may be presented visually to the circuit designer. A similar technique is also used for the verification of a model called Static Data Flow Structure (SDFS). This high level model describes the behaviour of an asynchronous data path. SDFS is particularly interesting because it models complex behaviours such as preemption, early evaluation and speculation. Preemption is a technique which allows to destroy data objects in a computation pipeline if the result of computation is no longer needed, reducing the power consumption. Early evaluation allows a circuit to compute the output using a subset of its inputs and preempting the inputs which are not needed. In speculation, all conflicting branches of computation run concurrently without waiting for the selecting condition; once the selecting condition is computed the unneeded branches are preempted. The automated Petri net based verification technique is especially useful in this case because of the complex nature of these features. As a result of this work, a number of cases are presented where the concept of IGMs and the Workcraft tool were instrumental. These include the design of two different types of arbiter circuits, the design and debugging of the SDFS model, synthesis of asynchronous circuits from the Conditional Partial Order Graph model and the modification of the workflow of Balsa asynchronous circuit synthesis system.EThOS - Electronic Theses Online ServiceEPSRCGBUnited Kingdo

Compositional approach to design of digital circuits

PhD ThesisIn this work we explore compositional methods for design of digital circuits with the aim of improving existing methodoligies for desigh reuse. We address compositionality techniques looking from both structural and behavioural perspectives. First we consider the existing method of handshake circuit optimisation via control path resynthesis using Petri nets, an approach using structural composition. In that approach labelled Petri net parallel composition plays an important role and we introduce an improvement to the parallel composition algorithm, reducing the number of redundant places in the resulting Petri net representations. The proposed algorithm applies to labelled Petri nets in general and can be applied outside of the handshake circuit optimisation use case. Next we look at the conditional partial order graph (CPOG) formalism, an approach that allows for a convenient representation of systems consisting of multiple alternative system behaviours, a phenomenon we call behavioural composition. We generalise the notion of CPOG and identify an algebraic structure on a more general notion of parameterised graph. This allows us to do equivalence-preserving manipulation of graphs in symbolic form, which simplifies specification and reasoning about systems defined in this way, as displayed by two case studies. As a third contribution we build upon the previous work of CPOG synthesis used to generate binary encoding of microcontroller instruction sets and design the corresponding instruction decoder logic. The proposed CPOG synthesis technique solves the optimisation problem for the general case, reducing it to Boolean satisfiability problem and uses existing SAT solving tools to obtain the result.This work was supported by a studentship from Newcastle University EECE school, EPSRC grant EP/G037809/1 (VERDAD) and EPSRC grant EP/K001698/1 (UNCOVER). i

Design of robust asynchronous reconfigurable controllers for parallel synchronization using embedded graphs

PhD Thesis: This is a revised version received 24/5/16. The definitive version is the print copy in the Research Reserve Collection of the University LibrarySynchronization is a key System-on-Chip (SoC) design issue in modern technologies. As the number of operating points under consideration increases, specifications which are capable of altering key parameters such as the time available for synchronization and Mean Time Between Failures (MTBF) in response to input from the user/system become desirable. This thesis explores how a combination of parallelism and scheduling, referred to as wagging, can be utilized to construct schedulers for synchronizer designs which are capable of pooling the gain-bandwidth products of their composite devices, in order to satisfy this requirement. In this work, we explore the ways in which the areas of graph theory and reconfigurable hardware design can be applied to generate both combinational and sequential scheduler designs, which satisfy the behavior requirement above. Further to this point, this work illustrates that such a scheduler is primarily comprised of an interrupt subsystem, and a reconfigurable token ring. This thesis explores how both of these components can be controlled in absence of a clock signal, as well as the design challenges inherent to each part. The final noteworthy issue in this study is with regard to the flow control of data in a parallel synchronizer that incorporates a First-In First-Out (FIFO) buffer to decouple the reading and writing operations from each other. Such a structure incurs penalties if the data rates on both sides are not well matched. This work presents a method by which combinations of serial and parallel reading operations are used to minimize this mismatch

Verification and synthesis of asynchronous control circuits using petri net unfoldings

PhD ThesisDesign of asynchronous control circuits has traditionally been associated with application of formal methods. Event-based models, such as Petri nets, provide a compact and easy to understand way of specifying asynchronous behaviour. However, analysis of their behavioural properties is often hindered by the problem of exponential growth of reachable state space. This work proposes a new method for analysis of asynchronous circuit models based on Petri nets. The new approach is called PN-unfolding segment. It extends and improves existing Petri nets unfolding approaches. In addition, this thesis proposes a new analysis technique for Signal Transition Graphs along with an efficient verification technique which is also based on the Petri net unfolding. The former is called Full State Graph, the latter - STG-unfolding segment. The boolean logic synthesis is an integral part of the asynchronous circuit design process. In many cases, even if the verification of an asynchronous circuit specification has been performed successfully, it is impossible to obtain its implementation using existing methods because they are based on the reachability analysis. A new approach is proposed here for automated synthesis of speed-independent circuits based on the STG-unfolding segment constructed during the verification of the circuit's specification. Finally, this work presents experimental results showing the need for the new Petri net unfolding techniques and confirming the advantages of application of partial order approach to analysis, verification and synthesis of asynchronous circuits.The Research Committee, Newcastle University: Overseas Research Studentship Award

Design And Synthesis Of Clockless Pipelines Based On Self-resetting Stage Logic

For decades, digital design has been primarily dominated by clocked circuits. With larger scales of integration made possible by improved semiconductor manufacturing techniques, relying on a clock signal to orchestrate logic operations across an entire chip became increasingly difficult. Motivated by this problem, designers are currently considering circuits which can operate without a clock. However, the wide acceptance of these circuits by the digital design community requires two ingredients: (i) a unified design methodology supported by widely available CAD tools, and (ii) a granularity of design techniques suitable for synthesizing large designs. Currently, there is no unified established design methodology to support the design and verification of these circuits. Moreover, the majority of clockless design techniques is conceived at circuit level, and is subsequently so fine-grain, that their application to large designs can have unacceptable area costs. Given these considerations, this dissertation presents a new clockless technique, called self-resetting stage logic (SRSL), in which the computation of a block is reset periodically from within the block itself. SRSL is used as a building block for three coarse-grain pipelining techniques: (i) Stage-controlled self-resetting stage logic (S-SRSL) Pipelines: In these pipelines, the control of the communication between stages is performed locally between each pair of stages. This communication is performed in a uni-directional manner in order to simplify its implementation. (ii) Pipeline-controlled self-resetting stage logic (P-SRSL) Pipelines: In these pipelines, the communication between each pair of stages in the pipeline is driven by the oscillation of the last pipeline stage. Their communication scheme is identical to the one used in S-SRSL pipelines. (iii) Delay-tolerant self-resetting stage logic (D-SRSL) Pipelines: While communication in these pipelines is local in nature in a manner similar to the one used in S-SRL pipelines, this communication is nevertheless extended in both directions. The result of this bi-directional approach is an increase in the capability of the pipeline to handle stages with random delay. Based on these pipelining techniques, a new design methodology is proposed to synthesize clockless designs. The synthesis problem consists of synthesizing an SRSL pipeline from a gate netlist with a minimum area overhead given a specified data rate. A two-phase heuristic algorithm is proposed to solve this problem. The goal of the algorithm is to pipeline a given datapath by minimizing the area occupied by inter-stage latches without violating any timing constraints. Experiments with this synthesis algorithm show that while P-SRSL pipelines can reach high throughputs in shallow pipelines, D-SRSL pipelines can achieve comparable throughputs in deeper pipelines

Lazy transition systems and asynchronous circuit synthesis with relative timing assumptions

Journal ArticleThis paper presents a design flow for timed asynchronous circuits. It introduces lazy transitions systems as a new computational model to represent the timing information required for synthesis. The notion of laziness explicitly distinguishes between the enabling and the firing of an event in a transition system. Lazy transition systems can be effectively used to model the behavior of asynchronous circuits in which relative timing assumptions can be made on the occurrence of events. These assumptions can be derived from the information known a priori about the delay of the environment and the timing characteristics of the gates that will implement the circuit. The paper presents necessary conditions to generate circuits and a synthesis algorithm that exploits the timing assumptions for optimization. It also proposes a method for back-annotation that derives a set of sufficient timing constraints that guarantee the correctness of the circuit

Implementation exploration of imaging algorithms on FPGAs

This portfolio thesis documents the work carried out as part of the Engineering Doctorate (EngD) programme undertaken at the Institute for System Level Integration. This work was sponsored and aided by Thales Optronics Ltd, a company well versed in developing specialised electro-optical devices. Field programmable gate arrays (FPGAs) are the devices of choice for custom image processing algorithms due to their reconfigurable nature. This also makes them more economical for low volume production runs where non-recoverable engineering costs are a large factor. Asynchronous circuits have had a remarkable surge in development over the last 20 years, to such an extent that they are beginning to displace conventional designs for niche applications. Their unique ability to adapt to environmental and data dependent processing needs have lead them to out-perform synchronous designs in ASIC platforms for certain applications. Abstract The main body of research was separated into three areas of work presented as three technical documents. The first area of research addresses an FPGA implementation of contrast limited adaptive histogram equalisation (CLAHE), an algorithm which provides increased visual performance over conventional methods. From this, a novel implementation strategy was provided along with the key design factors for future use in a commercial context. The second area of research investigates the ability to create asynchronous circuits on FPGA devices. The main motivation for this work was to establish if any of the benefits which had been demonstrated for ASIC devices can be applied to FPGA devices. The investigation surmised the most suitable asynchronous design style for FPGA devices, a design flow to allow asynchronous circuits to function correctly on FPGAs and novel design strategies to implement consistent and repeatable asynchronous components. The result of this work established a route to implement circuits asynchronously in an FPGA. The final area of research focused on a unique conversion tool that allows synchronous circuits to run asynchronously on FPGAs whilst maintaining the same data flow patterns. This research produced an automated tool capable of implementing circuits on an FPGA asynchronously from their synchronous descriptions. This approach allowed the primary motivators of this work to be addressed. The results of this work show timing, resource utilisation and noise spectrum benefits by implementing circuits asynchronously on FPGA devices